A Novel Method for Optimizing Parameters influencing the Bearing Capacity of Geosynthetic Reinforced Sand Using RSM, ANN, and Multi-objective Genetic Algorithm
This work is licensed under the Creative Commons Attribution 4.0 International License.
P. K. Kolay, S. Kumar, and D. Tiwari (2013). Improvement of Bearing Capacity of Shallow Foundation on Geogrid Reinforced Silty Clay and Sand. Journal of Construction Engineering Volume 2013, Article ID 293809, 10 pages. http://dx.doi.org/10.1155/2013/293809.KolayP. K.KumarS.TiwariD.2013Improvement of Bearing Capacity of Shallow Foundation on Geogrid Reinforced Silty Clay and SandJournal of Construction Engineering2013Article ID 293809, 10 pages. http://dx.doi.org/10.1155/2013/293809.Search in Google Scholar
Abu El-Soud, S., Belal, A.M (2018). Bearing capacity of rigid shallow footing on geogrid-reinforced fine sand—experimental modeling. Arab J Geosci11, 247 (2018). https://doi.org/10.1007/s12517-018-3597-0.Abu El-SoudS.BelalA.M2018Bearing capacity of rigid shallow footing on geogrid-reinforced fine sand—experimental modelingArab J Geosci112472018https://doi.org/10.1007/s12517-018-3597-0.Search in Google Scholar
J. Binquet and K. L. Lee, (1975). “Bearing capacity tests on reinforced earth slabs,” Journal of Geotechnical Engineering Division, vol. 101, no. 12, pp. 1241–1255, 1975.BinquetJ.LeeK. L.1975“Bearing capacity tests on reinforced earth slabs,”Journal of Geotechnical Engineering Division10112124112551975Search in Google Scholar
J. Binquet and K. L. Lee, (1975). “Bearing capacity analysis of reinforced earth slabs,” Journal of Geotechnical Engineering Division, vol. 101, no. 12, pp. 1257–1276, 1975.BinquetJ.LeeK. L.1975“Bearing capacity analysis of reinforced earth slabs,”Journal of Geotechnical Engineering Division10112125712761975Search in Google Scholar
V. A. Guido, D. K. Chang, and M. A. Sweeney, (1986). “Comparison of geogrid and geotextile reinforced earth slabs,” Canadian Geotechnical Journal, vol. 23, no. 4, pp. 435–440, 1986.GuidoV. A.ChangD. K.SweeneyM. A.1986“Comparison of geogrid and geotextile reinforced earth slabs,”Canadian Geotechnical Journal2344354401986Search in Google Scholar
J. P. Sakti and B. M. Das, (1987). “Model tests for strip foundation on clay reinforced with geotextile layers,” Transportation Research Record, no. 1153, pp. 40–45, 1987.SaktiJ. P.DasB. M.1987“Model tests for strip foundation on clay reinforced with geotextile layers,”Transportation Research Record115340451987Search in Google Scholar
P. K. Basudhar, S. Saha, and K. Deb, (2007). “Circular footings resting on geotextile-reinforced sand bed,” Geotextiles and Geomembranes, vol. 25, no. 6, pp. 377–384, 2007.BasudharP. K.SahaS.DebK.2007“Circular footings resting on geotextile-reinforced sand bed,”Geotextiles and Geomembranes2563773842007Search in Google Scholar
G. W. E. Milligan, R. J. Fannin, and D. M. Farrar, (1986). “Model and full-scale tests on granular layers reinforced with a geogrid,” in Proceedings of the 3rd International Conference on Geotextiles, vol. 1, pp. 61–66, Vienna, Austria, 1986.MilliganG. W. E.FanninR. J.FarrarD. M.1986“Model and full-scale tests on granular layers reinforced with a geogrid,”inProceedings of the 3rd International Conference on Geotextiles16166Vienna, Austria1986Search in Google Scholar
K. H. Khing, B. M. Das, V. K. Puri, S. C. Yen, and E. E. Cook, (1994). “Foundation on strong sand underlain by weak clay with geogrid at the interface,” Geotextiles and Geomembranes, vol. 13, no. 3, pp. 199–206, 1994.KhingK. H.DasB. M.PuriV. K.YenS. C.CookE. E.1994“Foundation on strong sand underlain by weak clay with geogrid at the interface,”Geotextiles and Geomembranes1331992061994Search in Google Scholar
B. M. Das, K. H. Khing, and E. C. Shin, (1998). “Stabilization of weak clay with strong sand and geogrid at sand-clay interface,” Transportation Research Record, no. 1611, pp. 55–62, 1998.DasB. M.KhingK. H.ShinE. C.1998“Stabilization of weak clay with strong sand and geogrid at sand-clay interface,”Transportation Research Record161155621998Search in Google Scholar
E. C. Shin, B. M. Das, V. K. Puri, S. C. Yen, and E. E. Cook, (1993). “Bearing capacity of strip foundation on geogrid-reinforced clay,” Geotechnical Testing Journal, vol. 17, no. 4, pp. 535–541, 1993.ShinE. C.DasB. M.PuriV. K.YenS. C.CookE. E.1993“Bearing capacity of strip foundation on geogrid-reinforced clay,”Geotechnical Testing Journal1745355411993Search in Google Scholar
