<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this study, the effect of Persian gum (PG) as a novel gum to be used in edible films was examined. Sorbitol-plasticized whey protein isolate (WPI) films with incorporation of PG in different ratios (100:0, 80:20, 60:40, 50:50, 40:60 and 20:80 WPI: PG) were prepared. The effects of PG concentration on the physicochemical properties; water vapour permeability (WVP), moisture sorption isotherms and mechanical properties; tensile strength (σ<sub>max</sub>) and elongation at break (%EB) were observed. Incorporation of PG in the film matrix significantly increased WVP (p&lt;0.05) when added in ratios 60:40, 50:50, 40:60 and further increased in the ratio of 20:80 (WPI: PG). The moisture uptake of the films was not greatly influenced by the increment of PG. Addition of PG in the lowest concentration of 80:20 (WPI: PG) highly decreased the tensile strength of the films; however further addition of PG did not cause any great decrement. A significantly higher elongation was observed especially when PG was present in ratios 40:60 and 20:80 (WPI: PG). Overall, incorporation of PG in sorbitol-plasticized WPI films affected positively the elongation characteristics. However, improvement is needed for WVP to retain more stable values. This study suggests further examination of the soluble and insoluble fractions of PG using different polymers and plasticizers. A study on the antimicrobial properties of PG in edible films could also be examined since PG is traditionally used as a remedy.</p>
</abstract>

In this study, the effect of Persian gum (PG) as a novel gum to be used in edible films was examined. Sorbitol-plasticized whey protein isolate (WPI) films with incorporation of PG in different ratios (100:0, 80:20, 60:40, 50:50, 40:60 and 20:80 WPI: PG) were prepared. The effects of PG concentration on the physicochemical properties; water vapour permeability (WVP), moisture sorption isotherms and mechanical properties; tensile strength (σmax) and elongation at break (%EB) were observed. Incorporation of PG in the film matrix significantly increased WVP (p<0.05) when added in ratios 60:40, 50:50, 40:60 and further increased in the ratio of 20:80 (WPI: PG). The moisture uptake of the films was not greatly influenced by the increment of PG. Addition of PG in the lowest concentration of 80:20 (WPI: PG) highly decreased the tensile strength of the films; however further addition of PG did not cause any great decrement. A significantly higher elongation was observed especially when PG was present in ratios 40:60 and 20:80 (WPI: PG). Overall, incorporation of PG in sorbitol-plasticized WPI films affected positively the elongation characteristics. However, improvement is needed for WVP to retain more stable values. This study suggests further examination of the soluble and insoluble fractions of PG using different polymers and plasticizers. A study on the antimicrobial properties of PG in edible films could also be examined since PG is traditionally used as a remedy.

Physicochemical and mechanical properties of edible films based on WPI and a novel hydrocolloid: Persian gum

Department of Food Science and Technology

MASO INTERNATIONAL – JOURNAL OF FOOD SCIENCE AND TECHNOLOGY

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In this study, the effect of Persian gum (PG) as a novel gum to be used in edible films was examined. Sorbitol-plasticized whey protein isolate (WPI) films...

Physicochemical and mechanical properties of edible films based on WPI and a novel hydrocolloid: Persian gum

Publicado en línea: 28 nov 2022

Páginas: 25 - 33

DOI: https://doi.org/10.2478/mjfst-2022-0010

Palabras clave
Edible films, Persian gum, Whey protein isolate, Sorbitol, Physical and mechanical properties

© 2022 Reno Georgiou et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Physicochemical and mechanical properties of edible films based on WPI and a novel hydrocolloid: Persian gum

Publicado en línea: 28 nov 2022

Páginas: 25 - 33

DOI: https://doi.org/10.2478/mjfst-2022-0010

Palabras claveEdible films, Persian gum, Whey protein isolate, Sorbitol, Physical and mechanical properties

© 2022 Reno Georgiou et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
Edible films, Persian gum, Whey protein isolate, Sorbitol, Physical and mechanical properties