<abstract xmlns="http://www.w3.org/1999/xhtml">This study investigates the effect of different activating flux such as V2O5, TiO2, MoO3, Cr2O3, and Al2O3 on A-TIG welding process of Incoloy 800H. The influence of the flux on the depth of penetration and on mechanical and metallurgical characteristics of the weld were studied and compared with autogeneous TIG welds which were welded with the same process parameters and conditions. The use of TiO2 flux gave full depth of penetration and the use of V2O5, Cr2O3 flux gave increased penetration as compared to autogeneous TIG welds while the use of Al2O3 and MoO3 led to the detoriation of the effect.</abstract>

This study investigates the effect of different activating flux such as V2O5, TiO2, MoO3, Cr2O3, and Al2O3 on A-TIG welding process of Incoloy 800H. The influence of the flux on the depth of penetration and on mechanical and metallurgical characteristics of the weld were studied and compared with autogeneous TIG welds which were welded with the same process parameters and conditions. The use of TiO2 flux gave full depth of penetration and the use of V2O5, Cr2O3 flux gave increased penetration as compared to autogeneous TIG welds while the use of Al2O3 and MoO3 led to the detoriation of the effect.

A Study on the Effect of Different Activating Flux on A-TIG Welding Process of Incoloy 800H

Department of Production Engineering, National Institute of Technology. Tiruchirappalli-620015, Tamilnadu,

School of mechanical engineering, SASTRA University, Thanjavur-613401, Tamilnadu,

Advances in Materials Science

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

This study investigates the effect of different activating flux such as V2O5, TiO2, MoO3, Cr2O3, and Al2O3 on A-TIG welding process of Incoloy 800H. The...

A Study on the Effect of Different Activating Flux on A-TIG Welding Process of Incoloy 800H

Publié en ligne: 18 oct. 2016

Pages: 26 - 37

DOI: https://doi.org/10.1515/adms-2016-0014

Mots clés
A-TIG, Incoloy 800H, Activating Flux, Carbide, Corrosion

© 2016 S.P. Sridhar et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

A Study on the Effect of Different Activating Flux on A-TIG Welding Process of Incoloy 800H

Publié en ligne: 18 oct. 2016

Pages: 26 - 37

DOI: https://doi.org/10.1515/adms-2016-0014

Mots clésA-TIG, Incoloy 800H, Activating Flux, Carbide, Corrosion

© 2016 S.P. Sridhar et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
A-TIG, Incoloy 800H, Activating Flux, Carbide, Corrosion