C. R. Patra, B. M. Das, and C. Atalar, 2005). “Bearing capacity of embedded strip foundation on geogrid-reinforced sand,” Geotextiles and Geomembranes, vol. 23, no. 5, pp. 454–462, 2005.PatraC. R.DasB. M.AtalarC.2005“Bearing capacity of embedded strip foundation on geogrid-reinforced sand,”Geotextiles and Geomembranes2354544622005Search in Google Scholar
B. R. Phanikumar, R. Prasad, and A. Singh, 2009). “Compressive load response of geogrid-reinforced fine, medium and coarse sands,” Geotextiles and Geomembranes, vol. 27, no. 3, pp. 183–186, 2009.PhanikumarB. R.PrasadR.SinghA.2009“Compressive load response of geogrid-reinforced fine, medium and coarse sands,”Geotextiles and Geomembranes2731831862009Search in Google Scholar
Y. L. Dong, J. Han, and X.-H. Bai, (2010). “Bearing capacities of geogridreinforced sand bases under static loading,” in Proceedings of GeoShanghai International Conference: Ground Improvement and Geosynthetics, pp. 275–281, June 2010.DongY. L.HanJ.BaiX.-H.2010“Bearing capacities of geogridreinforced sand bases under static loading,”inProceedings of GeoShanghai International Conference: Ground Improvement and Geosynthetics275281June 2010Search in Google Scholar
R. J. Fragaszy and E. Lawton, (1984). “Bearing capacity of reinforced sand subgrades,” Journal of Geotechnical Engineering, vol. 110, no. 10, pp. 1500–1507, 1984.FragaszyR. J.LawtonE.1984“Bearing capacity of reinforced sand subgrades,”Journal of Geotechnical Engineering11010150015071984Search in Google Scholar
C.-C. Huang and F. Tatsuoka, (1990). “Bearing capacity of reinforced horizontal sandy ground,” Geotextiles and Geomembranes, vol. 9, no. 1, pp. 51–82, 1990.HuangC.-C.TatsuokaF.1990“Bearing capacity of reinforced horizontal sandy ground,”Geotextiles and Geomembranes9151821990Search in Google Scholar
J. O. Akinmusuru and J. A. Akinbolade, (1981). “Stability of loaded footings on reinforced soil,” Journal of the Geotechnical Engineering Division, vol. 107, no. 6, pp. 819–827, 1981.AkinmusuruJ. O.AkinboladeJ. A.1981“Stability of loaded footings on reinforced soil,”Journal of the Geotechnical Engineering Division10768198271981Search in Google Scholar
T. Yetimoglu, M. Inanir, and O. E. Inanir, (2005). “A study on bearing capacity of randomly distributed fiber-reinforced sand fills overlying soft clay,” Geotextiles and Geomembranes, vol. 23, no. 2, pp. 174–183, 2005.YetimogluT.InanirM.InanirO. E.2005“A study on bearing capacity of randomly distributed fiber-reinforced sand fills overlying soft clay,”Geotextiles and Geomembranes2321741832005Search in Google Scholar
S. K. Dash, N. R. Krishnaswamy, and K. Rajagopal, (2001). “Bearing capacity of strip footings supported on geocell-reinforced sand,” Geotextiles and Geomembranes, vol. 19, no. 4, pp. 235–256, 2001.DashS. K.KrishnaswamyN. R.RajagopalK.2001“Bearing capacity of strip footings supported on geocell-reinforced sand,”Geotextiles and Geomembranes1942352562001Search in Google Scholar
S. K. Dash, S. Sireesh, and T. G. Sitharam, (2003). “Behaviour of geocell-reinforced sand beds under circular footing,” Ground Improvement, vol. 7, no. 3, pp. 111–115, 2003.DashS. K.SireeshS.SitharamT. G.2003“Behaviour of geocell-reinforced sand beds under circular footing,”Ground Improvement731111152003Search in Google Scholar
Raja, M.N.A., Shukla, S.K., 2020b. Ultimate bearing capacity of strip footing resting on soil bed strengthened by wraparound geosynthetic reinforcement technique. Geotext. Geomembranes 48 (6), 867e874, https://doi.org/10.1016/j.geotexmem.2020.06.005.RajaM.N.A.ShuklaS.K.2020bUltimate bearing capacity of strip footing resting on soil bed strengthened by wraparound geosynthetic reinforcement techniqueGeotext. Geomembranes486867e874https://doi.org/10.1016/j.geotexmem.2020.06.005.Search in Google Scholar
Raja MNA, Shukla SK, Experimental study on repeatedly loaded foundation soil strengthened by wraparound geosynthetic reinforcement technique, Journal of Rock Mechanics and Geotechnical Engineering, https://doi.org/10.1016/j.jrmge.2021.02.001RajaMNAShuklaSKExperimental study on repeatedly loaded foundation soil strengthened by wraparound geosynthetic reinforcement techniqueJournal of Rock Mechanics and Geotechnical Engineeringhttps://doi.org/10.1016/j.jrmge.2021.02.001Search in Google Scholar
