<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>A significant number of investigations have been reported on the elaboration and characterization of Polymer/Clays composites, via different methods. In our work, new composites materials were successfully prepared by in-situ polymerization of 4-vinylpyridine (4VP), in presence of two different types of Algerian modified clays (Maghnia and Mostaganem), noted (BC) and (MC), respectively. Different percentage clays (1 wt%, 3 wt% and 5 wt%) have been used. The differential scanning calorimetry analysis reveals the variation of glass transition temperature (Tg) of the copolymer in the composite materials. We show a decrease glass transition temperature (Tg) from 147°C to 131°C for P4VP-BC and from 147°C to 124°C for P4VP-MC according to the increase percentage of clays. Thermogravimetric analysis (TGA) shows good stability of composite materials at high temperature. Fourier Transformed Infrared (FTIR), Scanning Electron Microscopy coupled with Energy dispersive X-Ray Spectroscopy (SEM-EDX) and <sup>1</sup>H NMR spectroscopy are used to show the presence of the clays in the materials.</p>
</abstract>

A significant number of investigations have been reported on the elaboration and characterization of Polymer/Clays composites, via different methods. In our work, new composites materials were successfully prepared by in-situ polymerization of 4-vinylpyridine (4VP), in presence of two different types of Algerian modified clays (Maghnia and Mostaganem), noted (BC) and (MC), respectively. Different percentage clays (1 wt%, 3 wt% and 5 wt%) have been used. The differential scanning calorimetry analysis reveals the variation of glass transition temperature (Tg) of the copolymer in the composite materials. We show a decrease glass transition temperature (Tg) from 147°C to 131°C for P4VP-BC and from 147°C to 124°C for P4VP-MC according to the increase percentage of clays. Thermogravimetric analysis (TGA) shows good stability of composite materials at high temperature. Fourier Transformed Infrared (FTIR), Scanning Electron Microscopy coupled with Energy dispersive X-Ray Spectroscopy (SEM-EDX) and 1H NMR spectroscopy are used to show the presence of the clays in the materials.

Plasticizing Properties Improvement of Poly (4-Vinylpyridine)/Clay Composites: Effect of Composition and Clay Nature

Laboratoire de Catalyse et Synthèse en Chimie Organique (LCSCO) Department of Chemistry

Advances in Materials Science

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

A significant number of investigations have been reported on the elaboration and characterization of Polymer/Clays composites, via different methods. In our...

Plasticizing Properties Improvement of Poly (4-Vinylpyridine)/Clay Composites: Effect of Composition and Clay Nature

Publié en ligne: 05 oct. 2021

Pages: 5 - 16

DOI: https://doi.org/10.2478/adms-2021-0014

Mots clés
Composite, P4VP, clays, in-situ polymerization

© 2021 Fayçal Dergal et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Plasticizing Properties Improvement of Poly (4-Vinylpyridine)/Clay Composites: Effect of Composition and Clay Nature

Publié en ligne: 05 oct. 2021

Pages: 5 - 16

DOI: https://doi.org/10.2478/adms-2021-0014

Mots clésComposite, P4VP, clays, in-situ polymerization

© 2021 Fayçal Dergal et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
Composite, P4VP, clays, in-situ polymerization