This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Ansaloni, M., Bonazzi, E., Leali, F., Pellicciari, M., & Berselli, G. (2013). Design of fixture systems in automotive manufacturing and assembly. Advanced Materials Research, 712–715, 2913–2916. doi: 10.4028/www.scientific.net/AMR.712-715.2913AnsaloniM.BonazziE.LealiF.PellicciariM.BerselliG.2013Design of fixture systems in automotive manufacturing and assembly712–7152913291610.4028/www.scientific.net/AMR.712-715.2913Open DOISearch in Google Scholar
Bakker, O. J., Papastathis, T. N., Ratchev, S. M., & Popov, A. A. (2013). Recent research on flexible fixtures for manufacturing processes. Recent Patents on Mechanical Engineering, 6(2). doi: 10.2174/2212797611306020003BakkerO. J.PapastathisT. N.RatchevS. M.PopovA. A.2013Recent research on flexible fixtures for manufacturing processes6210.2174/2212797611306020003Open DOISearch in Google Scholar
Basova, Y., Nutsubidze, K., Ivanova, M., Slipchenko, S., & Kotliar, A. (2018). Design and numerical simulation of the new design of the gripper for manipulating of the rotational parts. Diagnostyka, 19(4), 11–18. doi: 10.29354/diag/94030BasovaY.NutsubidzeK.IvanovaM.SlipchenkoS.KotliarA.2018Design and numerical simulation of the new design of the gripper for manipulating of the rotational parts194111810.29354/diag/94030Open DOISearch in Google Scholar
Brettel, M., Klein, M., & Friederichsen, N. (2016). The relevance of manufacturing flexibility in the context of Industrie 4.0. Procedia CIRP, 41, 105–110. doi: 10.1016/j.procir.2015.12.047BrettelM.KleinM.FriederichsenN.2016The relevance of manufacturing flexibility in the context of Industrie 4.04110511010.1016/j.procir.2015.12.047Open DOISearch in Google Scholar
Bi, Z. M., & Zhang, W. J. (2001). Flexible fixture design and automation: Review, issues and future directions. International Journal of Production Research, 39(13), 2867–2894. doi: 10.1080/00207540110054579BiZ. M.ZhangW. J.2001Flexible fixture design and automation: Review, issues and future directions39132867289410.1080/00207540110054579Open DOISearch in Google Scholar
Dehtiarov, I. M. (2017). Technological support of lever-type part machining in batch manufacturing using flexible fixtures. Ph.D. thesis, Manugacturing Engineering. Kharkiv, Ukraine: National Technical University “Kharkiv Polytechnic Institute”.DehtiarovI. M.2017Ph.D. thesis, Manugacturing Engineering.Kharkiv, UkraineNational Technical University “Kharkiv Polytechnic Institute”Search in Google Scholar
Denysenko, Y., Dynnyk, O., Yashyna, T., Malovana, N., & Zaloga, V. (2019). Implementation of CALS-technologies in quality management of product life cycle processes. In V. Ivanov et al. (Eds.), Advances in Design, Simulation and Manufacturing. DSMIE-2018. Lecture Notes in Mechanical Engineering (pp. 3–12). Cham, UK: Springer. doi: 10.1007/978-3-319-93587-4_1DenysenkoY.DynnykO.YashynaT.MalovanaN.ZalogaV.2019Implementation of CALS-technologies in quality management of product life cycle processesInIvanovV.(Eds.),312Cham, UKSpringer10.1007/978-3-319-93587-4_1Open DOISearch in Google Scholar
Dynnyk, O., Denysenko, Y., Zaloga, V., Ivchenko, O., & Yashyna, T. (2020). Information support for the quality management system assessment of engineering enterprises. In V. Ivanov et al. (Eds.), Advances in Design, Simulation and Manufacturing II. DSMIE-2019. Lecture Notes in Mechanical Engineering (pp. 65–74). Cham, UK: Springer. doi: 10.1007/978-3-030-22365-6_7DynnykO.DenysenkoY.ZalogaV.IvchenkoO.YashynaT.2020Information support for the quality management system assessment of engineering enterprisesInIvanovV.(Eds.),6574Cham, UKSpringer10.1007/978-3-030-22365-6_7Open DOISearch in Google Scholar
Elkins, D. A., Huang, N., & Alden, J. M. (2004). Agile manufacturing systems in the automotive industry. International Journal of Production Economics, 91, 201–214.ElkinsD. A.HuangN.AldenJ. M.2004Agile manufacturing systems in the automotive industry9120121410.1016/j.ijpe.2003.07.006Search in Google Scholar
