1. bookVolumen 65 (2021): Edición 2 (December 2021)
Detalles de la revista
Primera edición
30 Sep 2018
Calendario de la edición
2 veces al año
access type Acceso abierto

Resonant Frequency Ultrasonic P-Waves for Evaluating Uniaxial Compressive Strength of the Stabilized Slag–Cement Sediments

Publicado en línea: 30 Dec 2021
Volumen & Edición: Volumen 65 (2021) - Edición 2 (December 2021)
Páginas: 39 - 62
Recibido: 02 Aug 2021
Aceptado: 29 Nov 2021
Detalles de la revista
Primera edición
30 Sep 2018
Calendario de la edición
2 veces al año

Marine sediments can be stabilized by ultra high-strength binders: cement, Cement Kiln Dust (CKD) and slag. The properties of the stabilized soil indicate potential to their reuse. This study investigated the performance of the unconfined compressive strength (UCS) in the marine sediments stabilized by binder (cement, CKD, slag), tested by ultrasonic P-waves. Materials include 194 specimens collected from the port of Gothenborg. The experiment was performed in Swedish Geotechnical Institute (SGI). The UCS of specimens stabilized by different ratio of binders (cement, CKD, slag) was tested by resonance frequencies of the elastic P-waves. The significant increase in the UCS (>1500 kPa) was recorded for the highest values of CKD and cement, and low values of slag. The correlation profiles of low water/high binder (LW/HB) cement/slag (40/60%) were controlled by curing time. The slag–cement–CKD simplex tests demonstrated UCS of samples with low/high water content and various binder ratio of cement (kg/m3). The ratio of cement binder and curing time play a critical role in the increase of UCS followed by mechanical properties of specimens and intensity of stress. The highest values exceed 1000 m/s in P-waves. The results shown high accuracy (97%) and non-contacting approach for testing UCS of sediments. Seismic methods can be applied to test the UCS of the stabilized sediments, and also in-situ via seismic CPT, surface testing or cross hole seismic testing.


1. Callister W D Jr & Rethwisch D G: “Materials Science & Engineering an Introduction”. New York: John Wiley & Sons, 2018. Search in Google Scholar

2. Groover M P: “Fundamentals of Modern Manufacturing: Materials, Processes, and Systems”. (7th ed). New York, U.S.A: John Wiley & Sons, 2019. Search in Google Scholar

3. Yin B, Wu C, Hou D, Li S, Jin Z, Wang M & Wang X: “Research and application progress of nano-modified coating in improving the durability of cement-based materials”. Progress in Organic Coatings, Vol. 161 (106529), 2021.10.1016/j.porgcoat.2021.106529 Search in Google Scholar

4. Research and Markets: “Global Cement Market (2021 to 2026) - Industry Trends, Share, Size, Growth, Opportunity and Forecasts”, 2021.10.1016/j.focat.2021.07.011 Search in Google Scholar

5. Andersson L, Silfwerbrand J, Selander A & Trägårdh J: “Continuous Preventive Bridge Maintenance of Swedish Municipalities – A Survey on Common Practice”. Nordic Concrete Research, No. 58(1), 2018, pp. 127–142.10.2478/ncr-2018-0008 Search in Google Scholar

6. Jalonen K, Tulonen J & Laaksonen A: “Influence of Cracking on Effects of Restrained Deformations in a Post-tensioned Concrete Bridge”. Nordic Concrete Research, No. 59(1), 2018, pp. 95–110.10.2478/ncr-2018-0017 Search in Google Scholar

7. Mattsson H-Ä, Sundquist H & Silfwerbrand J: “The Real Service Life and Repair Costs for Bridge Edge Beams / Die reale Nutzungsdauer und Reparaturkosten für Brückenkappen”. Restoration of Buildings and Monuments, Vol. 13, no. 4, 2007, pp. 215-228.10.1515/rbm-2007-6140 Search in Google Scholar

8. Veganzones J J, Pacoste C & Karoumi R: “Width and Edge Beam Effects on the Ultimate Behaviour of RC Bridge Overhangs”. Nordic Concrete Research, No. 61(2), 2019, pp. 131–152.10.2478/ncr-2019-0015 Search in Google Scholar

