Selection of the Optimal Paper-Forming Sieve Obtained by the Plasma Welding

Bajpai, P., 2018. Paper Manufacture - Wet End Operation, In: Biermann’s Handbook of Pulp and Paper, Vol. 2: Paper and Board Making, Elsevier Inc., Amsterdam, Netherlands, https://doi.org/10.1016/B978-0-12-814238-7.00005-2.10.1016/B978-0-12-814238-7.00005-2Search in Google Scholar

Bojic, N., Jugovic, Z., Dragicevic, S., Slavkovic, R., 2012. Comparative Study of the Tensile Stress of Diagonal Sieves Produced by Plasma Welding and Hard Soldering Process, Metalurgia International, 17(5), 25-29.Search in Google Scholar

Bojić, N., Nikolić, R., Manojlović, G., 2019. Conformity of finished forming sieves for paper industry, Production Engineering Archives, 24, 29-32.10.30657/pea.2019.24.07Search in Google Scholar

Botonjić, Š., 2017. Production of cellulose and paper, theory and practice, Metallurgical-Technological Faculty, University of Zenica, Bosnia and Herzegovina. (In Bosnian).Search in Google Scholar

Chu, D., Forbes, M., Backström, J., Gheorghe, C., Chu, S., 2011. Model Predictive Control and Optimization for Papermaking Processes, In: Advanced Model Predictive Control, Edited by Tao Zheng, IntechOpen Limited, London, UK.10.5772/18535Search in Google Scholar

Drummond, D. M. D., Rodrigues, M. T. M., Grossmann, I. E., Guirardello, R. 2010. Optimization of water removal in the press section of a paper machine, Brazilian Journal of Chemical Engineering, 27(02), 275-288.Search in Google Scholar

Duraković, H., Muftić, A., Husić, E., 2018. Influence of cellulose fiber on mechanical properties of the Sack Kraft paper, XXIII International Symposium in the Fields of Pulp, Paper, Packaging and Graphics, Zlatibor, Serbia, 41-48. (In Serbian).Search in Google Scholar

Leimu, J., 2018 Pressures formation in the opening and closing nips of cylinder dryers, XXIII International Symposium in the Fields of Pulp, Paper, Packaging and Graphics, Zlatibor, Serbia, 125-132.Search in Google Scholar

Martikainen, J. K., Moisio, T. J. I., 2009. Investigation of the effect of welding parameters on weld quality of plasma arc keyhole welding of structural steels, Welding Journal, 72(7), 329-340.Search in Google Scholar

Sjöstrand, B., 2017. Dewatering aspects at the forming section of the paper machine - Rewetting and forming fabric structure, Licentiate Thesis, Faculty of Health, Science and Technology, Karlstad University Studies, Karlstad, SwedenSearch in Google Scholar

Taban, E., Dhooge, A., Kaluc, E., 2009. Plasma Arc Welding of Modified 12%Cr Stainless Steel, Materials and Manufacturing Processes, 24, 649-656.10.1080/10426910902769152Search in Google Scholar

http://www.pulppapermill.com/water-removal-from-paper-fiber-webs/Search in Google Scholar