Fragaszy RJ, Lawton E (1984). Bearing capacity of reinforced sand subgrades. J Geotech Eng 110(10):1500–1507.FragaszyRJLawtonE1984Bearing capacity of reinforced sand subgradesJ Geotech Eng1101015001507Search in Google Scholar
Yetimoglu T, Wu JT, Saglamer A (1994). Bearing capacity of rectangular footings on geogrid–reinforced sand. J Geotech Eng 120(12):2083–2099.YetimogluTWuJTSaglamerA1994Bearing capacity of rectangular footings on geogrid–reinforced sandJ Geotech Eng1201220832099Search in Google Scholar
Akinmusuru JO, Akinbolade JA (1981). Stability of loaded footings on reinforced soil. J Geotech Geoenvironmental Eng 107(ASCE 16320 Proceeding).AkinmusuruJOAkinboladeJA1981Stability of loaded footings on reinforced soilJ Geotech Geoenvironmental Eng107ASCE 16320 ProceedingSearch in Google Scholar
R.H. Myers, D.C. Montgomery, C.M. Anderson-Cook, (2016). Response surface methodology: process and product optimization using designed experiments, Wiley, New York. (2016).MyersR.H.MontgomeryD.C.Anderson-CookC.M.2016Response surface methodology: process and product optimization using designed experimentsWileyNew York2016Search in Google Scholar
Sasmal, S. K., and R. N. Behera.(2018). “Prediction of Combined Static and Cyclic Load Induced Settlement of Shallow Strip Footing on Granular Soil Using Artificial Neural Network.” International Journal of Geotechnical Engineering 1–11. doi:10.1080/19386362.2018.1557384.SasmalS. K.BeheraR. N.2018“Prediction of Combined Static and Cyclic Load Induced Settlement of Shallow Strip Footing on Granular Soil Using Artificial Neural Network.”International Journal of Geotechnical Engineering11110.1080/19386362.2018.1557384Open DOISearch in Google Scholar
Hamrouni A., Sbartai B., Dias D. (2021). “Ultimate dynamic bearing capacity of shallow strip foundations - Reliability analysis using the response surface methodology”. Soil Dynamics and Earthquake Engineering 144; 106690.HamrouniA.SbartaiB.DiasD.2021“Ultimate dynamic bearing capacity of shallow strip foundations - Reliability analysis using the response surface methodology”Soil Dynamics and Earthquake Engineering144106690Search in Google Scholar
Hamrouni A, Dias D, Sbartai B. (2020). Soil spatial variability impact on the behaviour of a reinforced earth wall. Front Struct Civ Eng 2020:v15.HamrouniADiasDSbartaiB2020Soil spatial variability impact on the behaviour of a reinforced earth wallFront Struct Civ Eng2020v15Search in Google Scholar
Marandi, S.M., Anvar, M., and Bahrami, M., (2016). Uncertainty analysis of safety factor of embankment built on stone column improved soft soil using fuzzy logic α-cut technique. Computers and Geotechnics, 75, 135–144. doi:10.1016/j.compgeo.2016.01.014.MarandiS.M.AnvarM.BahramiM.2016Uncertainty analysis of safety factor of embankment built on stone column improved soft soil using fuzzy logic α-cut techniqueComputers and Geotechnics7513514410.1016/j.compgeo.2016.01.014Open DOISearch in Google Scholar
Lafifi B, Rouaiguia A, Boumazza N (2019). Optimization of geotechnical parameters using Taguchi's design of experiment (DOE), RSM and desirability function. Innov Infrastruct Solut 4(1):1–12.LafifiBRouaiguiaABoumazzaN2019Optimization of geotechnical parameters using Taguchi's design of experiment (DOE), RSM and desirability functionInnov Infrastruct Solut41112Search in Google Scholar
Chana Phutthananon, Pornkasem Jongpradist & Pitthaya Jamsawang (2019): Influence of cap size and strength on settlements of TDM-piled embankments over soft ground, Marine Georesources & Geotechnology, DOI: 10.1080/1064119X.2019.1613700.PhutthananonChanaJongpradistPornkasemJamsawangPitthaya2019Influence of cap size and strength on settlements of TDM-piled embankments over soft groundMarine Georesources & Geotechnology10.1080/1064119X.2019.1613700Open DOISearch in Google Scholar
Zhan J, Deng A, Jaksa M (2021). Optimizing micaceous soil stabilization using response surface method. J Rock Mech Geotech Eng 13(1): 212–220.ZhanJDengAJaksaM2021Optimizing micaceous soil stabilization using response surface methodJ Rock Mech Geotech Eng131212220Search in Google Scholar
