This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Ansaloni, M., Bonazzi, E., Leali, F., Pellicciari, M., & Berselli, G. (2013). Design of fixture systems in automotive manufacturing and assembly. Advanced Materials Research, 712–715, 2913–2916. doi: 10.4028/www.scientific.net/AMR.712-715.2913AnsaloniM.BonazziE.LealiF.PellicciariM.BerselliG.2013Design of fixture systems in automotive manufacturing and assemblyAdvanced Materials Research712–7152913291610.4028/www.scientific.net/AMR.712-715.2913Open DOISearch in Google Scholar
Bakker, O. J., Papastathis, T. N., Ratchev, S. M., & Popov, A. A. (2013). Recent research on flexible fixtures for manufacturing processes. Recent Patents on Mechanical Engineering, 6(2). doi: 10.2174/2212797611306020003BakkerO. J.PapastathisT. N.RatchevS. M.PopovA. A.2013Recent research on flexible fixtures for manufacturing processesRecent Patents on Mechanical Engineering6210.2174/2212797611306020003Open DOISearch in Google Scholar
Basova, Y., Nutsubidze, K., Ivanova, M., Slipchenko, S., & Kotliar, A. (2018). Design and numerical simulation of the new design of the gripper for manipulating of the rotational parts. Diagnostyka, 19(4), 11–18. doi: 10.29354/diag/94030BasovaY.NutsubidzeK.IvanovaM.SlipchenkoS.KotliarA.2018Design and numerical simulation of the new design of the gripper for manipulating of the rotational partsDiagnostyka194111810.29354/diag/94030Open DOISearch in Google Scholar
Brettel, M., Klein, M., & Friederichsen, N. (2016). The relevance of manufacturing flexibility in the context of Industrie 4.0. Procedia CIRP, 41, 105–110. doi: 10.1016/j.procir.2015.12.047BrettelM.KleinM.FriederichsenN.2016The relevance of manufacturing flexibility in the context of Industrie 4.0Procedia CIRP4110511010.1016/j.procir.2015.12.047Open DOISearch in Google Scholar
Bi, Z. M., & Zhang, W. J. (2001). Flexible fixture design and automation: Review, issues and future directions. International Journal of Production Research, 39(13), 2867–2894. doi: 10.1080/00207540110054579BiZ. M.ZhangW. J.2001Flexible fixture design and automation: Review, issues and future directionsInternational Journal of Production Research39132867289410.1080/00207540110054579Open DOISearch in Google Scholar
Dehtiarov, I. M. (2017). Technological support of lever-type part machining in batch manufacturing using flexible fixtures. Ph.D. thesis, Manugacturing Engineering. Kharkiv, Ukraine: National Technical University “Kharkiv Polytechnic Institute”.DehtiarovI. M.2017Technological support of lever-type part machining in batch manufacturing using flexible fixturesPh.D. thesis, Manugacturing Engineering.Kharkiv, UkraineNational Technical University “Kharkiv Polytechnic Institute”Search in Google Scholar
Denysenko, Y., Dynnyk, O., Yashyna, T., Malovana, N., & Zaloga, V. (2019). Implementation of CALS-technologies in quality management of product life cycle processes. In V. Ivanov et al. (Eds.), Advances in Design, Simulation and Manufacturing. DSMIE-2018. Lecture Notes in Mechanical Engineering (pp. 3–12). Cham, UK: Springer. doi: 10.1007/978-3-319-93587-4_1DenysenkoY.DynnykO.YashynaT.MalovanaN.ZalogaV.2019Implementation of CALS-technologies in quality management of product life cycle processesInIvanovV.(Eds.),Advances in Design, Simulation and Manufacturing. DSMIE-2018. Lecture Notes in Mechanical Engineering312Cham, UKSpringer10.1007/978-3-319-93587-4_1Open DOISearch in Google Scholar
