[
1. Siebert R, Schneider J, Beyer E. Laser cutting and mechanical cutting of electrical steels and its effect on the magnetic properties, Mag, IEEE Transs on. 2014; 50: 1–4. Available from: https://ieeexplore.ieee.org/document/679804510.1109/TMAG.2013.2285256
]Search in Google Scholar
[
2. Slota J, Kaščák L, Kut S. FEM Modeling of shear cutting of electrical steel sheets under various technological conditions. Acta Mech Slo2018; 22 (4): 24–30. Available from: https://www.actamechanica.sk/pdfs/ams/2018/04/04.pdf10.21496/ams.2018.031
]Search in Google Scholar
[
3. Ghadbeigi H, Al-Rubaye A, Robinson F.C.J, et al., Blanking induced damage in thin 3.2% silicon steel sheets. Prod Eng. 2020; 14: 53–64.10.1007/s11740-019-00931-1
]Search in Google Scholar
[
4. Weiss H. A, Leuning N, Steentjes S, et al., Influence of shear cutting parameters on the electromagnetic properties of non-oriented electrical steel sheets. Jl of Magn and Mag Mat 2017; 421: 250–259. Available from: https://www.sciencedirect.com/science/article/abs/pii/S030488531631294X10.1016/j.jmmm.2016.08.002
]Search in Google Scholar
[
5. Zhao Z, Song R, Wang Y, Wang Y, Hu Ch, Zhang Y. Slanted blades optimizing grain texture and work hardening of non-oriented electrical steel in stress coverages during shearing and blanking processes. Steel Res Int 2021; 92, 2100233, 1-7.10.1002/srin.202100233
]Search in Google Scholar
[
6. Paltanea G, Manescu V, Nemoianu I.V, Gavrila H, Andrei P.C. Influence of cutting technologies on the magnetic anisotropy of grain oriented electrical steel. In 2017 Electric Vehicles Int Conf, EV 2017, volume 2017-Janua, pages 1–4, 2017.10.1109/EV.2017.8242088
]Search in Google Scholar
[
7. Hofmann M, Naumoski H, Herr U, Herzog H.-G. Magnetic properties of electrical steel sheets in respect of cutting: Micromagnetic analysis and macromagnetic modeling. IEEE Trans on Mag2016; 52, 1–14. Available from: https://ieeexplore.ieee.org/document/728682310.1109/TMAG.2015.2484280
]Search in Google Scholar
[
8. Moses A.J. Energy efficient electrical steels: magnetic performance prediction and optimization. Scri Mat 2012; 67 (6), 560–565. Available from: https://www.sciencedirect.com/science/article/abs/pii/S135964621200129710.1016/j.scriptamat.2012.02.027
]Search in Google Scholar
[
9. Naumoski H, Riedmüller B, Minkow A. Herr U. Investigation of the influence of different cutting procedures on the global and local magnetic properties of non-oriented electrical steel. J of Magn and Mag Mat 2015; 392, 126–133. Available from: https://www.sciencedirect.com/science/article/abs/pii/S030488531530155410.1016/j.jmmm.2015.05.031
]Search in Google Scholar
[
10. Lewis N, Anderson P, Hall J, Gao Y. Power loss models in punched non-oriented electrical steel rings. IEEE Trans on Mag. 2016; 52(5), 1–4. Available from: https://ieeexplore.ieee.org/document/742892810.1109/TMAG.2016.2530304
]Search in Google Scholar
[
11. Kuo S.K, Lee W.C, Lin S.Y, Lu C.Y. The influence of cutting edge deformations on magnetic performance degradation of electrical steel. 2014 17th Int Conf on Electrl Mach and Systems (ICEMS), 2014; 3041-3046.10.1109/ICEMS.2014.7014017
]Search in Google Scholar
[
12. LoBue M. Sasso C. Basso V. Fiorillo F. Bertotti G. Power losses and magnetization process in Fe–Si non-oriented steels under tensile and compressive stress. J of Magn and Mag Mat 2000; 215–216, 124–126. Available from: https://www.sciencedirect.com/science/article/abs/pii/S030488530000092510.1016/S0304-8853(00)00092-5
]Search in Google Scholar
[
13. Boehm L, Hartmann C, Gilch I, Stoecker A, Kawalla R, Wei X, Hirt G, Heller M, Korte-Kerzel S, Leuning N, et al. Grain size influence on the magnetic property deterioration of blanked non-oriented electrical steels. Materials 2021, 14, 7055. Available from: https://www.mdpi.com/1996-1944/14/22/705510.3390/ma14227055861868534832456
]Search in Google Scholar
[
14. Wang X, Wang Z, Cui R, Li Sh. Influence of blanking process on the magnetic properties of non-oriented electrical steel lamination. J of Shanghai Jiao Tong University. 2019; 53(9), 1115-1121.