Benayoun, F., Boumezerane, D., Bekkouche, S.R. et al.(2021). Optimization of geometric parameters of soil nailing using response surface methodology. Arab J Geosci14, 1965 (2021). https://doi.org/10.1007/s12517-021-08280-z.BenayounF.BoumezeraneD.BekkoucheS.R.2021Optimization of geometric parameters of soil nailing using response surface methodologyArab J Geosci1419652021https://doi.org/10.1007/s12517-021-08280-z.Search in Google Scholar
Y.L. Kuo, M.B. Jaksa, A.V. Lyamin, W.S. Kaggwa (2009). ANN-based model for predicting the bearing capacity of strip footingon multi-layered cohesive soil, Computers and Geotechnics 36 (2009) 503–516.KuoY.L.JaksaM.B.LyaminA.V.KaggwaW.S.2009ANN-based model for predicting the bearing capacity of strip footingon multi-layered cohesive soilComputers and Geotechnics362009503516Search in Google Scholar
Jahed Armaghani, D., Shoib, R.S.N.S.B.R., Faizi, K. et al. (2017). Developing a hybrid PSO–ANN model for estimating the ultimate bearing capacity of rock-socketed piles. Neural Comput & Applic 28, 391–405 (2017). https://doi.org/10.1007/s00521-015-2072-z.Jahed ArmaghaniD.ShoibR.S.N.S.B.R.FaiziK.2017Developing a hybrid PSO–ANN model for estimating the ultimate bearing capacity of rock-socketed pilesNeural Comput & Applic283914052017https://doi.org/10.1007/s00521-015-2072-z.Search in Google Scholar
Behera, R. N., C. R. Patra, N. Sivakugan, and B. M. Das. (2013). “Prediction of Ultimate Bearing Capacity of Eccentrically Inclined Loaded Strip Footing by ANN, Part I.” International Journal of Geotechnical Engineering 7 (1): 36–44. doi:10.1179/1938636212Z.00000000012.BeheraR. N.PatraC. R.SivakuganN.Das.B. M.2013“Prediction of Ultimate Bearing Capacity of Eccentrically Inclined Loaded Strip Footing by ANN, Part I.”International Journal of Geotechnical Engineering71364410.1179/1938636212Z.00000000012Open DOISearch in Google Scholar
Sahu, R., C. R. Patra, N. Sivakugan, and B. M. Das.(2017b). “Bearing Capacity Prediction of Inclined Loaded Strip Footing on Reinforced Sand by ANN.” In International Congress and Exhibition” Sustainable Civil Infrastructures: Innovative Infrastructure Geotechnology”, 97–109. Cham: Springer.SahuR.PatraC. R.SivakuganN.DasB. M.2017b“Bearing Capacity Prediction of Inclined Loaded Strip Footing on Reinforced Sand by ANN.”InInternational Congress and Exhibition” Sustainable Civil Infrastructures: Innovative Infrastructure Geotechnology”97109ChamSpringerSearch in Google Scholar
Acharyya R, DeyA (2018). Assessment of bearing capacity for strip footing located near sloping surface considering ANN model. Neural Comput Appl. https://doi.org/10.1007/s00521-018-3661-4.AcharyyaRDeyA2018Assessment of bearing capacity for strip footing located near sloping surface considering ANN modelNeural Comput Applhttps://doi.org/10.1007/s00521-018-3661-4.Search in Google Scholar
Acharyya R, Dey A, Kumar B (2018). Finite element and ANN-based prediction of bearing capacity of square footing resting on the crest of c-φ soil slope, International Journal of Geotechnical Engineering, DOI: 10.1080/19386362.2018.1435022.AcharyyaRDeyAKumarB2018Finite element and ANN-based prediction of bearing capacity of square footing resting on the crest of c-φ soil slopeInternational Journal of Geotechnical Engineering10.1080/19386362.2018.1435022Open DOISearch in Google Scholar
Sethy B.P, Patra C, Das B.C, Sobhan K (2019). Prediction of ultimate bearing capacity of circular foundation on sand layer of limited thickness using artificial neural network, International Journal of Geotechnical Engineering, DOI: 10.1080/19386362.2019.1645437.SethyB.PPatraCDasB.CSobhanK2019Prediction of ultimate bearing capacity of circular foundation on sand layer of limited thickness using artificial neural networkInternational Journal of Geotechnical Engineering10.1080/19386362.2019.1645437Open DOISearch in Google Scholar
Momeni, E., Armaghani, D.J., Fatemi, S.A. et al. (2018). Prediction of bearing capacity of thin-walled foundation: a simulation approach. Engineering with Computers34, 319–327 (2018). https://doi.org/10.1007/s00366-017-0542-x.MomeniE.ArmaghaniD.J.FatemiS.A.2018Prediction of bearing capacity of thin-walled foundation: a simulation approachEngineering with Computers343193272018https://doi.org/10.1007/s00366-017-0542-x.Search in Google Scholar
