<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Industrial systems serve us in all areas of life. Faults may result in economic loss and wasting energy. Detecting the onset of faults, and determining their location are important engineering tasks. An important class of fault detection (FD) and diagnosis methods utilizes the mathematical model of the monitored system. But, the parameters required for mathematical modelling are limited or unavailable for the most real industrial engineering applications. Observer-based FD is one of the main approaches to FD and identification. At the same time, the traditional observer’s gain calculation required system model parameters. So, this article presents the design of a novel observer for FD purposes using the input–output measurements of the system with unknown parameters. This proposed observer’s design considers observer’s gain tuning, regardless of the mathematical representation of the plant. This the new feature that distinction our observer will facilitate the implementation of FD systems for many unknown parameters industrial systems. The effectiveness of the proposed observer is verified by experimental application to BLDC motor and compared with classical Luenberger observer. The experimental and comparison results prove feasibility and effectiveness of the proposed observer for FD purposes.</p></abstract>

Industrial systems serve us in all areas of life. Faults may result in economic loss and wasting energy. Detecting the onset of faults, and determining their location are important engineering tasks. An important class of fault detection (FD) and diagnosis methods utilizes the mathematical model of the monitored system. But, the parameters required for mathematical modelling are limited or unavailable for the most real industrial engineering applications. Observer-based FD is one of the main approaches to FD and identification. At the same time, the traditional observer’s gain calculation required system model parameters. So, this article presents the design of a novel observer for FD purposes using the input–output measurements of the system with unknown parameters. This proposed observer’s design considers observer’s gain tuning, regardless of the mathematical representation of the plant. This the new feature that distinction our observer will facilitate the implementation of FD systems for many unknown parameters industrial systems. The effectiveness of the proposed observer is verified by experimental application to BLDC motor and compared with classical Luenberger observer. The experimental and comparison results prove feasibility and effectiveness of the proposed observer for FD purposes.

Design of Observer-Based Fault Detection Structure for Unknown Systems using Input–Output Measurements: Practical Application to BLDC Drive

Faculty of Engineering, Mechatronics Division, Mechanical Engineering Department

Power Electronics and Drives

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Industrial systems serve us in all areas of life. Faults may result in economic loss and wasting energy. Detecting the onset of faults, and determining their...

Design of Observer-Based Fault Detection Structure for Unknown Systems using Input–Output Measurements: Practical Application to BLDC Drive

Publicado en línea: 26 nov 2019

Páginas: 217 - 226

Recibido: 17 feb 2019

Aceptado: 04 oct 2019

DOI: https://doi.org/10.2478/pead-2019-0017

Palabras clave
fault, sensor, measurements, observer, BLDC motor

© 2019 M. Abdallah Eissa et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Design of Observer-Based Fault Detection Structure for Unknown Systems using Input–Output Measurements: Practical Application to BLDC Drive

Publicado en línea: 26 nov 2019

Páginas: 217 - 226

Recibido: 17 feb 2019

Aceptado: 04 oct 2019

DOI: https://doi.org/10.2478/pead-2019-0017

Palabras clavefault, sensor, measurements, observer, BLDC motor

© 2019 M. Abdallah Eissa et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
fault, sensor, measurements, observer, BLDC motor