Dynnyk, O., Denysenko, Y., Zaloga, V., Ivchenko, O., & Yashyna, T. (2020). Information support for the quality management system assessment of engineering enterprises. In V. Ivanov et al. (Eds.), Advances in Design, Simulation and Manufacturing II. DSMIE-2019. Lecture Notes in Mechanical Engineering (pp. 65–74). Cham, UK: Springer. doi: 10.1007/978-3-030-22365-6_7DynnykO.DenysenkoY.ZalogaV.IvchenkoO.YashynaT.2020Information support for the quality management system assessment of engineering enterprisesInIvanovV.(Eds.),Advances in Design, Simulation and Manufacturing II. DSMIE-2019. Lecture Notes in Mechanical Engineering6574Cham, UKSpringer10.1007/978-3-030-22365-6_7Open DOISearch in Google Scholar
Elkins, D. A., Huang, N., & Alden, J. M. (2004). Agile manufacturing systems in the automotive industry. International Journal of Production Economics, 91, 201–214.ElkinsD. A.HuangN.AldenJ. M.2004Agile manufacturing systems in the automotive industryInternational Journal of Production Economics9120121410.1016/j.ijpe.2003.07.006Search in Google Scholar
Erdem, I. (2020). Efficiency of flexible fixtures: design and control. Ph.D. thesis, Industrial and Materials Science. Gothenburg, Sweden: Chalmers University of Technology.ErdemI.2020Efficiency of flexible fixtures: design and controlPh.D. thesis, Industrial and Materials Science.Gothenburg, SwedenChalmers University of TechnologySearch in Google Scholar
Erdem, I., Levandowski, C., Berlin, C., Kihlman, H., & Stahre, J. (2017). A novel comparative design procedure for reconfigurable assembly fixtures. CIRP Journal of Manufacturing Science and Technology, 19, 93–105. doi: 10.1016/j.cirpj.2017.06.004ErdemI.LevandowskiC.BerlinC.KihlmanH.StahreJ.2017A novel comparative design procedure for reconfigurable assembly fixturesCIRP Journal of Manufacturing Science and Technology199310510.1016/j.cirpj.2017.06.004Open DOISearch in Google Scholar
Förstmann, R., Wagner, J., Kreisköther, K., Kampker, A., & Busch, D. (2017). Design for automation: the rapid fixture approach. Procedia Manufacturing, 11, 633–640. doi: 10.1016/j.promfg.2017.07.161FörstmannR.WagnerJ.KreiskötherK.KampkerA.BuschD.2017Design for automation: the rapid fixture approachProcedia Manufacturing1163364010.1016/j.promfg.2017.07.161Open DOISearch in Google Scholar
Ganesan, H., & Mohankumar, G. (2013). Optimization of machining techniques in CNC turning centre using genetic algorithm. Arabian Journal for Science and Engineering, 38, 1529–1538. doi: 10.1007/s13369-013-0539-8GanesanH.MohankumarG.2013Optimization of machining techniques in CNC turning centre using genetic algorithmArabian Journal for Science and Engineering381529153810.1007/s13369-013-0539-8Open DOISearch in Google Scholar
Hasan, F., Jain, P. K., & Kumar, D. (2014). Service level as performance index for reconfigurable manufacturing system involving multiple part families. In B. Katalinic (Ed.), 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013 Procedia Engineering, pp. 814–821. doi: 10.1016/j.proeng.2014.03.058HasanF.JainP. K.KumarD.2014Service level as performance index for reconfigurable manufacturing system involving multiple part familiesInKatalinicB.(Ed.)24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013 Procedia Engineering81482110.1016/j.proeng.2014.03.058Open DOISearch in Google Scholar
Hashemi, H., Shaharoun, A. M., & Sudin, I. (2014). A case-based reasoning approach for design of machining fixture. International Journal of Advanced Manufacturing Technology, 74(1–4), 113–124. doi: 10.1007/s00170-014-5930-4HashemiH.ShaharounA. M.SudinI.2014A case-based reasoning approach for design of machining fixtureInternational Journal of Advanced Manufacturing Technology741–411312410.1007/s00170-014-5930-4Open DOISearch in Google Scholar
Ivanov, V., Dehtiarov, I., Pavlenko, I., Kosov, I., & Kosov, M. (2019). Technology for complex parts machining in multiproduct manufacturing. Management and Production Engineering Review, 10(2), 25–36. doi: 10.24425/mper.2019.129566IvanovV.DehtiarovI.PavlenkoI.KosovI.KosovM.2019Technology for complex parts machining in multiproduct manufacturingManagement and Production Engineering Review102253610.24425/mper.2019.129566Open DOISearch in Google Scholar
