[
[1] S.W. Wang, R.H. Colby. ″Linear viscoelasticity and cation conduction in polyurethane sulfonate ionomers with ion in the soft segment-single phase systems″. Macromolecules, 51, pp. 2757-2766, 2018.
]Search in Google Scholar
[
[2] A. Panda, K. Dyadyura, P. Savchuk, V. Kashytskyi, V. Malets, J. Valicek, M. Harnicarova, I. Pandova, L. Androvic, M. Kusnerova. ″The results of theoretical and experimental studies of tribotechnical purposes composites on the basis of epoxy composite material″. MM Science Journal, vol. 10, pp. 3509-3518, 2019.
]Search in Google Scholar
[
[3] A. Panda, K. Dyadyura, M. Harnicarova, J. Valicek, I. Pandova, Z. Palkova. ″The conditions for obtaining self-organized structures on the tribological surfaces of composite materials based on polytetrafluoroethylene which is used in automotive and other demanding technologies″. MM Science Journal, vol. 10, no.4, pp. 3500-3508, 2019.
]Search in Google Scholar
[
[4] X. Zhou, C. Fang, J. Chen, S. Li, Y. Li, W. Lei. ″Correlation of raw materials and waterborne polyurethane properties by sequence similarity analysis″. J Mater Sci Technol, 32 pp. 687-694, 2016.10.1016/j.jmst.2016.02.006
]Search in Google Scholar
[
[5] P.W. Raut, A.A. Shitole, A. Khandwekar, N. Sharma. ″Engineering biomimetic polyurethane using polyethylene glycol and gelatin for blood-contacting applications″. J Mater Sci, 54, pp. 10457-10472, 2019.
]Search in Google Scholar
[
[6] Z. Zhao, Q. Guo Junzhi Qian, G. Pan ″Mechanical Properties and Tribological Behaviour of Polyurethane Elastomer Reinforced with CaCO3 Nanoparticles″. Polymers&Polymer Composites, v. 20, no. 7, pp. 575-580, 2012.10.1177/096739111202000701
]Search in Google Scholar
[
[7] T. Gurunathan, C.R.K. Rao, R. Narayan, K.V.S.N. Raju. ″Synthesis, characterization and corrosion evaluation on new cationomeric polyurethane water dispersions and their polyaniline composites″. Prog Org Coat, 76, pp. 639-647, 2013.10.1016/j.porgcoat.2012.12.009
]Search in Google Scholar
[
[8] Ju.V. Skakun, Ju.M. Nіzel’s’kij ″Termoplastichnі polіuretani: budova, vlastivostі, vikoristannja″. Polіmernij zhurnal, vol. 29, no. 1, pp. 3-9, 2007.
]Search in Google Scholar
[
[9] B. Król, K. Pielichowska, P. Król, M. Kędzierski. ″Polyurethane cationomer films as ecological membranes for building industry″. Prog Org Coat, 130, pp. 83-92, 2019.10.1016/j.porgcoat.2019.01.045
]Search in Google Scholar
[
[10] K. Chen, R. Liu, C. Zou, Q. Shao, Y. Lan, X. Cai, L. Zhai. ″Linear polyurethane ionomers as solid-solid phase change materials for thermal energy storage″. Sol Energy Mater Sol Cells, 130, pp. 466-473, 2014.10.1016/j.solmat.2014.07.036
]Search in Google Scholar
[
[11] V.M. Anisimov, A. Panda, V.V. Anisimov, K. Dyadyra, I. Pandova. ″About wear resistance of linear block-polyurethanes″. MM Science Journal, 2020 (November), pp. 4068-4073, 2020.
