<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The paper deals with the problem of surveying buildings in the RTN GNSS mode using modernized indirect methods of measurement. As a result of the classical realtime measurements using indirect methods (intersection of straight lines or a point on a straight line), we obtain a building structure (a building) which is largely deformed. This distortion is due to the inconsistency of the actual dimensions of the building (tie distances) relative to the obtained measurement results. In order to eliminate these discrepancies, and thus to ensure full consistency of the building geometric structure, an innovative solution was applied - the method of vector addition - to modify the linear values (tie distances) of the external face of the building walls. A separate research problem tackled in the article, although not yet fully solved, is the issue of coordinates of corners of a building obtained after the application of the method of vector addition.</p></abstract>

The paper deals with the problem of surveying buildings in the RTN GNSS mode using modernized indirect methods of measurement. As a result of the classical realtime measurements using indirect methods (intersection of straight lines or a point on a straight line), we obtain a building structure (a building) which is largely deformed. This distortion is due to the inconsistency of the actual dimensions of the building (tie distances) relative to the obtained measurement results. In order to eliminate these discrepancies, and thus to ensure full consistency of the building geometric structure, an innovative solution was applied - the method of vector addition - to modify the linear values (tie distances) of the external face of the building walls. A separate research problem tackled in the article, although not yet fully solved, is the issue of coordinates of corners of a building obtained after the application of the method of vector addition.

Routing Corners of Building Structures – by the Method of Vector Addition – Measured with RTN GNSS Surveying Technology

AGH University of Science and Technology, Faculty of Mining Surveying and Environmental Engineering, Department of Geomatics 30 Mickiewicza Al., 30-059 Krakow, Poland

Artificial Satellites

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The paper deals with the problem of surveying buildings in the RTN GNSS mode using modernized indirect methods of measurement. As a result of the classical...

Routing Corners of Building Structures – by the Method of Vector Addition – Measured with RTN GNSS Surveying Technology

Publié en ligne: 12 déc. 2015

Pages: 181 - 200

Reçu: 18 août 2015

Accepté: 09 nov. 2015

DOI: https://doi.org/10.1515/arsa-2015-0015

Mots clés
RTN and RTX GNSS, surveys of buildings, indirect methods of measurement, vector addition, measurement control network

© Artificial Satellites

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Routing Corners of Building Structures – by the Method of Vector Addition – Measured with RTN GNSS Surveying Technology

Publié en ligne: 12 déc. 2015

Pages: 181 - 200

Reçu: 18 août 2015

Accepté: 09 nov. 2015

DOI: https://doi.org/10.1515/arsa-2015-0015

Mots clésRTN and RTX GNSS, surveys of buildings, indirect methods of measurement, vector addition, measurement control network

© Artificial Satellites

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Mots clés
RTN and RTX GNSS, surveys of buildings, indirect methods of measurement, vector addition, measurement control network