9. SIS: “Methods of testing cement – Part 1: Determination of strength. Swedish Institute for Standards. Swedish standard SS-EN 196-1:2016”. Swedish Institute for Standards, 2021. Search in Google Scholar

10. Ahmed L: “Dynamic Measurements for Determining Poisson’s Ratio of Young Concrete”. Nordic Concrete Research, No. 58(1), 2018, pp. 95–106.10.2478/ncr-2018-0006 Search in Google Scholar

11. Sadagopan M, Malaga K, Lundin M & Nagy A: “Effects of Slag Addition and Mechanical Pre-Processing on the Properties of Recycled Concrete in Terms of Compressive Strength and Workability”. Nordic Concrete Research, No. 64(1), 2021, pp. 11–29.10.2478/ncr-2020-0018 Search in Google Scholar

12. Nielsen C V & Kaasgaard M: “Activation Energy for the Concrete Maturity Model – Part 1: Compressive Strength Tests at Different Curing Temperatures”. Nordic Concrete Research, No. 62(1), 2020, pp. 87–106.10.2478/ncr-2020-0002 Search in Google Scholar

13. Dahlin T, Svensson M & Lindh P: “DC Resistivity and SASW for Validation of Efficiency in Soil Stabilisation Prior to Road Construction”. In: Proceedings EEGS’99, Budapest, Hungary, 6-9 September 1999, pp. 1–3.10.3997/2214-4609.201406466 Search in Google Scholar

14. Mohaghegh A M, Silfwerbrand J & Årskog V: Shear behavior of high-performance basalt fiber concrete—Part II: Laboratory punching shear tests on small slabs with macrofibers without bars. Structural Concrete, Vol. 19, 2018, pp. 331–339.10.1002/suco.201700207 Search in Google Scholar

15. Lindh P & Winter M G: “Sample preparation effects on the compaction properties of Swedish fine-grained tills”. Quarterly Journal of Engineering Geology and Hydrogeology, Vol. 36, No. 4, 2003, pp. 321–330.10.1144/1470-9236/03-018 Search in Google Scholar

16. Lindh P: “Mcv and shear strength of compacted fine-grained tills”. In: Proceedings 12th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering. 4–8 August 2003, Singapore, 2003, pp. 493–496. Search in Google Scholar

17. Lindh P: “Compaction- and strength properties of stabilized and unstabilized fine-grained tills”. ISRN: LUTVDG/TVGT-1013–SE (PhD Thesis). Lund University, Lund, Sweden, 2004, 319 pp. Search in Google Scholar

18. Chang T P, Lin H C, Chang W T & Hsiao J F: “Engineering properties of lightweight aggregate concrete assessed by stress wave propagation methods”. Cement and Concrete Composites, Vol. 28, No. 1, 2006, pp. 57-68.10.1016/j.cemconcomp.2005.08.003 Search in Google Scholar

19. Yang Y, Zhou Q, Li X, Lum G C & Deng Y: “Uniaxial compression mechanical property and fracture behavior of hybrid inorganic short mineral fibers reinforced cement-based material”. Cement and Concrete Composites, Vol. 104, 2019.10.1016/j.cemconcomp.2019.103338 Search in Google Scholar

20. Madhusudhan B N, Clayton C R I & Priest J A: (2019). “The effects of hydrate on the strength and stiffness of some sands”. Journal of Geophysical Research: Solid Earth, Vol. 124, pp. 65–75.10.1029/2018JB015880 Search in Google Scholar

21. Bharadwaj K, Ghantous R M, Sahan F, Isgor O B & Weiss W J: “Predicting pore volume, compressive strength, pore connectivity, and formation factor in cementitious pastes containing fly ash”. Cement and Concrete Composites, Vol. 122, 2021.10.1016/j.cemconcomp.2021.104113 Search in Google Scholar

22. Wang B & Gupta R: “Analyzing bond-deterioration during freeze-thaw exposure in cement-based repairs using non-destructive methods”. Cement and Concrete Composites, Vol. 115, 2021.10.1016/j.cemconcomp.2020.103830 Search in Google Scholar

