Accès libre

Research of 316L Metallic Powder for Use in SLM 3D Printing

J. Hajnys

J. Hajnys

VSB - Technical University of Ostrava, Faculty of Mechanical EngineeringOstrava,
Recherchez cet auteur sur
Sciendo|Google Scholar
Hajnys, J.
, 
M. Pagac

M. Pagac

VSB - Technical University of Ostrava, Faculty of Mechanical EngineeringOstrava,
Recherchez cet auteur sur
Sciendo|Google Scholar
Pagac, M.
, 
J. Mesicek

J. Mesicek

VSB - Technical University of Ostrava, Faculty of Mechanical EngineeringOstrava,
Recherchez cet auteur sur
Sciendo|Google Scholar
Mesicek, J.
, 
J. Petru

J. Petru

VSB - Technical University of Ostrava, Faculty of Mechanical EngineeringOstrava,
Recherchez cet auteur sur
Sciendo|Google Scholar
Petru, J.
 et 
F. Spalek

F. Spalek

VSB - Technical University of Ostrava, Faculty of Mechanical EngineeringOstrava,
Recherchez cet auteur sur
Sciendo|Google Scholar
Spalek, F.
  
13 avr. 2020
Research of 316L Metallic Powder for Use in SLM 3D Printing's Cover Image
À propos de cet article
Article précédent
Article suivant
Citez
Télécharger la couverture
Publié en ligne: 13 avr. 2020
Pages: 5 - 15
DOI: https://doi.org/10.2478/adms-2020-0001
Mots clés
© 2020 J. Hajnys et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
Hajnys, J.
VSB - Technical University of Ostrava, Faculty of Mechanical EngineeringOstrava
Pagac, M.
VSB - Technical University of Ostrava, Faculty of Mechanical EngineeringOstrava
Mesicek, J.
VSB - Technical University of Ostrava, Faculty of Mechanical EngineeringOstrava
Petru, J.
VSB - Technical University of Ostrava, Faculty of Mechanical EngineeringOstrava
Spalek, F.
VSB - Technical University of Ostrava, Faculty of Mechanical EngineeringOstrava
Langue:
Anglais
Périodicité:
4 fois par an
Sujets de la revue:
Sciences des matériaux, Matériaux fonctionnels et intelligents
RSS Feed de la revue