
14 Artículos
Triple-layer remote phosphor structure: A potential packaging configuration to enhance both color quality and lumen efficiency of 6,000–8,500 K WLEDs
, , y
Effect of addition of non-functionalized graphene oxide in a commercial epoxy resin used as coating
, , , , , y
Confinement effectiveness of CFRP strengthened ultra-high performance concrete cylinders exposed to elevated temperatures
y
Experimental and theoretical behavior of cementitious plates containing ethylene vinyl acetate reinforced with glass woven fabric under impact load
y
The influence of MXenes on the mechanical, antistatic, and heat-resistant properties of CF/PI composites
Multiobjective optimization of fluphenazine nanocomposite formulation using NSGA-II method
, y
Influence of spray distance on mechanical and tribological properties of HVOF sprayed WC-Co-Cr coatings
, , , y
Optimisation of fragrance finishing on cotton by grafting of β -cyclodextrin based microcapsules: Application of the experimental design methodology
, , , y
Delayed setting time for alkali-activated slag composites using activator containing SiO2 and Na2O
, , y
Effect of sea sand and recycled aggregate replacement on fly ash/slag-based geopolymer concrete
, , , , y
Al2O3-TiO2 coatings deposition by intermixed and double injection SPS concepts
, , , y
Decomposition mechanisms of continuously cooled bainitic rail in the critical heat-affected zone of a flash-butt welded joints
, , , y
Physico-mechanical properties, structure, and phase composition of (BeO + TiO2)-ceramics containing TiO2 nanoparticles (0.1–2.0 wt.%)
, , , , y