]Search in Google Scholar
[
15. Wang N, Golovashchenko S.F. Mechanism of fracture of aluminum blanks subjected to stretching along the sheared edge. J of Mat Proc Tech 2016; 233, 142–160. Available from:https://www.sciencedirect.com/science/article/abs/pii/S092401361630055310.1016/j.jmatprotec.2016.02.022
]Search in Google Scholar
[
16. Cao H, Hao L, Yi J, Zhang X, Luo Z, Chen Sh, et al., The influence of punching process on residual stress and magnetic domain structure of non-oriented silicon steel. Jof Magn and Mag Mat 2016; 406, 42–47. Available from: https://www.sciencedirect.com/science/article/abs/pii/S030488531530958610.1016/j.jmmm.2015.12.098
]Search in Google Scholar
[
17. Bayraktar Ş, Turgut Y. Effects of different cutting methods for electrical steel sheets on performance of induction motors. Procof the Institution of Mech Eng, Part B: J of Eng Man 2018; 232 (7), 1287–1294.10.1177/0954405416666899
]Search in Google Scholar
[
18. Dems M, Komeza K, Kubiak W, Szulakowski J. Impact of core sheet cutting method on parameters of induction motors. Energies. 2020; 13 (8), 1960. Available from: https://www.mdpi.com/1996-1073/13/8/1960
]Search in Google Scholar
[
19. Vandenbossche L, Jacobs S, Henrotte F, Hameyer K. Impact of cut edges in magnetization curves and iron losses in e-machines for automotive traction, in Proc of 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symp & Exhibition, EVS, (Schenzhen, China), November 2010.10.3390/wevj4030587
]Search in Google Scholar
[
20. Hirsch M, Demmel P, Golle R, Hoffmann H. Light metal in high-speed stamping tools, Key Eng Mat2001; 473, 259–266.10.4028/www.scientific.net/KEM.473.259
]Search in Google Scholar
[
21. Harstick H.M.S, Ritter M, Plath A, Riehemann W. EBSD Investigations on cutting edges of non-oriented electrical steel. Met, Micr and Analysis. 2014; 3 (4), 244–251.10.1007/s13632-014-0148-2
]Search in Google Scholar
[
22. Kałduński P, Kukiełka L. The numerical analysis of the influence of the blankholder force and the friction coefficient on the value of the drawing force, PAMM. 2007; 7 (1), 4010045-4010046. Available from:https://onlinelibrary.wiley.com/doi/pdf/10.1002/pamm.20070105910.1002/pamm.200701059
]Search in Google Scholar
[
23. Kukiełka L. Podstawy Badań Inżynierskich; Politechnika Koszalińska: Koszalin, Poland; PWN: Warszawa, Poland, 2002. (In Polish)
]Search in Google Scholar
[
24. Bohdal L. Application of a SPH coupled FEM method for simulation of trimming of aluminum autobody sheet. Acta Mech et Aut. 2016; 10(1), 56–61.10.1515/ama-2016-0010
]Search in Google Scholar
[
25. Chodor J, Kukielka L. Using nonlinear contact mechanics in process of tool edge movement on deformable body to analysis of cutting and sliding burnishing processes, App Mech and Mat 2014; 474, 339–344.10.4028/www.scientific.net/AMM.474.339
]Search in Google Scholar
[
26. Johnson G.R, Cook W.H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. 7th International Symposium on Ballistics, The Hague, The Netherlands. 1983; 541–548.