23. Lindh P, Ryden N & Ekdah U: “Comparison between unconfined compression test and free– free resonant column test”. In: Proceedings of 2nd symposium (TREMTI), Paris, France, 2005. Search in Google Scholar

24. Rydén N, Ekdahl U & Lindh P: “Quality Control of Cement stabilized Soil using Non-Destructive Seismic Tests”. In: Conference Proceedings. Advanced Testing of Fresh Cementitious Materials. August 3-4, 2006, Stuttgart, Germany, 2006, pp. 1-5. Search in Google Scholar

25. Trtnik G & Turk G: “Influence of superplasticizers on the evolution of ultrasonic P-wave velocity through cement pastes at early age”. Cement and Concrete Research, Vol. 51, 2013, pp. 22-31.10.1016/j.cemconres.2013.04.007 Search in Google Scholar

26. TenCate J A, Malcolm A E, Feng X & Fehler M C: “The effect of crack orientation on the nonlinear interaction of a P wave with an S wave”. Geophysical Research Letters, Vol. 43, 2016, pp. 6146–6152.10.1002/2016GL069219 Search in Google Scholar

27. Ryden N, Dahlen U, Lindh P & Jakobsson A: “Impact non-linear reverberation spectroscopy applied to non-destructive testing of building materials”. The Journal of the Acoustical Society of America, Vol. 140, No. 4, 2016, pp. 3327-3327.10.1121/1.4970601 Search in Google Scholar

28. Yan B, Zhu W, Hou C, Yilmaz E & Saadat M: “Characterization of early age behavior of cemented paste backfill through the magnitude and frequency spectrum of ultrasonic P-wave”. Construction and Building Materials, Vol. 249, 2020.10.1016/j.conbuildmat.2020.118733 Search in Google Scholar

29. Halliday D, Resnick R & Walker J: “Fundamentals of Physics”. Part 2. (7th ed.). New York: John Wiley & Sons Ltd, 2005. Search in Google Scholar

30. Červený V: “Seismic Ray Theory”. Cambridge, UK: Cambridge University Press, 2001. Search in Google Scholar

31. Lay T & Wallace T C: “Modern Global Seismology”. San Diego: Academic Press, 1995. Search in Google Scholar

32. Åhnberg H & Holmén M: “Assessment of stabilized soil strength with geophysical methods”. Ground Improvement, Vol. 164, No. 3, 2011, pp. 109–116.10.1680/grim.2011.164.3.109 Search in Google Scholar

33. Verástegui-Flores R D, Di Emidio G, Bezuijen A, Vanwalleghem J & Kersemans M: “Evaluation of the free–free resonant frequency method to determine stiffness moduli of cement-treated soil”. Soils and Foundations, Vol. 55, No. 5, 2015, pp. 943-950.10.1016/j.sandf.2015.09.001 Search in Google Scholar

34. Han T, Gurevich B, Pervukhina M, Clennell M B & Zhang J: “Linking the pressure dependency of elastic and electrical properties of porous rocks by a dual porosity model”. Geophysical Journal International, Vol. 205, No. 1, 2016, pp. 378–388.10.1093/gji/ggw019 Search in Google Scholar

35. Chand S, Minshull T A, Priest J A, Best A I, Clayton C R I & Waite W F: “An effective medium inversion algorithm for gas hydrate quantification and its application to laboratory and borehole measurements of gas hydrate-bearing sediments”. Geophysical Journal International, Vol. 166, No. 2, 2006, pp. 543–552.10.1111/j.1365-246X.2006.03038.x Search in Google Scholar

36. Yoneda J, Jin Y, Katagiri J & Tenma N: “Strengthening mechanism of cemented hydrate-bearing sand at microscales”. Geophysical Research Letters, Vol. 43, 2016, pp. 7442–7450.10.1002/2016GL069951 Search in Google Scholar

37. Pan H, Li H, Chen J, Zhang Y, Cai S, Huang Y, Zheng Y, Zhao Y & Deng J: “A unified contact cementation theory for gas hydrate morphology detection and saturation estimation from elastic-wave velocities”. Marine and Petroleum Geology, Vol. 113, 2020.10.1016/j.marpetgeo.2019.104146 Search in Google Scholar

