Effect of Fe-Ni Substitution in FeNiSiB Soft Magnetic Alloys Produced by Melt Spinning

1. I.A. Figueroa, I. Betancourt, G. Lara, J.A. Verduzco, Effect of B, Si and Cr on the mechanical properties of Fe-based amorphous metallic ribbons, J. Non. Cryst. Solids. 351 (2005) 3075–3080. https://doi.org/10.1016/j.jnoncrysol.2005.07.017.10.1016/j.jnoncrysol.2005.07.017 Search in Google Scholar

2. L. Guo, S. Geng, X. Gao, W. Wang, Numerical simulation of heat transfer and fluid flow during nanosecond pulsed laser processing of Fe78Si9B13 amorphous alloys, Int. J. Heat Mass Transf. 170 (2021). https://doi.org/10.1016/j.ijheatmasstransfer.2021.121003.10.1016/j.ijheatmasstransfer.2021.121003 Search in Google Scholar

3. A. Inoue, Stabilization of metallic supercooled liquid and bulk amorphous alloys, Acta Mater. 48 (2000) 279–306. https://doi.org/10.1016/S1359-6454(99)00300-6.10.1016/S1359-6454(99)00300-6 Search in Google Scholar

4. S. Cui, H. Zhai, W. Li, X. Fan, X. Li, W. Ning, D. Xiong, Microstructure and corrosion resistance of Fe-based amorphous coating prepared by detonation spray, Surf. Coat. Technol. 399 (2020) 126096. https://doi.org/10.1016/j.surfcoat.2020.126096.10.1016/j.surfcoat.2020.126096 Search in Google Scholar

5. M.F. Kilicaslan, S.I. Elburni, B. Akgul, The effects of nb addition on the microstructure and mechanical properties of melt spun Al-7075 alloy, Adv. Mater. Sci. 21 (2021) 17–19. https://doi.org/10.2478/adms-2021-0008.10.2478/adms-2021-0008 Search in Google Scholar

6. L. Zhu, S.S. Jiang, Z.Z. Yang, G.B. Han, S.S. Yan, Y.G. Wang, Magnetic properties of a Febased amorphous alloy with stress gradient, J. Magn. Magn. Mater. 519 (2021) 167513. https://doi.org/10.1016/j.jmmm.2020.167513.10.1016/j.jmmm.2020.167513 Search in Google Scholar

7. C. Chang, T. Kubota, A. Makino, A. Inoue, Synthesis of ferromagnetic Fe-based bulk glassy alloys in the Fe–Si–B–P–C system, J. Alloys Compd. 473 (2009) 368–372. https://doi.org/10.1016/j.jallcom.2008.05.088.10.1016/j.jallcom.2008.05.088 Search in Google Scholar

8. A. Makino, H. Men, T. Kubota, K. Yubota, A. Inoue, FeSiBPCu nanocrystalline soft magnetic alloys with high B_s of 1.9 Tesla produced by crystallizing hetero-amorphous phase, Mater. Trans. 50 (2009) 204-209. https://doi.org/10.2320/matertrans.MER2008306.10.2320/matertrans.MER2008306 Search in Google Scholar

9. P. Duwez, R. H. Willens, W. Klement, Continuous Series of Metastable Solid Solutions in Silver Copper Alloys, J. Appl. Phys. 31 (1960) 1136. https://doi.org/10.1063/1.1735777.10.1063/1.1735777 Search in Google Scholar

10. X. Jia, Y. Li, L. Wu, W. Zhang, A study on the role of Ni content on structure and properties of Fe-Ni-Si-B-P-Cu nanocrystalline alloys, J. Alloys Compd. 822 (2020) 152784. https://doi.org/10.1016/j.jallcom.2019.152784.10.1016/j.jallcom.2019.152784 Search in Google Scholar

11. M. Ohta, Y. Yoshizawa, Cu addition effect on soft magnetic properties in Fe-Si-B alloy system, J. Appl. Phys. 103 (2008) 07E722. 722 (2015). https://doi.org/10.1063/1.2829240.10.1063/1.2829240 Search in Google Scholar

12. Y. Zhang, P. Sharma, A. Makino, Effects of cobalt addition in nanocrystalline Fe83.3Si4B8P4Cu0.7 soft magnetic alloy, IEEE Trans. Magn. 50 (2014) 2003004. Search in Google Scholar

13. A. Inoue, A. Takeuchi, T. Zhang, Ferromagnetic bulk amorphous alloys, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 29 (1998) 1779–1793. https://doi.org/10.1007/s11661-998-0001-9.10.1007/s11661-998-0001-9 Search in Google Scholar