]Search in Google Scholar
[
[12] V.N. Anisimov, V.V. Anisimov. ″Technological features of processing linear Block-polyurethanes of different morphology″. Voprosy khimiї i khimicheskoї teknologiї. vol. 4, рр. 5-11, 2019.10.32434/0321-4095-2019-125-4-5-11
]Search in Google Scholar
[
[13] H. Li, C. Liu, X. Zhang, et al. ″Catalyst-free synthesis of isocyanate-blocked imidazole and its use as high-performance latent hardener for epoxy resin″. J Mater Sci., 56, pp. 936-956, 2021.10.1007/s10853-020-05331-w
]Search in Google Scholar
[
[14] N.L. Tai, R. Adhikari, R. Shanks, P. Hakkey, B. Adhikari. ″Flexible starch-polyurethane films: effect mixed macrodiol polyurethane ionomers on physicochemical characteristics and hydrophobicity″. Carbohydr Polym, 197, pp. 312-335, 2018.10.1016/j.carbpol.2018.06.01930007619
]Search in Google Scholar
[
[15] P. Król, B. Król. ″Structures, properties and applications of the polyurethane ionomers″. J Mater Sci, 55, pp. 73-87, 2020.10.1007/s10853-019-03958-y
]Search in Google Scholar
[
[16] A. Panda, Š. Olejárová, J. Valíček and M. Harničárová. “ Monitoring of the condition of turning machine bearing housing through vibrations”. International Journal of Advanced Manufacturing Technology, vol. 97, no. 1-4, pp. 401-411, 2018.10.1007/s00170-018-1871-7
]Search in Google Scholar
[
[17] A. Panda, J. Dobránsky, M. Jančík, I. Pandová and M. Kačalová. “Advantages and effectiveness of the powder metallurgy in manufacturing technologies”. Metalurgija, vol. 57, no. 4, pp. 353-356, 2018.
]Search in Google Scholar
[
[18] J. Valicek, M. Harnicarova, I. Hlavaty, R. Grznárik, M. Kusnerova, Z. Mitaľová and A. Panda. “A new approach for the determination of technological parameters for hydroabrasive cutting of materials”. Materialwissenschaft und Werkstofftechnik, vol. 47, pp. 462-471, 2016.10.1002/mawe.201600522
]Search in Google Scholar
[
[19] A. Panda, V. Nahornyi, I. Pandová, M. Harničárová, M. Kušnerová, J. Valíček and J. Kmec. “Development of the method for predicting the resource of mechanical systems”. International Journal of Advanced Manufacturing Technology, vol. 105, no. 1-4, pp. 1563-1571, 2019.
]Search in Google Scholar
[
[20] J. Macala, I. Pandova and A. Panda. “Zeolite as a prospective material for the purification of automobile exhaust gases”. Mineral resources management, vol. 33, no. 1, pp. 125-138. 2017.10.1515/gospo-2017-0005
]Search in Google Scholar
[
[21] J. Valicek, M. Harnicarova, I. Kopal, Z. Palková, M. Kušnerová, A. Panda and V. Šepelák. “Identification of Upper and Lower Level Yield strength in Materials”. Materials, vol. 10, no. 9, pp. 1-20, 2017.10.3390/ma10090982561563728832526
]Search in Google Scholar
[
[22] K. Sentyakov, et al. “Modeling of Boring Mandrel Working Process with Vibration Damper”. Materials, vol. 13, no. 8, art. no. 1931, 2020.10.3390/ma13081931721603232325969
]Search in Google Scholar
[
[23] A. Panda and J. Duplak. “Comparison of theory and practice in analytical expression of cutting tools durability for potential use at manufacturing of bearings”. Applied Mechanics and Materials, vol. 616, pp. 300-307, 2014.10.4028/www.scientific.net/AMM.616.300
]Search in Google Scholar
[
[24] I. Pandova, A. Panda, J. Valicek, M. Harnicarova, M. Kušnerová and Z. Palková. “Use of sorption of copper cations by clinoptilolite for wastewater treatment”. International Journal of Environmental Research and Public Health, vol. 15, no. 7, pp. 1-12. 2018.10.3390/ijerph15071364606909929958466
]Search in Google Scholar
[
[25] I. Pandova, T. Gondova and K. Dubayova. “Natural and Modified Clinoptilolite Testing for Reduction of Harmful Substance in Manufacturing Exploitation”. Advanced Materials Research, vols. 518-523, pp. 1757-1760, 2012.