38. Kim H S, Cho G C & Kwon T H: “Effect of CO2 hydrate formation on seismic wave velocities of fine-grained sediments”. Geochemistry, Geophysics, Geosystems, Vol. 14, 2013, pp. 1787–1799.10.1002/ggge.20102 Search in Google Scholar

39. Khaksar A, Griffiths & McCann C: “Compressional- and shear-wave velocities as a function of confining stress in dry sandstones”. Geophysical Prospecting, Vol. 47, 1999, pp. 487-508.10.1046/j.1365-2478.1999.00146.x Search in Google Scholar

40. Yun T S, Francisca F M, Santamarina J C & Ruppel C: “Compressional and shear wave velocities in uncemented sediment containing gas hydrate”. Geophysical Research Letters, Vol. 32, No. L10609, 2005.10.1029/2005GL022607 Search in Google Scholar

41. Lindh P, Dahlin T & Svensson M: “Comparisons between different test methods for soil stabilisation”. In: Proceedings of the ISRM International Symposium 2000, IS 2000; Melbourne; Australia; 19-24 November 2000, Code 139306, pp. 1–5. Search in Google Scholar

42. Zhu H, Yu H, Ma H & Yang S: “Uniaxial compressive stress-strain curves of magnesium oxysulfate cement concrete”. Construction and Building Materials, 232, 2020.10.1016/j.conbuildmat.2019.117244 Search in Google Scholar

43. Frias Lopez R, Ekblad J & Silfwerbrand J: Resilient properties of binary granular mixtures: A numerical investigation. Computers and Geotechnics, Vol. 76, 2016, pp. 222–233.10.1016/j.compgeo.2016.03.002 Search in Google Scholar

44. Horii H & Nemat-Nasser S: “Compression-Induced Microcrack Growth in Brittle Solids: Axial Splitting and Shear Failure”. Journal of Geophysical Research, Vol. 90, No. B4, 1985, pp. 3105-3125.10.1029/JB090iB04p03105 Search in Google Scholar

45. Hazzard J F & Young R P: “Numerical investigation of induced cracking and seismic velocity changes in brittle rock”. Geophysical Research Letters, Vol. 31, 2004.10.1029/2003GL019190 Search in Google Scholar

46. Wang H, Binder E, Mang H, Yuan Y & Pichler B: “Multiscale structural analysis inspired by exceptional load cases concerning the immersed tunnel of the Hong Kong-Zhuhai-Macao Bridge”. Underground Space, Vol. 3, No. 4, 2018, pp. 252-267.10.1016/j.undsp.2018.02.001 Search in Google Scholar

47. Zhang W, Han L, Gu X, Wang L, Chen F & Liu H: “Tunneling and deep excavations in spatially variable soil and rock masses: A short review”. Underground Space, 2020.10.1016/j.undsp.2020.03.003 Search in Google Scholar

48. Larsen I L, Terjesen O, Thorstensen R T & Kanstad T: “Use of Concrete for Road Infrastructure: A SWOT Analysis Related to the three Catchwords Sustainability, Industrialisation and Digitalisation”. Nordic Concrete Research, No. 60(1), 2019, pp. 31–50.10.2478/ncr-2019-0007 Search in Google Scholar

49. Chung C W, Suraneni P, Popovics J S & Struble L J: “Using ultrasonic wave reflection to monitor false set of cement paste”. Cement and Concrete Composites, Vol. 84, 2017, pp. 10-18.10.1016/j.cemconcomp.2017.08.010 Search in Google Scholar

50. Palomar I & Barluenga G: “Assessment of lime-cement mortar microstructure and properties by P- and S- ultrasonic waves”. Construction and Building Materials, Vol. 139, 2017, pp. 334-341.10.1016/j.conbuildmat.2017.02.083 Search in Google Scholar

51. Lootens D, Schumacher M, Liard M, Jones S Z, Bentz D P, Ricci S & Meacci V: “Continuous strength measurements of cement pastes and concretes by the ultrasonic wave reflection method”. Construction and Building Materials, Vol. 242, 2020.10.1016/j.conbuildmat.2019.117902 Search in Google Scholar