14. C. Si, Z. Zhang, Q. Zhang, J. Cai, Influence of mechanical alloying on the particle size, microstructure and soft magnetic properties of coarse Fe-based amorphous powders prepared by gas atomization, J. Non. Cryst. Solids. 559 (2021) 120675. https://doi.org/10.1016/j.jnoncrysol.2021.120675.10.1016/j.jnoncrysol.2021.120675 Search in Google Scholar

15. S. Cui, G. Ouyang, T. Ma, C. R. Macziewski, V. I. Levitas, L. Zhou, M. J. Kramer, J. Cui, Thermodynamic and kinetic analysis of the melt spinning process of Fe-6.5 wt.% Si alloy, J. Alloys Compd. 771 (2019) 643–648. https://doi.org/10.1016/J.JALLCOM.2018.08.293.10.1016/j.jallcom.2018.08.293 Search in Google Scholar

16. Y.F. Liang, S. Wang, H. Li, Y.M. Jiang, F. Ye, J. P. Lin, Fabrication of Fe-6.5wt%Si Ribbons by Melt Spinning Method on Large Scale, Adv. Mater. Sci. Eng. 2015 (2015). https://doi.org/10.1155/2015/296197.10.1155/2015/296197 Search in Google Scholar

17. S. Wang, Y. M. Jiang, Y. F. Liang, F. Ye, J. P. Lin, Magnetic properties and core loss behavior of Fe-6.5wt.%Si ribbons prepared by melt spinning, Adv. Mater. Sci. Eng. 2015 (2015). https://doi.org/10.1155/2015/410830.10.1155/2015/410830 Search in Google Scholar

18. M. Imani, M. H. Enayati, Investigation of amorphous phase formation in Fe-Co-Si-B-P-Thermodynamic analysis and comparison between mechanical alloying and rapid solidification experiments, J. Alloys Compd. 705 (2017) 462–467. https://doi.org/10.1016/j.jallcom.2017.02.100.10.1016/j.jallcom.2017.02.100 Search in Google Scholar

19. A. Inoue, T. Masumoto, Mg-based amorphous alloys, Mater. Sci. Eng. A. 173 (1993) 1–8. https://doi.org/10.1016/0921-5093(93)90175-E.10.1016/0921-5093(93)90175-E Search in Google Scholar

20. T. Tamura, M. Li, Influencing factors on the amorphous phase formation in Fe–7.7 at% Sm alloys solidified by high-speed melt spinning, J. Alloys Compd. 826 (2020) 154010. https://doi.org/10.1016/j.jallcom.2020.154010.10.1016/j.jallcom.2020.154010 Search in Google Scholar

21. G. Ennas, M. Magini, F. Padella, P. Susini, G. Boffitto, G. Licheri, Preparation of amorphous Fe-Zr alloys by mechanical alloying and melt spinning methods - Part 1 A structural comparison, J. Mater. Sci. 24 (1989) 3053–3058. https://doi.org/10.1007/BF01139017.10.1007/BF01139017 Search in Google Scholar

22. C. Wu, K. Lin, Y. Cheng, C. Huang, C. Pan, W. Li, L. Chiang, C. Yeh, S. Fong, Development of Amorphous Ribbon Manufacturing Technology, China Steel Tech. Rep. (2014) 28–42. Search in Google Scholar

23. G. Herzer, Modern soft magnets: Amorphous and nanocrystalline materials, Acta Mater. 61 (2013) 718–734. https://doi.org/10.1016/j.actamat.2012.10.040.10.1016/j.actamat.2012.10.040 Search in Google Scholar

24. X. D. Fan, B.L. Shen, Crystallization behavior and magnetic properties in High Fe content FeBCSiCu alloy system, J. Magn. Magn. Mater. 385 (2015) 277–281. https://doi.org/10.1016/j.jmmm.2015.03.033.10.1016/j.jmmm.2015.03.033 Search in Google Scholar

25. N. Yodoshi, S. Ookawa, R. Yamada, N. Nomura, K. Kikuchi, A. Kawasaki, Effects of nanocrystallisation on saturation magnetisation of amorphous Fe76Si9B10P5, Mater. Res. Lett. 6 (2018) 100–105. https://doi.org/10.1080/21663831.2017.1398191.10.1080/21663831.2017.1398191 Search in Google Scholar

26. K. Suzuki, R. Parsons, B. Zang, K. Onodera, H. Kishimoto, T. Shoji, A. Kato, Nanocrystallization of amorphous alloys by ultra-rapid annealing: An effective approach to magnetic softening, J. Alloys Compd. 735 (2018) 613–618. https://doi.org/10.1016/j.jallcom.2017.11.110.10.1016/j.jallcom.2017.11.110 Search in Google Scholar

