[1. Ahmed L, Ansell A & Malm R: “Numerical Modelling and Evaluation of Laboratory Tests with Impact Loaded Young Concrete Prisms,” Materials and Structures, Vol. 49, No. 11, November 2016, pp. 4691-4704.10.1617/s11527-016-0817-5]Search in Google Scholar
[2. Anson M & Newman K: “The Effect of Mix Proportions and Method of Testing on Poisson’s Ratio for Mortars and Concretes,” Magazine of Concrete Research, Vol. 18, No. 56, September 1966, pp. 115-130.10.1680/macr.1966.18.56.115]Open DOISearch in Google Scholar
[3. Byfors J: “Plain Concrete at Early Ages,” Research Fo 3:80, Swedish Cement and Concrete Institute, Stockholm, 1980, 464 p.]Search in Google Scholar
[4. Mesbah H A, Lachemi M & Aitcin P-C: “Determination of Elastic Properties of High-Performance Concrete at Early Ages,” ACI Material Journal, Vol. 99, No.1, January 2002, pp. 37-41.10.14359/11314]Search in Google Scholar
[5. Oluokun F A, Burdette E G & Deatherage J H: “Elastic Modulus, Poisson’s Ratio and Compressive Strength Relationship at Early Ages,” ACI Journal, Vol. 88, No.1, January 1991, pp. 3-10.10.14359/2303]Search in Google Scholar
[6. EN 1992-1-1: “Eurocode 2: Design of Concrete Structures,” Part 1-1 “General Rules and Rules for Buildings,” European Committee for Standardisation (CEN), Brussels, 2004, 236 p.]Search in Google Scholar
[7. Bryne L E: “Time Dependent Material Properties of Shotcrete,” Bulletin No. 124, Dept. of Civil and Architectural Engineering, KTH Royal Institute of Technology, Stockholm, Sweden, 2014, 79 p.]Search in Google Scholar
[8. ASTM C215 − 14: “Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens,” ASTM International; West Conshohocken, Pa, USA, December 2014, 7 p.]Search in Google Scholar
[9. Hewlett-Packard: “The Fundamentals of Signal Analysis,” Application Note 243, Agilent Technologies, USA, 2000, 86 p]Search in Google Scholar
[10. Mathworks Matlab. See http://www.mathworks.com/products/matlab/for further details. Accessed 14/03/2018.]Search in Google Scholar
[11. Philleo R E: “Comparison of Results of three Methods for Determining Young’s Modulus of Elasticity of Concrete,” ACI Journal, Vol. 26, No. 5, January 1955, pp. 461–469.]Search in Google Scholar