<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The paper deals with the problem of surveying buildings in the RTN GNSS mode using modernized indirect methods of measurement. As a result of the classical realtime measurements using indirect methods (intersection of straight lines or a point on a straight line), we obtain a building structure (a building) which is largely deformed. This distortion is due to the inconsistency of the actual dimensions of the building (tie distances) relative to the obtained measurement results. In order to eliminate these discrepancies, and thus to ensure full consistency of the building geometric structure, an innovative solution was applied - the method of vector addition - to modify the linear values (tie distances) of the external face of the building walls. A separate research problem tackled in the article, although not yet fully solved, is the issue of coordinates of corners of a building obtained after the application of the method of vector addition.</p></abstract>

The paper deals with the problem of surveying buildings in the RTN GNSS mode using modernized indirect methods of measurement. As a result of the classical realtime measurements using indirect methods (intersection of straight lines or a point on a straight line), we obtain a building structure (a building) which is largely deformed. This distortion is due to the inconsistency of the actual dimensions of the building (tie distances) relative to the obtained measurement results. In order to eliminate these discrepancies, and thus to ensure full consistency of the building geometric structure, an innovative solution was applied - the method of vector addition - to modify the linear values (tie distances) of the external face of the building walls. A separate research problem tackled in the article, although not yet fully solved, is the issue of coordinates of corners of a building obtained after the application of the method of vector addition.

Routing Corners of Building Structures – by the Method of Vector Addition – Measured with RTN GNSS Surveying Technology

AGH University of Science and Technology, Faculty of Mining Surveying and Environmental Engineering, Department of Geomatics 30 Mickiewicza Al., 30-059 Krakow, Poland

Artificial Satellites

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

The paper deals with the problem of surveying buildings in the RTN GNSS mode using modernized indirect methods of measurement. As a result of the classical...

Routing Corners of Building Structures – by the Method of Vector Addition – Measured with RTN GNSS Surveying Technology

Published Online: Dec 12, 2015

Page range: 181 - 200

Received: Aug 18, 2015

Accepted: Nov 09, 2015

DOI: https://doi.org/10.1515/arsa-2015-0015

Keywords
RTN and RTX GNSS, surveys of buildings, indirect methods of measurement, vector addition, measurement control network

© Artificial Satellites

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Routing Corners of Building Structures – by the Method of Vector Addition – Measured with RTN GNSS Surveying Technology

Published Online: Dec 12, 2015

Page range: 181 - 200

Received: Aug 18, 2015

Accepted: Nov 09, 2015

DOI: https://doi.org/10.1515/arsa-2015-0015

KeywordsRTN and RTX GNSS, surveys of buildings, indirect methods of measurement, vector addition, measurement control network

© Artificial Satellites

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Keywords
RTN and RTX GNSS, surveys of buildings, indirect methods of measurement, vector addition, measurement control network