Durability of Different UHPFRCs, Made from Pozzolan as a Substitute for Portland Cement and Immersed in Two Aggressive Environments of Hydrochloric and Sulfuric Acids

[1] Rakotoelson, T. H. & Ramaroson, M. (2017). Composite based on pouzzolane and wood sawdust. American Journal of Innovative Research and Applied Sciences. 5 (6), 454-461. Search in Google Scholar

[2] Neville, AM. (2000). Propriétés des bétons. Paris: Edition Eyrolles. Search in Google Scholar

[3] Ait Medjber, F. & Saidi, M. (2021). Durabilité des bétons fibrés à ultra hautes performances élaborés à base de matières premières locales, dans deux milieux agressifs d’acide chlorhydrique et de sulfates de barium. Romanian Journal of Civil Engineering. 12(1), 33-44. Search in Google Scholar

[4] Laoufi, L., Senhadji, Y., Benazzouk, A., Langlet, T., Mouli, M. & Laoufi, I. (2016). Durability of Natural Pozzolan-based mortar exposed to sulfate attack. Journal of Fundamental and Applied Sciences. 8(2), 268-279.10.4314/jfas.v8i2.7 Search in Google Scholar

[5] Laoufi, L., Senhadji, Y., Benazzouk, A., Langlet, T., Mouli, M., Laoufi, I., & Benosman, A. S. (2016). Assessment of pozzolanic mortars sustainability exposed to chemical attack. Journal of Materials and Environmental Science. 7 (5), 1835-1845. Search in Google Scholar

[6] NF EN 197-1. (2012). Ciment - Partie 1 : composition, spécifications et critères de conformité des ciments courants. Search in Google Scholar

[7] NF EN 934-2-A2. (2006). Adjuvants pour béton, mortier et coulis-Partie 2: Adjuvants pour béton - Définitions, exigences, conformité, marquage et étiquetage. Search in Google Scholar

[8] NF EN 196-1. (2016). Méthodes d’essais des ciments-Partie1: Détermination des résistances. Search in Google Scholar

[9] ASTM C348-08. (2008). Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars. Search in Google Scholar

[10] ASTM C349. (2018). Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure). Search in Google Scholar

[11] Zeghad, M., Mitterpach, J., Safi, B., Amrane, B. & Saidi, M. (2017). Reuse of refractory brick wastes (RBW) as a Supplementary cementitious material in a concrete. Periodica Polytechnica Civil Engineering. 61(1), 81-87.10.3311/PPci.8194 Search in Google Scholar

[12] Yu, R., Tang, P., Spiesz, P., & Brouwers, H. J.H. (2014). A study of multiple effects of nano-silica and hybrid fibres on the properties of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) incorporating waste bottom ash (WBA). Construction and Building Materials. 60, 98-110.10.1016/j.conbuildmat.2014.02.059 Search in Google Scholar

[13] Arel, H. S. (2016). Effects of curing type, silica fume fineness, and fiber length on the mechanical properties and impact resistance of UHPFRC. Results in Physics. 6, 664-674.10.1016/j.rinp.2016.09.016 Search in Google Scholar

[14] Yi, N. H., Kim, J. H. J., Han, T.S., Cho, Y.G. & Lee, J.H. (2012). Blast-resistant characteristics of ultrahigh strength concrete and reactive powder concrete. Construction and Building Materials. 28 (1), 694-707.10.1016/j.conbuildmat.2011.09.014 Search in Google Scholar

[15] Richard, P. (1996). Reactive Powder Concrete: A New-Ultra High Strength Cementitious Material. Proceedings of the Fourth International Symposium on the Utilization of High-Strength/High- Performance Concrete, 29-31 May (1343-1350). Paris: Edition de Larrard, F. & Lacroix, R. Search in Google Scholar

[16] ASTM C267-01. (2012). Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes. Search in Google Scholar

[17] Zivica, V., Bajza, A. (2001). Acidic attack of cement based materials- a review. Part1: Principle of acidic attack. Construction and Building Materials. 15(8), 331-340.10.1016/S0950-0618(01)00012-5 Search in Google Scholar

[18] Zivica, V., Bajza, A. (2002). Acidic attack of cement based materials- a review. Part2: Factors of rate of acidic attack and protective measures. Construction and Building Materials. 16(4), 215-222.10.1016/S0950-0618(02)00011-9 Search in Google Scholar

[19] Gabrysiak, F., (2013). Les Bétons. Matériaux (1-28). Search in Google Scholar

• Seismic Response of Concrete Gravity Dams Considering Hydrodynamic Effects
• Experimental Research on the Thermal Instability of Fiber Polypropylene Concrete at 250 °C
• SSP-JCE Volume 17
• Coconut Oil as Bio-based PCM: Characteristics and Compatibility with Plastics
• On the Practical Use of Advanced Constitutive Laws in Finite Element Underground Structures Analysis
• Effectiveness Assessment of Superplasticizer Admixtures: Case of Self-compacting Concrete Reinforced with Fine Mineral Fillers
• Assessment of Water Loss in the Water Distribution Network of Bendjerrah Using a Combination Approach of Fixed Area Variable Area Discharge, Minimum Night Flow, and Epanet Calibrator
• Physical-mechanical Evaluation of Polyethylene Terephthalate Fiber Dune Sand Mortar Exposed to Elevated Temperature
• Experimental Measurements of Drag and Lift Coefficient on Building with an Elliptical Cross-section
• Mechanical Properties of Self-compacting Concrete Containing Fine Aggregates from Cement Kiln Dust and Hardened Cement Waste
• Overheating in the Attic Space Classroom in Summer
• Thermal Study of Traditional Gypsum Plaster Brick Prototypes: The Case of Ouargla
• Prediction of Deflection Behavior of NSM Strengthened Reinforced Concrete Beam Using Fuzzy Logic
• Optimization of the Combined Effect of Lime and Ground Granulated Blast-furnace Slag on Clayey Soil
• Identification of Soil Mechanical Parameters by Inverse Analysis Using Stochastic Methods
• Assessing Photopic and Melanopic Daylighting Performance of Special Glazing System: A Full-scale Experiments
• Deformation Properties of Stone Columns Back-calculated from Static Load Tests
• Durability of Different UHPFRCs, Made from Pozzolan as a Substitute for Portland Cement and Immersed in Two Aggressive Environments of Hydrochloric and Sulfuric Acids
• Theoretical Analysis on Reinforced Concrete Bridge from Non-linear Temperature Effect
• Explicit Modeling of the Cyclic Behavior under a Large Number of Cycles: Application to the Case of Sand