[1. Shalaby S.W., Salz U.: Polymers for dental and orthopedic applications. CRC Press, Boca Raton 2007.10.1201/9781420003376]Search in Google Scholar
[2. Rodrigues Junior S.A., Ferracane J.L., Bona A.D.: Flexural strength and Weibull analysis of a microhybrid and a nanofill composite evaluated by 3- and 4-point bending tests. Dental Materials 24 (2008), 426-431.]Search in Google Scholar
[3. Bechtold J., dos Santos P.J., Anido-Anido A., di Hipolito V., Alonso R.C.B., D’Alpino P.H.P.: Hardness, polymerization depth, and internal adaptation of Class II silorane composite restorations as a function of polymerization protocol. European Journal of Densitry 6 (2012), 133-140.]Search in Google Scholar
[4. Walczak A., Pieniak D., Niewczas A., Niewczas A.M., Kordos P.: Study of ceramic-polymer composites reliability based on the bending strength test. Journal of KONBiN, 35 (2015), 169-178.]Search in Google Scholar
[5. Pieniak D., Niewczas A.M.: Phenomenological evaluation of fatigue cracking of dental restorations under conditions of cyclic mechanical loads. Acta of Bioengineering and Biomechanics 14 (2012), 9-17.]Search in Google Scholar
[6. Ivanisevic A., Lainovic T., Blazic L., Vilotic M.: Influence of light-curing mode on the mechanical properties of dental resin nanocomposites. 24th DAAAM International Symposium on Intelligence Manufacturing and Automation, 2013, Procedia Engineering 69 (2014), 921-930.10.1016/j.proeng.2014.03.071]Search in Google Scholar
[7. Eftekhari M, Fatemi A.: On the strengthening effect of increasing cycling frequency on fatigue behavior of some polymers and their composites: Experiments and modeling. International Journal of Fatigue 87 (2016), 153–166.]Search in Google Scholar
[8. Musanje L., Darvell B.: Effects of strain rate and temperature on the mechanical properties of resin composites. Dental Materials 20 (2004), 750–765.]Search in Google Scholar
[9. Stewardson D.A., Shortall A.C., Marquis P.M.: The effect of clinically relevant thermocycling on the flexural properties of endodontic post materials. Journal of Dentistry 38 (2010), 437–442.]Search in Google Scholar
[10. Leibrock H., Degenhart M., Behr M., Rosentritt M., Handel G.: In vitro study on the effect of thermo- and load-cycling on the bond strength of porcelain repair systems. Journal of Oral Rehabilitation 26 (1999), 130–7.]Search in Google Scholar
[11. Arsecularatne J.A., Chung N.R.: An in vitro study of the wear behaviour of dental composites. Biosurface nad Biotribology, 3 (2016), 102-113.]Search in Google Scholar
[12. Niewczas A., Pieniak D., Bachanek T., Surowska B., Bieniaś J., Pałka K.: Prognosing of functional degradation of bio-mechanical systems exemplified by the tooth-composite filling system, Eksploatacja i Niezawodnosc – Maintenance and Reliability 1 (2010), 23-34.]Search in Google Scholar
[13. Kordos P., Hunicz J., Niewczas A.: The station designed for accelerated fatigue tests of dental materials. Maintenance and Reliability 1 (2009), 63-69.]Search in Google Scholar
[14. Pieniak D., Niewczas A., Kordos P.: Influence of thermal fatigue and ageing on the microhardness of polymer-ceramic composites for bio-medical applications. Eksploatacja i Niezawodnosc – Maintenance and Reliability 2 (2012), 181–188.]Search in Google Scholar
[15. Ferracane J.L., Palin W.M.: Effects of particulate filler systems on the properties and performance of dental polymer composites. In Vallittu P. editor, Non - Metallic Biomaterials for Tooth Repair and Replacement, Woodhead Publishing, Cambridge 2012.10.1533/9780857096432.3.294]Search in Google Scholar
[16. Lohbauer U., Belli R., Ferracane J.L.: Factors involved in mechanical fatigue degradation of dental resin composites. Journal of Dental Research 92 (2013), 584-91.]Search in Google Scholar
[17. Randolph L.D., Palin W.M., Gaetane L., Leprince J.G.: Filler characteristics of modern dental resin composites and their influence on physico-mechanical properties. Dental Materials 32 (2016), 1586–1599.]Search in Google Scholar
[18. Hambire U.V., Tripathi V.K.: Optimization of compressive strength of zirconia based dental composites. Bulletin of Materials Science 37 (2014), 1315-1320.]Search in Google Scholar
[19. Hosseinalipour M., Javadpour J., Rezaie H., Dadras T., Hayati A.N.: Investigation of mechanical properties of experimental Bis-GMA/TEGDMA dental composite resins containing various mass fractions of silica nanoparticles. Journal of Prosthodontics 19 (2010), 112-117.]Search in Google Scholar
[20. Tanimoto Y., Hirayama S., Yamaguchi M., Nishiwaki T.: Static and dynamic moduli of posterior dental resin composites under compressive loading. Journal of the Mechanical Behavior of Biomedical Materials 7 (2011), 1531-1539.]Search in Google Scholar
[21. Beun S., Glorieux T., Devaux J., Vreven J., Leloup G.: Characterization of nanofilled compared to universal and microfilled composites. Dental Materials 23 (2007), 51-59.]Search in Google Scholar
[22. Antunes P.V., Ramalho A., Carrilho E.V.P.: Mechanical and wear behaviours of nano and microfilled polymeric composite: effect of filler fraction and size. Materials & Design 61 (2014), 50–60.]Search in Google Scholar
[23. Hahnel S., Dowling A.H., El-Safty S., Fleming G.J.: The influence of monomeric resin and filler characteristic on the performance of experimental resin-based composites (RBCs) derived from a commercial formulation. Dental Materials 28 (2012), 416-423.]Search in Google Scholar
[24. Drummond J.L.: Degradation, fatigue and failure of resin dental composite materials. Journal of Dental Research, 87 (2008), 710-719.]Search in Google Scholar
[25. Souza, R. O., Ozcan M., Michida S.M., de Melo R. M., Pavanelli C. A., Bottino M. A., Soares L. E., Martin A. A.: Conversion degree of indirect resin composites and effect of thermocycling o their physical properties. Journal of Prosthodontics 19 (2010), 218-225.]Search in Google Scholar
[26. Kawakami Y., Takeshige F., Hayashi M., Ebisu S.: Fatigue of tooth-colored restoratives in aqueous environment. Dental Materials Journal 26 (2007), 1-6.]Search in Google Scholar
[27. Janda R., Roulet J.F., Latta M., Ruttermann S.: Water sorption and solubility of contemporary resin-based filling materials. Journal of Biomedical Materials Research Part B: Applied Biomaterials 82 (2007), 545-551.10.1002/jbm.b.3076017285606]Search in Google Scholar
[28. Ferracane JL: Hygroscopic and hydrolytic effects in dental polymer networks. Dental Materials 22 (2006), 211-222.10.1016/j.dental.2005.05.00516087225]Search in Google Scholar
[29. Finer Y., Santerre J.P.: The influence of resin chemistry on a dental composite’s biodegradation. Journal of Biomedical Materials Research: Part A 69 (2004), 233-246.]Search in Google Scholar
[30. Yu B., Liu D., Liu F., He J.: Preparation and characterization of light-cured dental resin without methacrylate monomers derived from Bisphenol A. Advances in Polymer Technology 33 (2014), 21417.10.1002/adv.21417]Search in Google Scholar