]Search in Google Scholar
[
[26] J. Macala, I. Pandova, T. Gondova and K. Dubayova. “Reduction of polycyclic aromatic hydrocarbons and nitrogen monooxide in combustion engine exhaust gases by clinoptilolite”. Gospodarka Surowcami Mineralnymi, vol. 28, no. 2, pp. 113-123. 2012.10.2478/v10269-012-0015-1
]Search in Google Scholar
[
[27] M. Balara, D. Duplakova and D. Matiskova. “Application of a signal averaging device in robotics 2018”. Measurement. vol. 115, pp. 125-132, 2018.10.1016/j.measurement.2017.10.037
]Search in Google Scholar
[
[28] M. Durdan, B. Stehlikova, M. Pastor, J. Kacur, M. Laciak and P. Flegner. “Research of annealing process in laboratory conditions”. Measurement, vol. 73, 2015, pp. 607-618. ISSN 0263-2241.10.1016/j.measurement.2015.06.008
]Search in Google Scholar
[
[29] K. Monkova and P. Monka. “Some aspects influencing production of porous structures with complex shapes of cells”. Lecture Notes in Mechanical Engineering, pp. 267-276, 2017.10.1007/978-3-319-56430-2_19
]Search in Google Scholar
[
[30] L. Sukhodub, A. Panda, L. Sukhodub, M. Kumeda, K. Dyadyura and I. Pandová. “Hydroxyapatite and zinc oxide based two-layer coating, deposited on ti6al4v substrate”, MM Science Journal, pp. 3494-3499, (2019).10.17973/MMSJ.2019_12_2019030
]Search in Google Scholar
[
[31] A. Panda, K. Dyadyura, J. Valicek, M. Harnicarova, J. Zajac, V. Modrak, I. Pandova, P. Vrabel, E. Novakova-Marcincinova and Z. Pavelek. “Manufacturing Technology of Composite Materials-Principles of Modification of Polymer Composite Materials Technology Based on Polytetrafluoroethylene”. Materials, vol. 10, no. 4, pp. 337, 2017.10.3390/ma10040377550690828772733
]Search in Google Scholar
[
[32] J. Dobránsky, M. Pollák and Z. Doboš. “Assessment of production process capability in the serial production of components for the automotive industry”. Management Systems in Production Engineering, vol. 27, no. 4, pp. 255-258, 2019.10.1515/mspe-2019-0040
]Search in Google Scholar
[
[33] M. Pollák, J. Torok, J. Zajac, M. Kočiško and M. Teliskova. “The structural design of 3D print head and execution of printing via the robotic arm ABB IRB 140”. ICIEA 2018, vol. 2018, pp. 194-198, 2018.
]Search in Google Scholar
[
[34] W. Bialy and J. Ružbarský. “Breakdown cause and effect analysis. Case study”. Management Systems in Production Engineering, vol. 26, pp. 83-87, 2018.10.1515/mspe-2018-0013
]Search in Google Scholar
[
[35] D. Duplakova, L. Knapcikova, M. Hatala and E. Szilagyi. “Mathematical modelling of temperature characteristics of RFID tags with their subsequent application in engineering production”. TEM Journal-Technology Education Management Informatics, vol. 5, pp. 411-416, 2016.
]Search in Google Scholar
[
[36] Ľ. Straka, I. Čorný and J. Piteľ. “Properties evaluation of thin microhardened surface layer of tool steel after wire EDM”. Metals, vol. 6, no. 5, pp. 1-16, 2016.10.3390/met6050095
]Search in Google Scholar