52. Miró M, Eiras J N, Poveda P, Climent M Á & Ramis J: “Detecting cracks due to steel corrosion in reinforced cement mortar using intermodulation generation of ultrasonic waves”. Construction and Building Materials, Vol. 286, 2021.10.1016/j.conbuildmat.2021.122915 Search in Google Scholar

53. Han Z, Li D, Zhou T, Zhu Q & Ranjith P G: “Experimental study of stress wave propagation and energy characteristics across rock specimens containing cemented mortar joint with various thicknesses”. International Journal of Rock Mechanics and Mining Sciences, Vol. 131, 2020.10.1016/j.ijrmms.2020.104352 Search in Google Scholar

54. Lagarde J, Abraham O, Laguerre L, Côte P, Piguet J P, Balland C & Armand G: “Use of surface waves and seismic refraction for the inspection of circular concrete structures”. Cement and Concrete Composites, Vol. 28, No. 4, 2006, pp. 337-348.10.1016/j.cemconcomp.2006.02.014 Search in Google Scholar

55. Niederleithinger E & Taffe A: “Early stage elastic wave velocity of concrete piles”. Cement and Concrete Composites, Vol. 28, No. 4, 2006, pp. 317-320.10.1016/j.cemconcomp.2006.02.013 Search in Google Scholar

56. Trtnik G & Gams M: (2013). “The use of frequency spectrum of ultrasonic P-waves to monitor the setting process of cement pastes”. Cement and Concrete Research, Vol. 43, pp. 1-11. Search in Google Scholar

57. Sleep N H & Erickson B A: “Nonlinear attenuation of S-waves and Love waves within ambient rock”. Geochemistry, Geophysics, Geosystems, Vol. 15, 2014, pp. 1419–1440.10.1002/2014GC005250 Search in Google Scholar

58. Zhan L & Matsushima J: “Frequency-dependent P-wave attenuation in hydrate-bearing sediments: a rock physics study at Nankai Trough, Japan”. Geophysical Journal International, Vol. 214, No. 3, 2018, pp. 1961–1985.10.1093/gji/ggy229 Search in Google Scholar

59. Källén H, Heyden A & Lindh P: “Estimation of grain size in asphalt samples using digital image analysis”. In: Proceedings of SPIE – The International Society for Optical Engineering, 2014.10.1117/12.2061730 Search in Google Scholar

60. Källén H, Heyden A, Åström K & Lindh P: Measuring and evaluating bitumen coverage of stones using two different digital image analysis methods. Measurement, Vol. 84, 2016, pp. 56–67.10.1016/j.measurement.2016.02.007 Search in Google Scholar

61. Lemenkov V & Lemenkova P: “Using TeX Markup Language for 3D and 2D Geological Plotting”. Foundations of Computing and Decision Sciences, Vol. 46, 2021, pp. 43–69.10.2478/fcds-2021-0004 Search in Google Scholar

62. Lemenkov V, Lemenkova P: “Measuring Equivalent Cohesion Ceq of the Frozen Soils by Compression Strength Using Kriolab Equipment”. Civil and Environmental Engineering Reports, Vol. 31, No. 2, 2021, pp. 63–84.10.2478/ceer-2021-0020 Search in Google Scholar

63. Xuequan W, Sheng Y, Xiaodong S, Mingshu T & Liji Y: “Alkali-activated slag cement based radioactive waste forms”. Cement and Concrete Research, Vol. 21, No. 1, 1991, pp. 16-20.10.1016/0008-8846(91)90026-E Search in Google Scholar

64. Zhu D, Mobasher B & Rajan S D: “Non-contacting strain measurement for cement-based composites in dynamic tensile testing”. Cement and Concrete Composites, Vol. 34, No. 2, 2012, pp. 147-155.10.1016/j.cemconcomp.2011.09.011 Search in Google Scholar

65. Oucif C & Mauludin L M: “Numerical modeling of high velocity impact applied to reinforced concrete panel”. Underground Space, Vol. 4, No. 1, 2019, pp. 1-9.10.1016/j.undsp.2018.04.007 Search in Google Scholar

66. Uppalapati S, Vandewalle L & Cizer Ö: “Monitoring the setting process of alkali-activated slag-fly ash cements with ultrasonic P-wave velocity”. Construction and Building Materials, Vol. 271, 2021.10.1016/j.conbuildmat.2020.121592 Search in Google Scholar