Erdem, I. (2020). Efficiency of flexible fixtures: design and control. Ph.D. thesis, Industrial and Materials Science. Gothenburg, Sweden: Chalmers University of Technology.ErdemI.2020Ph.D. thesis, Industrial and Materials Science.Gothenburg, SwedenChalmers University of TechnologySearch in Google Scholar
Erdem, I., Levandowski, C., Berlin, C., Kihlman, H., & Stahre, J. (2017). A novel comparative design procedure for reconfigurable assembly fixtures. CIRP Journal of Manufacturing Science and Technology, 19, 93–105. doi: 10.1016/j.cirpj.2017.06.004ErdemI.LevandowskiC.BerlinC.KihlmanH.StahreJ.2017A novel comparative design procedure for reconfigurable assembly fixtures199310510.1016/j.cirpj.2017.06.004Open DOISearch in Google Scholar
Förstmann, R., Wagner, J., Kreisköther, K., Kampker, A., & Busch, D. (2017). Design for automation: the rapid fixture approach. Procedia Manufacturing, 11, 633–640. doi: 10.1016/j.promfg.2017.07.161FörstmannR.WagnerJ.KreiskötherK.KampkerA.BuschD.2017Design for automation: the rapid fixture approach1163364010.1016/j.promfg.2017.07.161Open DOISearch in Google Scholar
Ganesan, H., & Mohankumar, G. (2013). Optimization of machining techniques in CNC turning centre using genetic algorithm. Arabian Journal for Science and Engineering, 38, 1529–1538. doi: 10.1007/s13369-013-0539-8GanesanH.MohankumarG.2013Optimization of machining techniques in CNC turning centre using genetic algorithm381529153810.1007/s13369-013-0539-8Open DOISearch in Google Scholar
Hasan, F., Jain, P. K., & Kumar, D. (2014). Service level as performance index for reconfigurable manufacturing system involving multiple part families. In B. Katalinic (Ed.), 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013 Procedia Engineering, pp. 814–821. doi: 10.1016/j.proeng.2014.03.058HasanF.JainP. K.KumarD.2014Service level as performance index for reconfigurable manufacturing system involving multiple part familiesInKatalinicB.(Ed.)81482110.1016/j.proeng.2014.03.058Open DOISearch in Google Scholar
Hashemi, H., Shaharoun, A. M., & Sudin, I. (2014). A case-based reasoning approach for design of machining fixture. International Journal of Advanced Manufacturing Technology, 74(1–4), 113–124. doi: 10.1007/s00170-014-5930-4HashemiH.ShaharounA. M.SudinI.2014A case-based reasoning approach for design of machining fixture741–411312410.1007/s00170-014-5930-4Open DOISearch in Google Scholar
Ivanov, V., Dehtiarov, I., Pavlenko, I., Kosov, I., & Kosov, M. (2019). Technology for complex parts machining in multiproduct manufacturing. Management and Production Engineering Review, 10(2), 25–36. doi: 10.24425/mper.2019.129566IvanovV.DehtiarovI.PavlenkoI.KosovI.KosovM.2019Technology for complex parts machining in multiproduct manufacturing102253610.24425/mper.2019.129566Open DOISearch in Google Scholar
Ji, Y., Chen, X., Qi, G., & Song, L. (2013). Modular design involving effectiveness of multiple phases for product life cycle. International Journal of Advanced Manufacturing Technology, 66, 1475–1488. doi: 10.1007/s00170-012-4432-5JiY.ChenX.QiG.SongL.2013Modular design involving effectiveness of multiple phases for product life cycle661475148810.1007/s00170-012-4432-5Open DOISearch in Google Scholar
Kostyuk, G. (2019). Prediction of the microhardness characteristics, the removable material volume for the durability period, cutting tools durability and processing productivity depending on the grain size of the coating or cutting tool base material. In B. Gapiński, M. Szostak, V. Ivanov (Eds.), Advances in Manufacturing II. MANUFACTURING 2019. Lecture Notes in Mechanical Engineering (pp. 300–316). Cham, UK: Springer. doi: 10.1007/978-3-030-16943-5_27KostyukG.2019Prediction of the microhardness characteristics, the removable material volume for the durability period, cutting tools durability and processing productivity depending on the grain size of the coating or cutting tool base materialInGapińskiB.SzostakM.IvanovV.(Eds.),300316Cham, UKSpringer10.1007/978-3-030-16943-5_27Open DOISearch in Google Scholar