Ji, Y., Chen, X., Qi, G., & Song, L. (2013). Modular design involving effectiveness of multiple phases for product life cycle. International Journal of Advanced Manufacturing Technology, 66, 1475–1488. doi: 10.1007/s00170-012-4432-5JiY.ChenX.QiG.SongL.2013Modular design involving effectiveness of multiple phases for product life cycleInternational Journal of Advanced Manufacturing Technology661475148810.1007/s00170-012-4432-5Open DOISearch in Google Scholar
Kostyuk, G. (2019). Prediction of the microhardness characteristics, the removable material volume for the durability period, cutting tools durability and processing productivity depending on the grain size of the coating or cutting tool base material. In B. Gapiński, M. Szostak, V. Ivanov (Eds.), Advances in Manufacturing II. MANUFACTURING 2019. Lecture Notes in Mechanical Engineering (pp. 300–316). Cham, UK: Springer. doi: 10.1007/978-3-030-16943-5_27KostyukG.2019Prediction of the microhardness characteristics, the removable material volume for the durability period, cutting tools durability and processing productivity depending on the grain size of the coating or cutting tool base materialInGapińskiB.SzostakM.IvanovV.(Eds.),Advances in Manufacturing II. MANUFACTURING 2019. Lecture Notes in Mechanical Engineering300316Cham, UKSpringer10.1007/978-3-030-16943-5_27Open DOISearch in Google Scholar
Kostyuk, G., Nechyporuk, M., & Kostyk, K. (2019). Determination of technological parameters for obtaining nanostructures under pulse laser radiation on steel of drone engine parts. 10th International Conference on Dependable Systems, Services and Technologies, DESSERT 2019: Institute of Electrical and Electronics Engineers Inc., 208–212. doi: 10.1109/DESSERT.2019.8770053KostyukG.NechyporukM.KostykK.2019Determination of technological parameters for obtaining nanostructures under pulse laser radiation on steel of drone engine parts10th International Conference on Dependable Systems, Services and Technologies, DESSERT 2019Institute of Electrical and Electronics Engineers Inc.20821210.1109/DESSERT.2019.8770053Open DOISearch in Google Scholar
Kotliar, A., Basova, Y., Ivanova, M., Gasanov, M., & Sazhniev, I. (2019a). Technological assurance of machining accuracy of crankshaft. In M. Diering, M. Wieczorowski, & C. Brown (Eds.), Advances in Manufacturing II. MANUFACTURING 2019. Lecture Notes in Mechanical Engineering (pp. 37–51). Cham, UK: Springer. doi: 10.1007/978-3-030-18682-1_4KotliarA.BasovaY.IvanovaM.GasanovM.SazhnievI.2019aTechnological assurance of machining accuracy of crankshaftInDieringM.WieczorowskiM.BrownC.(Eds.),Advances in Manufacturing II. MANUFACTURING 2019. Lecture Notes in Mechanical Engineering3751Cham, UKSpringer10.1007/978-3-030-18682-1_4Open DOISearch in Google Scholar
Kotliar, A., Gasanov, M., Basova, Y., Panamariova, O., & Gubskyi, S. (2019b). Ensuring the reliability and performance criterias of crankshafts. Diagnostyka, 20(1), 23–32. doi: 10.29354/diag/99605KotliarA.GasanovM.BasovaY.PanamariovaO.GubskyiS.2019bEnsuring the reliability and performance criterias of crankshaftsDiagnostyka201233210.29354/diag/99605Open DOISearch in Google Scholar
Krol, O., & Sokolov, V. (2018). Development of models and research into tooling for machining centers. Eastern-European Journal of Enterprise Technologies, 3(1–93), 12–22. doi: 10.15587/1729-4061.2018.131778KrolO.SokolovV.2018Development of models and research into tooling for machining centersEastern-European Journal of Enterprise Technologies31–93122210.15587/1729-4061.2018.131778Open DOISearch in Google Scholar