Acharyya, R., Dey, A. (2018). Assessment of bearing capacity of interfering strip footings located near sloping surface considering artificial neural network technique. J. Mt. Sci.15, 2766–2780 (2018). https://doi.org/10.1007/s11629-018-4986-2.AcharyyaR.DeyA.2018Assessment of bearing capacity of interfering strip footings located near sloping surface considering artificial neural network techniqueJ. Mt. Sci.15276627802018https://doi.org/10.1007/s11629-018-4986-2.Search in Google Scholar
Hossein Moayedi, Sajad Hayati, (2018). Modelling and optimization of ultimate bearing capacity of strip footing near a slope by soft computing methods, Applied Soft Computing, Volume 66, 2018, Pages 208–219, ISSN 1568-4946, https://doi.org/10.1016/j.asoc.2018.02.027.MoayediHosseinHayatiSajad2018Modelling and optimization of ultimate bearing capacity of strip footing near a slope by soft computing methodsApplied Soft Computing662018208219ISSN 1568-4946, https://doi.org/10.1016/j.asoc.2018.02.027.Search in Google Scholar
Muhammad Nouman Amjad Raja, Sanjay Kumar Shukla, Geotextiles and Geomembranes, https://doi.org/10.1016/j.geotexmem.2021.04.007Amjad RajaMuhammad NoumanShuklaSanjay KumarGeotextiles and Geomembraneshttps://doi.org/10.1016/j.geotexmem.2021.04.007Search in Google Scholar
Raja MNA, Shukla SK (2020). An extreme learning machine model for geosynthetic-reinforced sandy soil foundations. Proc Inst Civil Eng-Geotech Eng 175(4):383–403.RajaMNAShuklaSK2020An extreme learning machine model for geosynthetic-reinforced sandy soil foundationsProc Inst Civil Eng-Geotech Eng1754383403Search in Google Scholar
Amjad Raja MN et al., Predicting and validating the load-settlement behavior of large-scale geosynthetic-reinforced soil abutments using hybrid intelligent modeling, Journal of Rock Mechanics and Geotechnical Engineering, https://doi.org/10.1016/j.jrmge.2022.04.012Amjad RajaMNPredicting and validating the load-settlement behavior of large-scale geosynthetic-reinforced soil abutments using hybrid intelligent modelingJournal of Rock Mechanics and Geotechnical Engineeringhttps://doi.org/10.1016/j.jrmge.2022.04.012Search in Google Scholar
Khan, M.U.A., Shukla, S.K. & Raja, M.N.A (2022). Load-settlement response of a footing over buried conduit in a sloping terrain: a numerical experiment-based artificial intelligent approach. Soft Comput26, 6839–6856. https://doi.org/10.1007/s00500-021-06628-xKhanM.U.A.ShuklaS.K.RajaM.N.A2022Load-settlement response of a footing over buried conduit in a sloping terrain: a numerical experiment-based artificial intelligent approachSoft Comput2668396856https://doi.org/10.1007/s00500-021-06628-xSearch in Google Scholar
Bardhan, A., Kardani, N., Alzo’ubi, A.K. et al (2022). A Comparative Analysis of Hybrid Computational Models Constructed with Swarm Intelligence Algorithms for Estimating Soil Compression Index. Arch Computat Methods Eng29, 4735–4773. https://doi.org/10.1007/s11831-022-09748-1BardhanA.KardaniN.Alzo’ubiA.K.2022A Comparative Analysis of Hybrid Computational Models Constructed with Swarm Intelligence Algorithms for Estimating Soil Compression IndexArch Computat Methods Eng2947354773https://doi.org/10.1007/s11831-022-09748-1Search in Google Scholar
Bardhan, A.; Kardani, N.; Alzo’ubi, A.K.; Roy, B.; Samui, P.; Gandomi, A.H (2022). Novel Integration of Extreme Learning Machine and Improved Harris Hawks Optimization with Particle Swarm Optimization-Based Mutation for Predicting Soil Consolidation Parameter. J. Rock Mech. Geotech. Eng., 14, 1588–1608.BardhanA.KardaniN.Alzo’ubiA.K.RoyB.SamuiP.GandomiA.H2022Novel Integration of Extreme Learning Machine and Improved Harris Hawks Optimization with Particle Swarm Optimization-Based Mutation for Predicting Soil Consolidation ParameterJ. Rock Mech. Geotech. Eng.1415881608Search in Google Scholar
Muhammad Nouman Amjad Raja, Sanjay Kumar Shukla & Muhammad Umer Arif Khan (2021): An intelligent approach for predicting the strength of geosynthetic-reinforced subgrade soil, International Journal of Pavement Engineering, DOI: 10.1080/10298436.2021.1904237.Amjad RajaMuhammad NoumanShuklaSanjay KumarUmer Arif KhanMuhammad2021An intelligent approach for predicting the strength of geosynthetic-reinforced subgrade soilInternational Journal of Pavement Engineering10.1080/10298436.2021.1904237Open DOISearch in Google Scholar