67. Meng T, Hong Y, Ying K & Wang Z: “Comparison of technical properties of cement pastes with different activated recycled powder from construction and demolition waste”. Cement and Concrete Composites, Vol. 120, 2021.10.1016/j.cemconcomp.2021.104065 Search in Google Scholar

68. Lahdensivu J, Kekäläinen P & Lahdensivu A: “Alkali-silica Reaction in Finnish Concrete Structures”. Nordic Concrete Research, No. 59(1), 2018, pp. 31–44.10.2478/ncr-2018-0013 Search in Google Scholar

69. Ogata T & Osada K: “Seismic retrofitting of expressway bridges in Japan”. Cement and Concrete Composites, 22(1), 2000, pp. 17–27.10.1016/S0958-9465(99)00045-1 Search in Google Scholar

70. Matsumoto N, Kitago Y & Sato T: “Restoration, seismic strengthening and seismic design for railway viaducts after Hyogoken-Nanbu Earthquake”. Cement and Concrete Composites, Vol. 22, No. 1, 2000, pp. 47–57.10.1016/S0958-9465(99)00048-7 Search in Google Scholar

71. Fabozzi S, Licata V, Autuori S, Bilotta E, Russo G & Silvestri F: “Prediction of the seismic behavior of an underground railway station and a tunnel in Napoli (Italy)”. Underground Space, Vol. 2, No. 2, 2017, pp. 88–105.10.1016/j.undsp.2017.03.005 Search in Google Scholar

72. Arora K, Gutierrez M, Hedayat A & Xia C: “Tunnels in squeezing clay-rich rocks”. Underground Space, 2020.10.1016/j.undsp.2020.07.001 Search in Google Scholar

73. Lindh P: “Optimizing binder blends for shallow stabilisation of fine-grained soils”. Ground Improvement, Vol. 5, 2001, pp. 23–34.10.1680/grim.2001.5.1.23 Search in Google Scholar

74. Singh J, Cilli P A, Hosa, A & Main I G: “Digital rock physics in four dimensions: simulating cementation and its effect on seismic velocity”. Geophysical Journal International, Vol. 222, No. 3, 2020, pp. 1606–1619.10.1093/gji/ggaa271 Search in Google Scholar

75. Revert A B, De Weerdt K, Jakobsen U H & Geiker M R: “Impact of Accelerated Carbonation on Microstructure and Phase Assemblage”. Nordic Concrete Research, No. 59(1), 2018, pp. 111–126.10.2478/ncr-2018-0018 Search in Google Scholar

76. Li G & Zhao X: “Properties of concrete incorporating fly ash and ground granulated blast-furnace slag”. Cement and Concrete Composites, Vol. 25, No. 3, 2003, pp. 293–299.10.1016/S0958-9465(02)00058-6 Search in Google Scholar

77. Badrawi E F & El-kady M S: “Stabilizing soft clay using geo-foam beads and cement bypass dust”. Underground Space, Vol. 5, No. 4, 2020, pp. 292-297.10.1016/j.undsp.2019.05.003 Search in Google Scholar

78. Mavko G, Mukerju T & Dvorkin J: “The Rock Physics Handbook”. Cambridge, UK: Cambridge University Press, 1998. Search in Google Scholar

79. Khan Z, Majid A, Cascante G, Hutchinson D J & Pezeshkpour P: “Characterisation of a cemented sand with the pulse-velocity method”. Canadian Geotechnical Journal, Vol. 43, 2006, pp. 294–309.10.1139/t06-008 Search in Google Scholar

80. Eisner L, Fischer T & Rutledge J T: “Determination of S-wave slowness from a linear array of borehole receivers”. Geophysical Journal International, Vol. 176, No. 1, 2009, pp. 31–39.10.1111/j.1365-246X.2008.03939.x Search in Google Scholar

81. Xu N, Song Z, Guo M Z, Jiang L, Chu H, Pei C, Yu P, Liu Q & Li Z: “Employing ultrasonic wave as a novel trigger of microcapsule self-healing cementitious materials”. Cement and Concrete Composites, Vol. 118, 2021.10.1016/j.cemconcomp.2021.103951 Search in Google Scholar