Li, H., Chen, W., & Shi, S. (2016). Design and application of flexible fixture. Procedia CIRP, 56, 528–532. doi: 10.1016/j.procir.2016.10.104LiH.ChenW.ShiS.2016Design and application of flexible fixtureProcedia CIRP5652853210.1016/j.procir.2016.10.104Open DOISearch in Google Scholar
Li, M. (2007). Efficiency measurement for multi-dimensional group technology. International Journal of Advanced Manufacturing Technology, 35, 621–632. doi: 10.1007/s00170-006-0734-9LiM.2007Efficiency measurement for multi-dimensional group technologyInternational Journal of Advanced Manufacturing Technology3562163210.1007/s00170-006-0734-9Open DOISearch in Google Scholar
Matteo, A., Enrico, B., Francesco, L., Marcello, P., & Berselli, G. (2013). Design of fixture systems in automotive manufacturing and assembly. In X. Liu, K. Zhang, & M. Li (Eds.) Advances in Manufacturing Science and Engineering, Pts 1–4 Advanced Materials Research, pp. 2913–2916. doi: 10.4028/www.scientific.net/AMR.712-715.2913MatteoA.EnricoB.FrancescoL.MarcelloP.BerselliG.2013Design of fixture systems in automotive manufacturing and assemblyInLiuX.ZhangK.LiM.(Eds.)Advances in Manufacturing Science and Engineering, Pts 1–4 Advanced Materials Research2913291610.4028/www.scientific.net/AMR.712-715.2913Open DOISearch in Google Scholar
Mehrabi, M. G., Ulsoy, A. G., Koren, Y., & Heytler, P. (2002). Trends and perspectives in flexible and reconfigurable manufacturing systems. Journal of Intelligent Manufacturing, 13(2), 135–146. doi: 10.1023/A:1014536330551MehrabiM. G.UlsoyA. G.KorenY.HeytlerP.2002Trends and perspectives in flexible and reconfigurable manufacturing systemsJournal of Intelligent Manufacturing13213514610.1023/A:1014536330551Open DOISearch in Google Scholar
Neely, A. (1999). The performance measurement revolution: Why now and what next? International Journal of Operations and Production Management, 19, 205–228.NeelyA.1999The performance measurement revolution: Why now and what next?International Journal of Operations and Production Management1920522810.1108/01443579910247437Search in Google Scholar
Nixon, F. (1971). Managing to achieve quality and reliability. New York, London: McGraw-Hill.NixonF.1971Managing to achieve quality and reliabilityNew York, LondonMcGraw-HillSearch in Google Scholar
McIntosh, R. I., Culley, S. J., Mileham, A. R., & Owen, G. W. (2000). A critical evaluation of Shingo's ‘SMED’ (Single Minute Exchange of Die) methodology. International Journal of Production Research, 38, 2377–2395.McIntoshR. I.CulleyS. J.MilehamA. R.OwenG. W.2000A critical evaluation of Shingo's ‘SMED’ (Single Minute Exchange of Die) methodologyInternational Journal of Production Research382377239510.1080/00207540050031823Search in Google Scholar
Qin, G. H., Zhang, W. H., Wan, V., & Sun, S. P. (2010). A novel approach to fixture design based on locating correctness. International Journal of Manufacturing Research, 5(4), 429–448. doi: 10.1504/IJMR.2010.035812QinG. H.ZhangW. H.WanV.SunS. P.2010A novel approach to fixture design based on locating correctnessInternational Journal of Manufacturing Research5442944810.1504/IJMR.2010.035812Open DOISearch in Google Scholar
Rong, Y., & Zhu, Y. (1999). Computer-aided fixture design. Manufacturing engineering and materials processing New York, USA: Marcel Dekker.RongY.ZhuY.1999Computer-aided fixture design. Manufacturing engineering and materials processingNew York, USAMarcel Dekker10.1201/9781482273779Search in Google Scholar