Bardhan A, GuhaRay A, Gupta S, Pradhan B, Gokceoglu C (2022). A novel integrated approach of ELM and modified equilibrium optimizer for predicting soil compression index of subgrade layer of dedicated freight corridor. Transp Geotech 32:100678.BardhanAGuhaRayAGuptaSPradhanBGokceogluC2022A novel integrated approach of ELM and modified equilibrium optimizer for predicting soil compression index of subgrade layer of dedicated freight corridorTransp Geotech32100678Search in Google Scholar
Hasthi V, Raja MNA, Hegde A, Shukla SK (2022). Experimental and intelligent modelling for predicting the amplitude of footing resting on geocell-reinforced soil bed under vibratory load. Transp Geotech 100783.HasthiVRajaMNAHegdeAShuklaSK2022Experimental and intelligent modelling for predicting the amplitude of footing resting on geocell-reinforced soil bed under vibratory loadTransp Geotech100783Search in Google Scholar
Montgomery D (2001). Design and analysis of experiments. New York: John Wiley and Sons.MontgomeryD2001Design and analysis of experimentsNew YorkJohn Wiley and SonsSearch in Google Scholar
S.A. Maruyama, S.V. Palombini, T. Claus, F. Carbonera, P.F. Montanher, N.E.D. Souza, M. Matsushita, Application of box-behnken design to the study of fatty acids and antioxidant activity from enriched white bread, J. Braz. Chem. Soc. 24 (9) (2013) 1520–1529.MaruyamaS.A.PalombiniS.V.ClausT.CarboneraF.MontanherP.F.SouzaN.E.D.MatsushitaM.Application of box-behnken design to the study of fatty acids and antioxidant activity from enriched white breadJ. Braz. Chem. Soc.249201315201529Search in Google Scholar
Zerti, A., Yallese, M.A., Meddour, I. et al. (2019). Modeling and multi-objective optimization for minimizing surface roughness, cutting force, and power, and maximizing productivity for tempered stainless steel AISI 420 in turning operations. Int J AdvManuf Technol102, 135–157 (2019). https://doi.org/10.1007/s00170-018-2984-8ZertiA.YalleseM.A.MeddourI.2019Modeling and multi-objective optimization for minimizing surface roughness, cutting force, and power, and maximizing productivity for tempered stainless steel AISI 420 in turning operationsInt J AdvManuf Technol1021351572019https://doi.org/10.1007/s00170-018-2984-8Search in Google Scholar
Y. Nagata, K.H. Chu, (2003). Optimization of a fermentation medium using neural networks and genetic algorithms. Biotechnol. Lett. 25, 1837–1842 (2003).NagataY.ChuK.H.2003Optimization of a fermentation medium using neural networks and genetic algorithmsBiotechnol. Lett.25183718422003Search in Google Scholar
B. Sarkar, A. Sengupta, S. De et al., (2009). Prediction of permeate fluxduring electric field enhanced cross-flow ultrafiltration a neural network approach. Sep. Purif. Technol. 65, 260–268 (2009).SarkarB.SenguptaA.DeS.2009Prediction of permeate fluxduring electric field enhanced cross-flow ultrafiltration a neural network approachSep. Purif. Technol.652602682009Search in Google Scholar
Meddour, I., Yallese, M.A., Bensouilah, H. et al. (2018). Prediction of surface roughness and cutting forces using RSM, ANN, and NSGA-II in finish turning of AISI 4140 hardened steel with mixed ceramic tool. Int J AdvManuf Technol97, 1931–1949 (2018). https://doi.org/10.1007/s00170-018-2026-6.MeddourI.YalleseM.A.BensouilahH.2018Prediction of surface roughness and cutting forces using RSM, ANN, and NSGA-II in finish turning of AISI 4140 hardened steel with mixed ceramic toolInt J AdvManuf Technol97193119492018https://doi.org/10.1007/s00170-018-2026-6.Search in Google Scholar
Kalman BL, Kwasny SC (1992). Why Tanh: choosing a sigmoidal function, Proc. Int. Jt. Conf Neural Network. Baltimore, 4 578–581.KalmanBLKwasnySC1992Why Tanh: choosing a sigmoidal functionProc. Int. Jt. Conf Neural NetworkBaltimore4578581Search in Google Scholar
Labidi, A., Tebassi, H., Belhadi, S. et al. (2018). Cutting Conditions Modeling and Optimization in Hard Turning Using RSM, ANN and Desirability Function. J Fail. Anal. and Preven.18, 1017–1033 (2018). https://doi.org/10.1007/s11668-018-0501-xLabidiA.TebassiH.BelhadiS.2018Cutting Conditions Modeling and Optimization in Hard Turning Using RSM, ANN and Desirability FunctionJ Fail. Anal. and Preven.18101710332018https://doi.org/10.1007/s11668-018-0501-xSearch in Google Scholar
