[Bajpai, P., 2018. Paper Manufacture - Wet End Operation, In: Biermann’s Handbook of Pulp and Paper, Vol. 2: Paper and Board Making, Elsevier Inc., Amsterdam, Netherlands, https://doi.org/10.1016/B978-0-12-814238-7.00005-2.10.1016/B978-0-12-814238-7.00005-2]Search in Google Scholar
[Bojic, N., Jugovic, Z., Dragicevic, S., Slavkovic, R., 2012. Comparative Study of the Tensile Stress of Diagonal Sieves Produced by Plasma Welding and Hard Soldering Process, Metalurgia International, 17(5), 25-29.]Search in Google Scholar
[Bojić, N., Nikolić, R., Manojlović, G., 2019. Conformity of finished forming sieves for paper industry, Production Engineering Archives, 24, 29-32.10.30657/pea.2019.24.07]Search in Google Scholar
[Botonjić, Š., 2017. Production of cellulose and paper, theory and practice, Metallurgical-Technological Faculty, University of Zenica, Bosnia and Herzegovina. (In Bosnian).]Search in Google Scholar
[Chu, D., Forbes, M., Backström, J., Gheorghe, C., Chu, S., 2011. Model Predictive Control and Optimization for Papermaking Processes, In: Advanced Model Predictive Control, Edited by Tao Zheng, IntechOpen Limited, London, UK.10.5772/18535]Search in Google Scholar
[Drummond, D. M. D., Rodrigues, M. T. M., Grossmann, I. E., Guirardello, R. 2010. Optimization of water removal in the press section of a paper machine, Brazilian Journal of Chemical Engineering, 27(02), 275-288.]Search in Google Scholar
[Duraković, H., Muftić, A., Husić, E., 2018. Influence of cellulose fiber on mechanical properties of the Sack Kraft paper, XXIII International Symposium in the Fields of Pulp, Paper, Packaging and Graphics, Zlatibor, Serbia, 41-48. (In Serbian).]Search in Google Scholar
[Leimu, J., 2018 Pressures formation in the opening and closing nips of cylinder dryers, XXIII International Symposium in the Fields of Pulp, Paper, Packaging and Graphics, Zlatibor, Serbia, 125-132.]Search in Google Scholar
[Martikainen, J. K., Moisio, T. J. I., 2009. Investigation of the effect of welding parameters on weld quality of plasma arc keyhole welding of structural steels, Welding Journal, 72(7), 329-340.]Search in Google Scholar
[Sjöstrand, B., 2017. Dewatering aspects at the forming section of the paper machine - Rewetting and forming fabric structure, Licentiate Thesis, Faculty of Health, Science and Technology, Karlstad University Studies, Karlstad, Sweden]Search in Google Scholar
[Taban, E., Dhooge, A., Kaluc, E., 2009. Plasma Arc Welding of Modified 12%Cr Stainless Steel, Materials and Manufacturing Processes, 24, 649-656.10.1080/10426910902769152]Search in Google Scholar
[http://www.pulppapermill.com/water-removal-from-paper-fiber-webs/]Search in Google Scholar