27. T. Kulik, Nanocrystallization of metallic glasses, J. Non. Cryst. Solids. 287 (2001) 145–161. https://doi.org/10.1016/S0022-3093(01)00627-5.10.1016/S0022-3093(01)00627-5 Search in Google Scholar

28. B. A. Luciano, C. S. Kiminami, An amorphous core transformer: Design and experimental performance, Mater. Sci. Eng. A. 226–228 (1997) 1079–1082. https://doi.org/10.1016/s0921-5093(96)10863-7.10.1016/S0921-5093(96)10863-7 Search in Google Scholar

29. F. Wan, T. Liu, F. Kong, A. Wang, M. Tian, J. Song, J. Zhang, C. Chang, X. Wang, Surface crystallization and magnetic properties of FeCuSiBNbMo melt-spun nanocrystalline alloys, Mater. Res. Bull. 96 (2017) 275–280. https://doi.org/10.1016/j.materresbull.2017.01.026.10.1016/j.materresbull.2017.01.026 Search in Google Scholar

30. Y. Yoshizawa, S. Oguma, K. Yamauchi, New Fe-based soft magnetic alloys composed of ultrafine grain structure, J. Appl. Phys. 64 (1988) 6044–6046. https://doi.org/10.1063/1.342149.10.1063/1.342149 Search in Google Scholar

31. J. G. Wang, H. Zhao, C. X. Xie, C. T. Chang, S. M. Zhou, J. Q. Feng, J. T. Huo, W. H. Li, In-situ synthesis of nanocrystalline soft magnetic Fe-Ni-Si-B alloy, J. Alloys Compd. 790 (2019) 524–528. https://doi.org/10.1016/j.jallcom.2019.03.226.10.1016/j.jallcom.2019.03.226 Search in Google Scholar

32. E. Dastanpour, M. H. Enayati, A. Masood, V. Ström, Crystallization behavior, soft magnetism and nanoindentation of Fe-Si-B-P-Cu alloy on Ni substitution, J. Alloys Compd. 851 (2021) 156727. https://doi.org/10.1016/j.jallcom.2020.156727.10.1016/j.jallcom.2020.156727 Search in Google Scholar

33. Z. Li, Y. Wu, B. Zhuang, X. Zhao, Y. Tang, X. Ding, Preparation of novel copper-powder-sintered frame / paraffin form-stable phase change materials with extremely high thermal conductivity, Appl. Energy. 206 (2017) 1147–1157. https://doi.org/10.1016/j.apenergy.2017.10.046.10.1016/j.apenergy.2017.10.046 Search in Google Scholar

34. V. I. Tkatch, A. I. Limanovskii, S. N. Denisenko, S. G. Rassolov, The effect of the melt-spinning processing parameters on the rate of cooling, Mater. Sci. Eng. A. 323 (2002) 91–96. https://doi.org/10.1016/S0921-5093(01)01346-6.10.1016/S0921-5093(01)01346-6 Search in Google Scholar

35. O. Uzun, M. F. Kılıçaslan, F. Yılmaz, Formation of novel flower-like silicon phases and evaluation of mechanical properties of hypereutectic melt-spun Al-20Si-5Fe alloys with addition of V, Mater. Sci. Eng. A. 607 (2014) 368–375. https://doi.org/10.1016/j.msea.2014.04.025.10.1016/j.msea.2014.04.025 Search in Google Scholar

36. M. Çelebi, O. Güler, A. Çanakçı, H. Çuvalcı, The effect of nanoparticle content on the microstructure and mechanical properties of ZA27-Al2O3-Gr hybrid nanocomposites produced by powder metallurgy, J. Compos. Mater. 55 (2021) 3395–3408. https://doi.org/10.1177/00219983211015719.10.1177/00219983211015719 Search in Google Scholar

37. A. H. Karabacak, A. Çanakçı, F. Erdemir, S. Özkaya, M. Çelebi, Effect of different reinforcement on the microstructure and mechanical properties of AA2024-based metal matrix nanocomposites, Int. J. Mater. Res. 111 (2020) 416–423. https://doi.org/10.3139/146.111901.10.3139/146.111901 Search in Google Scholar

38. A. Inoue, Stabilization of metallic supercooled liquid and bulk amorphous alloys, Acta Mater. 48 (2000) 279-306. https://doi.org/10.1016/S1359-6454(99)00300-6.10.1016/S1359-6454(99)00300-6 Search in Google Scholar

39. Y. L. Li, Z. X. Dou, X. M. Chen, K. Lv, F. S. Li, X.D. Hui, Improving the amorphous forming ability and magnetic properties of FeSiBPCu amorphous and nanocrystalline alloys by utilizing carbon, J. Alloys Compd. 844 (2020). https://doi.org/10.1016/j.jallcom.2020.155767.10.1016/j.jallcom.2020.155767 Search in Google Scholar