M. Ramezani, A. Afsari, (2015). Surface roughness and cutting force estimation in the CNC turning using artificial neural networks. Manag. Sci. Lett. 5, 357–362 (2015).RamezaniM.AfsariA.2015Surface roughness and cutting force estimation in the CNC turning using artificial neural networksManag. Sci. Lett.53573622015Search in Google Scholar
M. Rajendra, P.C. Jena, H. Raheman, (2009). Prediction of optimized pretreatment process parameters for biodiesel production using ANN and GA. Fuel 88, 868–875 (2009).RajendraM.JenaP.C.RahemanH.2009Prediction of optimized pretreatment process parameters for biodiesel production using ANN and GAFuel888688752009Search in Google Scholar
R.M. Garcia-Gimeno, C. Hervas-Martinez, R. Rodriguez-Perezetal., (2005). Modelling the growth of Leuconostocme senteroides by artificial neural networks. Int. J. Food Microbiol.105, 317–332(2005).Garcia-GimenoR.M.Hervas-MartinezC.Rodriguez-Perezetal.R.2005Modelling the growth of Leuconostocme senteroides by artificial neural networksInt. J. Food Microbiol.1053173322005Search in Google Scholar
K.R. Kashyzadeh, E. Maleki, (2017). Experimental investigation and artificial neural network modeling of warm galvanization and hardened chromium coatings thickness effects on fatigue life of AISI 1045 carbon steel. J. Fail. Anal. Prev. 17(6), 1276–1287(2017).KashyzadehK.R.MalekiE.2017Experimental investigation and artificial neural network modeling of warm galvanization and hardened chromium coatings thickness effects on fatigue life of AISI 1045 carbon steelJ. Fail. Anal. Prev.176127612872017Search in Google Scholar
Huang, C., and Tatsuoka, F. 1990. “Bearing capacity of reinforced horizontal sandy ground.” Geotext. Geomembr., 9, 51–80.HuangC.TatsuokaF.1990“Bearing capacity of reinforced horizontal sandy ground.”Geotext. Geomembr.95180Search in Google Scholar
Khing, K. H., Das, B. M., Puri, V. K., Cook, E. E., and Yen, S. C. 1993. “The bearing capacity of a strip foundation on geogrid rein forceds and.” Geotext. Geomembr., 124, 351–361.KhingK. H.DasB. M.PuriV. K.CookE. E.YenS. C.1993“The bearing capacity of a strip foundation on geogrid rein forceds and.”Geotext. Geomembr.124351361Search in Google Scholar
Shin, E. C., Das, B. M., Lee, E. S., and Atalar, C. 2002. “Bearing capacity of strip foundation on geogrid-reinforced sand.” Geotech. Geologic. Eng., 20, 169–180.ShinE. C.DasB. M.LeeE. S.AtalarC.2002“Bearing capacity of strip foundation on geogrid-reinforced sand.”Geotech. Geologic. Eng.20169180Search in Google Scholar
Cicek E, Guler E, Yetimoglu T (2015). Effect of reinforcement length for different geosynthetic reinforcements on strip footing on sand soil. Soils Found 55(4):661–677.CicekEGulerEYetimogluT2015Effect of reinforcement length for different geosynthetic reinforcements on strip footing on sand soilSoils Found554661677Search in Google Scholar
El Sawwaf M, Nazir AK (2010). Behavior of repeatedly loaded rectangular footings resting on reinforced sand. Alex Eng J 49(4):349–356. https://doi.org/10.1016/j.Egg.2010.07.002El SawwafMNazirAK2010Behavior of repeatedly loaded rectangular footings resting on reinforced sandAlex Eng J494349356https://doi.org/10.1016/j.Egg.2010.07.002Search in Google Scholar
Abu El-Soud S, BelalAM (2019). Numerical modeling of rigid strip shallow foundations overlaying geosythetics-reinforced loose fine sand deposits. Arab J Geosci. https://doi.org/10.1007/s12517-019-4436-7Abu El-SoudSBelalAM2019Numerical modeling of rigid strip shallow foundations overlaying geosythetics-reinforced loose fine sand depositsArab J Geoscihttps://doi.org/10.1007/s12517-019-4436-7Search in Google Scholar
Akinmusuru, J. O., and Akinboladeh, J. A. (1981). “Stability of loaded footings on reinforced soil.” J. Geotech. Engrg. Div., 1076, 819–827.AkinmusuruJ. O.AkinboladehJ. A.1981“Stability of loaded footings on reinforced soil.”J. Geotech. Engrg. Div.1076819827Search in Google Scholar
Das, B. M., and Omar, M. T. (1994). “The effects of foundation width on model tests for the bearing capacity of sand with geogrid reinforcement.” Geotech. Geologic. Eng., 12, 133–141.DasB. M.OmarM. T.1994“The effects of foundation width on model tests for the bearing capacity of sand with geogrid reinforcement.”Geotech. Geologic. Eng.12133141Search in Google Scholar
