Dynamic Measurements for Determining Poisson’s Ratio of Young Concrete

1. Ahmed L, Ansell A & Malm R: “Numerical Modelling and Evaluation of Laboratory Tests with Impact Loaded Young Concrete Prisms,” Materials and Structures, Vol. 49, No. 11, November 2016, pp. 4691-4704.10.1617/s11527-016-0817-5Search in Google Scholar

2. Anson M & Newman K: “The Effect of Mix Proportions and Method of Testing on Poisson’s Ratio for Mortars and Concretes,” Magazine of Concrete Research, Vol. 18, No. 56, September 1966, pp. 115-130.10.1680/macr.1966.18.56.115Open DOISearch in Google Scholar

3. Byfors J: “Plain Concrete at Early Ages,” Research Fo 3:80, Swedish Cement and Concrete Institute, Stockholm, 1980, 464 p.Search in Google Scholar

4. Mesbah H A, Lachemi M & Aitcin P-C: “Determination of Elastic Properties of High-Performance Concrete at Early Ages,” ACI Material Journal, Vol. 99, No.1, January 2002, pp. 37-41.10.14359/11314Search in Google Scholar

5. Oluokun F A, Burdette E G & Deatherage J H: “Elastic Modulus, Poisson’s Ratio and Compressive Strength Relationship at Early Ages,” ACI Journal, Vol. 88, No.1, January 1991, pp. 3-10.10.14359/2303Search in Google Scholar

6. EN 1992-1-1: “Eurocode 2: Design of Concrete Structures,” Part 1-1 “General Rules and Rules for Buildings,” European Committee for Standardisation (CEN), Brussels, 2004, 236 p.Search in Google Scholar

7. Bryne L E: “Time Dependent Material Properties of Shotcrete,” Bulletin No. 124, Dept. of Civil and Architectural Engineering, KTH Royal Institute of Technology, Stockholm, Sweden, 2014, 79 p.Search in Google Scholar

8. ASTM C215 − 14: “Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens,” ASTM International; West Conshohocken, Pa, USA, December 2014, 7 p.Search in Google Scholar

9. Hewlett-Packard: “The Fundamentals of Signal Analysis,” Application Note 243, Agilent Technologies, USA, 2000, 86 pSearch in Google Scholar

10. Mathworks Matlab. See http://www.mathworks.com/products/matlab/for further details. Accessed 14/03/2018.Search in Google Scholar

11. Philleo R E: “Comparison of Results of three Methods for Determining Young’s Modulus of Elasticity of Concrete,” ACI Journal, Vol. 26, No. 5, January 1955, pp. 461–469.Search in Google Scholar