Kostyuk, G., Nechyporuk, M., & Kostyk, K. (2019). Determination of technological parameters for obtaining nanostructures under pulse laser radiation on steel of drone engine parts. 10th International Conference on Dependable Systems, Services and Technologies, DESSERT 2019: Institute of Electrical and Electronics Engineers Inc., 208–212. doi: 10.1109/DESSERT.2019.8770053KostyukG.NechyporukM.KostykK.201910th International Conference on Dependable Systems, Services and Technologies, DESSERT 2019Institute of Electrical and Electronics Engineers Inc.20821210.1109/DESSERT.2019.8770053Open DOISearch in Google Scholar
Kotliar, A., Basova, Y., Ivanova, M., Gasanov, M., & Sazhniev, I. (2019a). Technological assurance of machining accuracy of crankshaft. In M. Diering, M. Wieczorowski, & C. Brown (Eds.), Advances in Manufacturing II. MANUFACTURING 2019. Lecture Notes in Mechanical Engineering (pp. 37–51). Cham, UK: Springer. doi: 10.1007/978-3-030-18682-1_4KotliarA.BasovaY.IvanovaM.GasanovM.SazhnievI.2019aTechnological assurance of machining accuracy of crankshaftInDieringM.WieczorowskiM.BrownC.(Eds.),3751Cham, UKSpringer10.1007/978-3-030-18682-1_4Open DOISearch in Google Scholar
Kotliar, A., Gasanov, M., Basova, Y., Panamariova, O., & Gubskyi, S. (2019b). Ensuring the reliability and performance criterias of crankshafts. Diagnostyka, 20(1), 23–32. doi: 10.29354/diag/99605KotliarA.GasanovM.BasovaY.PanamariovaO.GubskyiS.2019bEnsuring the reliability and performance criterias of crankshafts201233210.29354/diag/99605Open DOISearch in Google Scholar
Krol, O., & Sokolov, V. (2018). Development of models and research into tooling for machining centers. Eastern-European Journal of Enterprise Technologies, 3(1–93), 12–22. doi: 10.15587/1729-4061.2018.131778KrolO.SokolovV.2018Development of models and research into tooling for machining centers31–93122210.15587/1729-4061.2018.131778Open DOISearch in Google Scholar
Li, H., Chen, W., & Shi, S. (2016). Design and application of flexible fixture. Procedia CIRP, 56, 528–532. doi: 10.1016/j.procir.2016.10.104LiH.ChenW.ShiS.2016Design and application of flexible fixture5652853210.1016/j.procir.2016.10.104Open DOISearch in Google Scholar
Li, M. (2007). Efficiency measurement for multi-dimensional group technology. International Journal of Advanced Manufacturing Technology, 35, 621–632. doi: 10.1007/s00170-006-0734-9LiM.2007Efficiency measurement for multi-dimensional group technology3562163210.1007/s00170-006-0734-9Open DOISearch in Google Scholar
Matteo, A., Enrico, B., Francesco, L., Marcello, P., & Berselli, G. (2013). Design of fixture systems in automotive manufacturing and assembly. In X. Liu, K. Zhang, & M. Li (Eds.) Advances in Manufacturing Science and Engineering, Pts 1–4 Advanced Materials Research, pp. 2913–2916. doi: 10.4028/www.scientific.net/AMR.712-715.2913MatteoA.EnricoB.FrancescoL.MarcelloP.BerselliG.2013Design of fixture systems in automotive manufacturing and assemblyInLiuX.ZhangK.LiM.(Eds.)2913291610.4028/www.scientific.net/AMR.712-715.2913Open DOISearch in Google Scholar
Mehrabi, M. G., Ulsoy, A. G., Koren, Y., & Heytler, P. (2002). Trends and perspectives in flexible and reconfigurable manufacturing systems. Journal of Intelligent Manufacturing, 13(2), 135–146. doi: 10.1023/A:1014536330551MehrabiM. G.UlsoyA. G.KorenY.HeytlerP.2002Trends and perspectives in flexible and reconfigurable manufacturing systems13213514610.1023/A:1014536330551Open DOISearch in Google Scholar
Neely, A. (1999). The performance measurement revolution: Why now and what next? International Journal of Operations and Production Management, 19, 205–228.NeelyA.1999The performance measurement revolution: Why now and what next?1920522810.1108/01443579910247437Search in Google Scholar
Nixon, F. (1971). Managing to achieve quality and reliability. New York, London: McGraw-Hill.NixonF.1971New York, LondonMcGraw-HillSearch in Google Scholar
McIntosh, R. I., Culley, S. J., Mileham, A. R., & Owen, G. W. (2000). A critical evaluation of Shingo's ‘SMED’ (Single Minute Exchange of Die) methodology. International Journal of Production Research, 38, 2377–2395.McIntoshR. I.CulleyS. J.MilehamA. R.OwenG. W.2000A critical evaluation of Shingo's ‘SMED’ (Single Minute Exchange of Die) methodology382377239510.1080/00207540050031823Search in Google Scholar