82. SIS: “Standard Test Methods for Downhole Seismic Testing”. ASTM standard. ASTM D7400/D7400M-19. Swedish Institute for Standards, 2021. Search in Google Scholar

83. SIS: “Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation”. ASTM standard. ASTM D5777-18. Swedish Institute for Standards, 2021. Search in Google Scholar

84. Lillie R J: “Whole Earth Geophysics. An Introductory Textbook for Geologists and Geophysicists”. Oregon State University. U.S.A: Prentice Hall, 1999. Search in Google Scholar

85. Sheriff R E, Geldart L P: “Exploration Seismology”. (2nd ed.). Cambridge, UK: Cambridge University Press, 1995.10.1017/CBO9781139168359 Search in Google Scholar

86. Schlumberger Oilfield Glossary: “P-wave”, 2021. Search in Google Scholar

87. Schlumberger Oilfield Glossary: “S-wave”, 2021. Search in Google Scholar

88. SIS: “Geotechnical investigation and testing – Laboratory testing of soil – Part 7: Unconfined compression test (ISO 17892-7:2017)”. Swedish Institute for Standards, 2021. Search in Google Scholar

89. Myers R H, Montgomery D C & Anderson-Cook C M: “Response Surface Methodology: Process and Product Optimization Using Designed Experiments”. 4th Ed. New York, U.S.A: John Wiley & Sons, 2016. Search in Google Scholar

90. Jersak J, Göransson G, Ohlsson Y, Larsson L, Flyhammar P & Lindh P: “In-situ övertäckning av förorenade sediment. Metodöversikt”. SGI Publikation 30-1, Statens geotekniska institut, Linköping, 2016. Search in Google Scholar

91. Smith W F: “Experimental design for formulation”. ASA-SIAM Series on Statistics and Applied Probability, SIAM, Philadelphia, ASA, Alexandria, VA, 2005. Search in Google Scholar

92. Montgomery D C: Design and Analysis of Experiment. New York: John Wiley & Sons, 1996. Search in Google Scholar

93. Lemenkova P: “Statistical Analysis of the Mariana Trench Geomorphology Using R Programming Language”. Geodesy and Cartography, Vol. 45, No. 2, 2019, pp. 57–84.10.3846/gac.2019.3785 Search in Google Scholar

94. SIS: “Earthworks – Part 4: Soil treatment with lime and/or hydraulic binders”. 2018-12-12, 2018. Search in Google Scholar

95. Aki K & Richards P G: “Quantitative Seismology, Vol. 1: Theory and Methods”. W H Freeman & Co, 1980. Search in Google Scholar

96. Bullen K E & Bolt B A: “An Introduction to the Theory of Seismology”. 4th ed. Cambridge: Cambridge University Press, 1985. Search in Google Scholar

97. Dahlen F A & Tromp J: “Theoretical Global Seismology”. New Jersey: Princeton University Press, 1999.10.1515/9780691216157 Search in Google Scholar

98. Newman W I: “Mathematical Methods for Geophysics and Space Physics Mathematical Methods for Geophysics and Space Physics”. New Jersey: Princeton University Press, 2016.10.1515/9781400882823 Search in Google Scholar

99. Wang Y, Yuan Q, Deng D & Liu Z: “Modeling compressive strength of cement asphalt composite based on pore size distribution”. Construction and Building Materials, Vol. 150, 2017, pp. 714–722.10.1016/j.conbuildmat.2017.06.049 Search in Google Scholar

100. Su J, Wang J, Li Z, Liang X: “Effect of reinforcement grade and concrete strength on seismic performance of reinforced concrete bridge piers”. Engineering Structures, Vol. 198, 2019.10.1016/j.engstruct.2019.109512 Search in Google Scholar

101. Zhang X, Yang Z, Chen X, Guan J, Pei W & Luo T: “Experimental study of frozen soil effect on seismic behavior of bridge pile foundations in cold regions”. Structures, Vol. 32, 2021, pp. 1752–1762.10.1016/j.istruc.2021.03.119 Search in Google Scholar

Artículos recomendados de Trend MD

Planifique su conferencia remota con Sciendo