]Search in Google Scholar
[
27. Bohdal Ł. Teoretyczne i doświadczalne podstawy optymalizacji procesów cięcia mechanicznego stopów metali lekkich i stali elektrotechnicznych. Monografia Wydziału Mechanicznego nr 344, Wydawnictwo Uczelniane Politechniki Koszalińskiej, Koszalin. 2018. ISSN 0239-7129, ISBN 978-83-7365-7481-5 (In polish).
]Search in Google Scholar
[
28. Alatawneh A, Saleem A, Rahman T, Lowther D.A, Chromik R. Modelling and analysis of the effects of cutting of core laminations in electric machines, IET Electric Power Appl 2020; 14 (12), 2355–2361. Available from: https://ietresearch.onlinelibrary.wiley.com/doi/full/10.1049/iet-epa.2020.021810.1049/iet-epa.2020.0218
]Search in Google Scholar
[
29. Bratus V, Kosel F, Kovac M, Hidria. Determination of optimal cutting edge geometry on a stamped orthotropic circular electrical steel sheet, J of Mat Proc Tech 2005; 210 (2), 396-407. Available from: https://www.sciencedirect.com/science/article/abs/pii/S092401360900361610.1016/j.jmatprotec.2009.09.029
]Search in Google Scholar
[
30. Demir A, Ocak O, Ulu Y. Impact of lamination processing methods on performance of permanent magnet synchronous motors. In: Int conf on electr mach (ICEM), Berlin, 2–5 September 2014, 1218–1223.10.1109/ICELMACH.2014.6960337
]Search in Google Scholar
[
31. Hilditch T.B, Hodgson P.D. Development of the sheared edge in the trimming of steel and light metal sheet, Part 1 - Experimental observations. J of Mat Proc Tech. 2005; 169, 184–191. Available from: https://www.sciencedirect.com/science/article/abs/pii/S092401360500462010.1016/j.jmatprotec.2005.02.266
]Search in Google Scholar
[
32. Hilditch T.B, Hodgson P.D. Development of the sheared edge in the trimming of steel and light metal sheet, Part 2 - Mechanisms and modeling. J of Mat Proc Tech 2005; 169, 192–198. Available from: https://www.sciencedirect.com/science/article/abs/pii/S092401360500463210.1016/j.jmatprotec.2005.02.267
]Search in Google Scholar
[
33. Klimczyk PK, Anderson P, Moses A. Influence of cutting techniques on magnetostriction under stress of grain oriented electrical steel. IEEE Trans on Mag 2012; 48, 1417–1420. Available from: https://ieeexplore.ieee.org/document/617234110.1109/TMAG.2011.2174626
]Search in Google Scholar
[
34. Kukielka L. Nonlinear modeling for elasto/visco – plastic contact problem in technological processes, International Scientific IFNA – ANS Journal, Problems of non – linear Analysis in Engineering Systems (2) (2004) 39-53.
]Search in Google Scholar
[
35. Kurosaki Y, Mogi H, Fujii H. Importance of punching and workability in non-oriented electrical steel sheets. J of Magn and Mag Mat 2008; 320, 2474–2480. Available from: https://www.sciencedirect.com/science/article/abs/pii/S030488530800387910.1016/j.jmmm.2008.04.073
]Search in Google Scholar
[
36. Manescu V, Paltanea G, Gavrila H. Some important effects of the water jet and laser cutting methods on the magnetic properties of the non-oriented silicon iron sheets. In: 9th intsymp on adv topics in electr eng (ATEE), Bucharest, Romania, 7–9 May 2015, pp.7–9.10.1109/ATEE.2015.7133856
]Search in Google Scholar
[
37. Pulnikov A, Baudouin P, Melkebeek J. Induced stresses due to the mechanical cutting of non-oriented electrical steels. J of Magn and Mag Materials. 2003; 254–255, 355–357. Available from: https://www.sciencedirect.com/science/article/abs/pii/S030488530200853310.1016/S0304-8853(02)00853-3
]Search in Google Scholar