El Sawwaf, M. 2007. “Behavior of strip footing on geogridrein forceds and over a soft clay slope.” Geotext. Geomembr., 25, 50–60.El SawwafM.2007“Behavior of strip footing on geogridrein forceds and over a soft clay slope.”Geotext. Geomembr.255060Search in Google Scholar
Boushehrian J, Hataf N. (2003). Experimental and numerical investigation of the bearing capacity of model circular and ring footing on reinforced sand. Geotextiles and Geomembranes 2003;21(4):241e56.BoushehrianJHatafN.2003Experimental and numerical investigation of the bearing capacity of model circular and ring footing on reinforced sandGeotextiles and Geomembranes2003214241e56Search in Google Scholar
Mosallanezhad M, Hataf N, Ghahramani A. (2008). Experimental study of bearing capacityof granular soils reinforced with innovative grid-anchor system. Geotechnical and Geological Engineering 2008;26(3):299e312.MosallanezhadMHatafNGhahramaniA.2008Experimental study of bearing capacityof granular soils reinforced with innovative grid-anchor systemGeotechnical and Geological Engineering2008263299e312Search in Google Scholar
Latha M, Somwanshi A. (2009). Effect of reinforcement form on the bearing capacity of square footings on sand. Geotextiles and Geomembranes 2009;27(6):409e22.LathaMSomwanshiA.2009Effect of reinforcement form on the bearing capacity of square footings on sandGeotextiles and Geomembranes2009276409e22Search in Google Scholar
DeMerchant MR, Valsangkar AJ, Schriver AB (2002). Plate loadtests on geogrid reinforced expanded shale lightweight aggregate. Geotext Geomembr 20:173–190.DeMerchantMRValsangkarAJSchriverAB2002Plate loadtests on geogrid reinforced expanded shale lightweight aggregateGeotext Geomembr20173190Search in Google Scholar
A.I Khuri, S. Mukhopadhyay, (2010). Response surface methodology, WIREs. Comput. Stat. 2 (2010) 128–149.KhuriA.IMukhopadhyayS.2010Response surface methodologyWIREs. Comput. Stat.22010128149Search in Google Scholar
R.H. Myers, D.C. Montgomery, (2002). Response surface methodology: process and product optimization using designed experiments, 2nd ed. John Wiley and Sons, Inc. New York. (2002).MyersR.H.MontgomeryD.C.2002Response surface methodology: process and product optimization using designed experiments2nd ed.John Wiley and Sons, Inc.New York2002Search in Google Scholar
A.K. Sahoo, P.C. Mishra, (2014). A response surface methodology and desirability approach for predictive modeling and optimization of cutting temperature in machining hardened steel, Inter. J. Indus. Eng. Comp. 5 (2014) 407–416.SahooA.K.MishraP.C.2014A response surface methodology and desirability approach for predictive modeling and optimization of cutting temperature in machining hardened steelInter. J. Indus. Eng. Comp.52014407416Search in Google Scholar
Bardhan, A.; Kardani, N.; Alzo’ubi, A.K.; Roy, B.; Samui, P.; Gandomi, A.H. Novel Integration of Extreme Learning Machine and Improved Harris Hawks Optimization with Particle Swarm Optimization-Based Mutation for Predicting Soil Consolidation Parameter. J. Rock Mech. Geotech. Eng.2022, 14, 1588–1608.BardhanA.KardaniN.Alzo’ubiA.K.RoyB.SamuiP.GandomiA.H.Novel Integration of Extreme Learning Machine and Improved Harris Hawks Optimization with Particle Swarm Optimization-Based Mutation for Predicting Soil Consolidation ParameterJ. Rock Mech. Geotech. Eng.20221415881608Search in Google Scholar
Khellaf A., Aouici H., Smaiah S., Boutabba S., Yallese M. A., Elbah M., (2016). Comparative assessment of two ceramic cutting tools on surface roughness in hard turning of AISI H11 steel: including 2D and 3D surface topography, Int J AdvManuf Technol, 10.1007/s00170-016-9077-3.KhellafA.AouiciH.SmaiahS.BoutabbaS.YalleseM. A.ElbahM.2016Comparative assessment of two ceramic cutting tools on surface roughness in hard turning of AISI H11 steel: including 2D and 3D surface topographyInt J AdvManuf Technol10.1007/s00170-016-9077-3Open DOISearch in Google Scholar
Reddy NSK, Rao PV (2005). Selection of optimum tool geometry and cutting conditions using a surface roughness prediction model for end milling. Int J AdvManuf Technol 26(11–12):1202–1210.ReddyNSKRaoPV2005Selection of optimum tool geometry and cutting conditions using a surface roughness prediction model for end millingInt J AdvManuf Technol2611–1212021210Search in Google Scholar