Qin, G. H., Zhang, W. H., Wan, V., & Sun, S. P. (2010). A novel approach to fixture design based on locating correctness. International Journal of Manufacturing Research, 5(4), 429–448. doi: 10.1504/IJMR.2010.035812QinG. H.ZhangW. H.WanV.SunS. P.2010A novel approach to fixture design based on locating correctness5442944810.1504/IJMR.2010.035812Open DOISearch in Google Scholar
Rong, Y., & Zhu, Y. (1999). Computer-aided fixture design. Manufacturing engineering and materials processing New York, USA: Marcel Dekker.RongY.ZhuY.1999New York, USAMarcel Dekker10.1201/9781482273779Search in Google Scholar
Sarker, B.R., & Khan, M. A (2001). Comparison of existing grouping efficiency measures and a new weighted grouping efficiency measure. IIE Transactions, 33, 11–27. doi: 10.1023/A:1007633622787SarkerB.R.KhanM. A2001Comparison of existing grouping efficiency measures and a new weighted grouping efficiency measure33112710.1023/A:1007633622787Open DOISearch in Google Scholar
Setchi, R. M., & Lagos, N. (2004). Reconfigurability and reconfigurable manufacturing systems - State-of-the-art review. 2004 2nd Ieee International Conference on Industrial Informatics: Collaborative Automation - One Key for Intelligent Industrial Environments.SetchiR. M.LagosN.20042004 2nd Ieee International Conference on Industrial Informatics: Collaborative Automation - One Key for Intelligent Industrial EnvironmentsSearch in Google Scholar
Shaik, A. M., Rao, V., & Rao, C. S. (2015). Development of modular manufacturing systems-a review. International Journal of Advanced Manufacturing Technology, 76(5–8), pp. 789–802. doi: 10.1007/s00170-014-6289-2.ShaikA. M.RaoV.RaoC. S.2015Development of modular manufacturing systems-a review765–878980210.1007/s00170-014-6289-2Open DOISearch in Google Scholar
Sokolov, V., Krol, O., & Baturin, Y. (2019). Dynamics research and automatic control of technological equipment with electrohydraulic drive. 2019 International Russian Automation Conference, RusAutoCon 2019: Institute of Electrical and Electronics Engineers Inc.SokolovV.KrolO.BaturinY.20192019 International Russian Automation Conference, RusAutoCon 2019Institute of Electrical and Electronics Engineers Inc.Search in Google Scholar
Son, Y. K., &Park, C. P. (1987). Economic measure of productivity, quality and flexibility in advanced manufacturing systems. Journal of Manufacturing Systems, 6(3), 193–207. doi: 10.1016/0278-6125(87)90018-5.SonY. K.ParkC. P.1987Economic measure of productivity, quality and flexibility in advanced manufacturing systems6319320710.1016/0278-6125(87)90018-5Open DOISearch in Google Scholar
Sonmez, V., Testik, M. C. & Testik, O. M. (2018). Overall equipment effectiveness when production speeds and stoppage durations are uncertain. International Journal of Advanced Manufacturing Technology, 95, 121–130. doi: 10.1007/s00170-017-1170-8SonmezV.TestikM. C.TestikO. M.2018Overall equipment effectiveness when production speeds and stoppage durations are uncertain9512113010.1007/s00170-017-1170-8Open DOISearch in Google Scholar
Stepanov, M., Ivanova, L., Litovchenko, P., Ivanova, M., & Basova, Y. (2019). Model of thermal state of the system of application of coolant in grinding machine. In: Ivanov V. et al. (eds), Advances in Design, Simulation and Manufacturing. DSMIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. pp. 156–165. doi: 10.1007/978-3-319-93587-4_17StepanovM.IvanovaL.LitovchenkoP.IvanovaM.BasovaY.2019Model of thermal state of the system of application of coolant in grinding machineIn:IvanovV.(eds),SpringerCham15616510.1007/978-3-319-93587-4_17Open DOISearch in Google Scholar
Yarovyi, Y., & Yarova, I. (2020). Energy criterion for metal machining methods. In: Ivanov V. et al. (eds), Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. pp. 378–387. doi: 10.1007/978-3-030-22365-6_38YarovyiY.YarovaI.2020Energy criterion for metal machining methodsIn:IvanovV.(eds),SpringerCham37838710.1007/978-3-030-22365-6_38Open DOISearch in Google Scholar