Sarker, B.R., & Khan, M. A (2001). Comparison of existing grouping efficiency measures and a new weighted grouping efficiency measure. IIE Transactions, 33, 11–27. doi: 10.1023/A:1007633622787SarkerB.R.KhanM. A2001Comparison of existing grouping efficiency measures and a new weighted grouping efficiency measureIIE Transactions33112710.1023/A:1007633622787Open DOISearch in Google Scholar
Setchi, R. M., & Lagos, N. (2004). Reconfigurability and reconfigurable manufacturing systems - State-of-the-art review. 2004 2nd Ieee International Conference on Industrial Informatics: Collaborative Automation - One Key for Intelligent Industrial Environments.SetchiR. M.LagosN.2004Reconfigurability and reconfigurable manufacturing systems - State-of-the-art review2004 2nd Ieee International Conference on Industrial Informatics: Collaborative Automation - One Key for Intelligent Industrial EnvironmentsSearch in Google Scholar
Shaik, A. M., Rao, V., & Rao, C. S. (2015). Development of modular manufacturing systems-a review. International Journal of Advanced Manufacturing Technology, 76(5–8), pp. 789–802. doi: 10.1007/s00170-014-6289-2.ShaikA. M.RaoV.RaoC. S.2015Development of modular manufacturing systems-a reviewInternational Journal of Advanced Manufacturing Technology765–878980210.1007/s00170-014-6289-2Open DOISearch in Google Scholar
Sokolov, V., Krol, O., & Baturin, Y. (2019). Dynamics research and automatic control of technological equipment with electrohydraulic drive. 2019 International Russian Automation Conference, RusAutoCon 2019: Institute of Electrical and Electronics Engineers Inc.SokolovV.KrolO.BaturinY.2019Dynamics research and automatic control of technological equipment with electrohydraulic drive2019 International Russian Automation Conference, RusAutoCon 2019Institute of Electrical and Electronics Engineers Inc.Search in Google Scholar
Son, Y. K., &Park, C. P. (1987). Economic measure of productivity, quality and flexibility in advanced manufacturing systems. Journal of Manufacturing Systems, 6(3), 193–207. doi: 10.1016/0278-6125(87)90018-5.SonY. K.ParkC. P.1987Economic measure of productivity, quality and flexibility in advanced manufacturing systemsJournal of Manufacturing Systems6319320710.1016/0278-6125(87)90018-5Open DOISearch in Google Scholar
Sonmez, V., Testik, M. C. & Testik, O. M. (2018). Overall equipment effectiveness when production speeds and stoppage durations are uncertain. International Journal of Advanced Manufacturing Technology, 95, 121–130. doi: 10.1007/s00170-017-1170-8SonmezV.TestikM. C.TestikO. M.2018Overall equipment effectiveness when production speeds and stoppage durations are uncertainInternational Journal of Advanced Manufacturing Technology9512113010.1007/s00170-017-1170-8Open DOISearch in Google Scholar
Stepanov, M., Ivanova, L., Litovchenko, P., Ivanova, M., & Basova, Y. (2019). Model of thermal state of the system of application of coolant in grinding machine. In: Ivanov V. et al. (eds), Advances in Design, Simulation and Manufacturing. DSMIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. pp. 156–165. doi: 10.1007/978-3-319-93587-4_17StepanovM.IvanovaL.LitovchenkoP.IvanovaM.BasovaY.2019Model of thermal state of the system of application of coolant in grinding machineIn:IvanovV.(eds),Advances in Design, Simulation and Manufacturing. DSMIE 2018. Lecture Notes in Mechanical EngineeringSpringerCham15616510.1007/978-3-319-93587-4_17Open DOISearch in Google Scholar
Yarovyi, Y., & Yarova, I. (2020). Energy criterion for metal machining methods. In: Ivanov V. et al. (eds), Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. pp. 378–387. doi: 10.1007/978-3-030-22365-6_38YarovyiY.YarovaI.2020Energy criterion for metal machining methodsIn:IvanovV.(eds),Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical EngineeringSpringerCham37838710.1007/978-3-030-22365-6_38Open DOISearch in Google Scholar
, 