40. A. Inoue, A. Takeuchi, T. Zhang, A. Murakami, Soft Magnetic Properties of Bulk Fe-Based Amorphous Alloys Prepared by Copper Mold Casting, IEEE Trans. Magn. 32 (1996) 4866–4871.10.1109/20.539178 Search in Google Scholar

41. A. Takeuchi, A. Inoue, Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element, Mater. Trans. 46 (2005) 2817-2829. https://doi.org/10.2320/matertrans.46.2817.10.2320/matertrans.46.2817 Search in Google Scholar

42. M. Ipatov, V. Zhukova, L. Dominguez, K.L. Alvarez, A. Chizhik, A. Zhukov, J. Gonzalez, Structural and low-temperature magnetic properties of as-quenched and annealed Ni–Si–B alloys produced by rapid solidification, Intermetallics. 132 (2021) 107140. https://doi.org/10.1016/j.intermet.2021.107140.10.1016/j.intermet.2021.107140 Search in Google Scholar

43. B. Q. Chi, C. Li, Z.H. Huang, Mixing entropy difference between liquid and crystal of Fe base amorphous alloys, J Non Cryst Solids. 402 (2014) 178–181. https://doi.org/10.1016/j.jnoncrysol.2014.05.032.10.1016/j.jnoncrysol.2014.05.032 Search in Google Scholar

44. L. Shi, X. Qin, K. Yao, Tailoring soft magnetic properties of Fe-based amorphous alloys through C addition, Prog. Nat. Sci. Mater. Int. 30 (2020) 208–212. https://doi.org/10.1016/j.pnsc.2020.02.001.10.1016/j.pnsc.2020.02.001 Search in Google Scholar

45. Q. Liu, H. Liu, M. Wang, Y. Zhang, Z. Ma, Y. Zhao, W. Yang, Effects of Ni substitution for Fe on magnetic properties of Fe_{80 - x}Ni_xP₁₃C₇ (x = 0-30) glassy ribbons, J. Non. Cryst. Solids. 463 (2017) 68–71. https://doi.org/10.1016/j.jnoncrysol.2017.03.005.10.1016/j.jnoncrysol.2017.03.005 Search in Google Scholar

46. J. Zhou, W. Yang, C. Yuan, B. Sun, B. Shen, Ductile FeNi-based bulk metallic glasses with high strength and excellent soft magnetic properties, J. Alloys Compd. 742 (2018) 318–324. https://doi.org/10.1016/j.jallcom.2018.01.317.10.1016/j.jallcom.2018.01.317 Search in Google Scholar

47. H. R. Lashgari, D. Chu, S. Xie, H. Sun, M. Ferry, S. Li, Composition dependence of the microstructure and soft magnetic properties of Fe-based amorphous/nanocrystalline alloys: A review study, J. Non-Cryst. Solids. 391 (2014) 61–82. https://doi.org/10.1016/j.jnoncrysol.2014.03.010.10.1016/j.jnoncrysol.2014.03.010 Search in Google Scholar

48. T. Mizoguchi, K. Yamauchi, H. Miyajima, Ferromagnetism of Amorphous Iron Alloys. Proceedings of the International Symposium on Amorphous Magnetism, Detroit, Michigan, USA, 1973, 325–330. https://doi.org/10.1007/978-1-4613-4568-8_35.10.1007/978-1-4613-4568-8_35 Search in Google Scholar

49. W. Yang, H. Liu, L. Xue, J. Li, C. Dun, J. Zhang, Magnetic properties of (Fe_1-xNix)₇₂B₂₀Si₄Nb₄ (x=0.0–0.5) bulk metallic glasses, J. Magn. Magn. Mater. 335 (2013) 172–176. https://doi.org/10.1016/j.jmmm.2013.02.004.10.1016/j.jmmm.2013.02.004 Search in Google Scholar

50. W. Yang, H. Liu, Y. Zhao, A. Inoue, K. Jiang, J. Huo, H. Ling, Q. Li, B. Shen, Mechanical properties and structural features of novel Fe-based bulk metallic glasses with unprecedented plasticity, Sci. Rep. 6233 (2014) 1-6. https://doi.org/10.1038/srep06233.10.1038/srep06233538582425167887 Search in Google Scholar

51. A. Mitra, R.K. Roy, B. Mahato, A.K. Panda, G. Vlasak, D. Janickovic, P. Svec, Development of FeSiB/CoSiB Bilayered Melt-spun Ribbon by Melt-spinning Technique, J. Supercond. Nov. Magn. 2010 241. 24 (2010) 611–615. https://doi.org/10.1007/S10948-010-0955-X.10.1007/s10948-010-0955-x Search in Google Scholar