Signal Sensing By The Architecture Of Embedded I/O Pad Circuits

[1]International Technology Roadmap for Semiconductors, pp. 88-89, 2011. Search in Google Scholar

[2]G. Heinen, R. J. Stierman, D. Edwards, and L. Nye, “Wire Bonds Over Active Circuits”, in Proceedings of Electronic Components and Technology Conference, 1994, pp. 922–928. Search in Google Scholar

[3]M. Tagami, H. Ohtake, M. Abe, F. Ito, T. Takeuchi, K. Ohto, T. Usami, M. Suzuki, T. Suzuki, N. Sashida, Y. Hayashi, “Comprehensive Process Design for Low-cost Chip Packaging With Circuit-under-pad (CUP) Structure in Porous-SiOCH Film”, in IEEE International Interconnect Technology Conference, 2005, pp. 12-14. Search in Google Scholar

[4]M. Tagami, F. Ito, N. Inoue, Y. Hayashi, “Material and Structure Designs for Reliable Quad Flat-Package for Scaled-Down Ultra Large Scale Integrations with Porous Low Interconnects”, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 3, no. 3, pp. 384-390, 2013.10.1109/TCPMT.2012.2220770 Search in Google Scholar

[5]S. Hunter, J. Martinez, C. Salas, M. Salas, J. Schofield, S. Sheffield, K. Wilkins, B. Rasmussen, T. Ruud, V. McBride, “Use of Harsh Wafer Probing to Evaluate Traditional and CUP Bond Pad Structures”, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 3, no. 4, pp. 1-8, 2013.10.1109/TCPMT.2012.2236384 Search in Google Scholar

[6]Ming-Dou Ker, Jeng-Jie Peng, “Fully Process Compatible Layout Design on Bond Pad to Improve Wire Bond Reliability in CMOS ICs”, IEEE Transactions on Electron Devices, vol. 25, no. 2, pp. 309-316, 2002.10.1109/TCAPT.2002.1010022 Search in Google Scholar

[7]Lim Chee Chian and Goh koh Hoo, “AuAg Alloy Wire Bonding Process Capability and Reliability Assessment”, in 11th International Symposium on Advanced Packaging Materials: Processes, Properties and Interface, 2006, p. 158. Search in Google Scholar

[8]Wei-Sun Loh, M. Corfield, Hua Lu, S. Hogg, T. Tilford, C.M. Johnson, “Wire Bond Reliability for Power Electronic Modules-Effect of Bonding Temperature”, in International Conference on Thermal, Mechanical and Multi-Physics Simulation Experiments in Microelectronics and Micro-Systems, 2007, pp. 1-6. Search in Google Scholar

[9]M.J. McCracken, Hyoung Joon Kim, M. Mayer, J. Persic, June Sub Hwang, Jeong-Tak Moon, “Assessing Au-Al wire bond reliability using integrated stress sensors”, in 12th IEEE Intersociety Conference on Thermal and Thermo-mechanical Phenomena in Electronic Systems, 2010, pp. 1-9.10.1109/ITHERM.2010.5501278 Search in Google Scholar

[10]J. Goehre, U. Geissler, M. Schneider-Ramelow, K. Lang, “Influence of Bonding Parameters on the Reliability of Heavy Wire Bonds on Power Semiconductors”, in 7th International Conference on Integrated Power Electronics Systems, 2012, pp. 1-6. Search in Google Scholar

[11]UMC-Fab 0.5 μm 5 V/18 V Polycide Process Design Rules, 2006. Search in Google Scholar

[12]Advanced Design System (ADS) software, Agilent Technologies, Ver. 2009. Search in Google Scholar

[13]O. Malik, F. J. De la Hidalga-W, “Device Application of Non-equilibrium MOS Capacitors Fabricated on High Resistivity Silicon”, International Journal on Smart Sensing and Intelligent Systems, vol. 4, no. 4, pp. 686-697, 2011.10.21307/ijssis-2017-463 Search in Google Scholar

[14]N. Eidenberger and B. G. Zagar, “Capacitive Sensor Design Utilizing Conformal Mapping Methods”, International Journal on Smart Sensing and Intelligent Systems, vol. 5, no. 1, pp. 36-56, 2012.10.21307/ijssis-2017-469 Search in Google Scholar

[15]Jon Barth, Koen Verhaege, Leo G. Henry, John Richner, “TLP Calibration, Correlation, Standards and New Techniques”, in 22nd EOS/ESD Symposium, 2000, pp. 85-96. Search in Google Scholar

[16]D. Bonfert, H. Wolf, H. Gieser, P. Svasta, A. Romanescu, E. Cazacu, “Transmission Line Pulse Stress on Thick Film Resistors”, in 30th International Spring Seminar on Electronics Technology, 2007, pp. 70-75.10.1109/ISSE.2007.4432823 Search in Google Scholar

[17]D. Linten, S. Thijs, A. Griffoni, M. Scholz, S.-H. Chen, D. Lafonteese, V. Vashchenko, M. Sawada, A. Concannon, P. Hopper, P. Jansen and G. Groeseneken, “HBM parameter extraction and transient safe operating area”, in 32nd EOS/ESD Symposium, 2010, pp. 1-8. Search in Google Scholar

[18]A.P. Herlambang, Gene Sheu, Shao-Ming Yang, P.T. Sulistyanto, Shang-Hui Tu, Jin-Shyong Jan, Yeh-Ning Jou, Chia-Wei Hung, “ESD simulation on GGnMOS for 40V BCD”, in IEEE Region 10 Conference (TENCON), 2010, pp. 80-83.10.1109/TENCON.2010.5685874 Search in Google Scholar

[19]Shen-Li Chen and Guan-Jhong Chen, “Evaluating nMOSFET ESD Protection Designs: An Overview”, Applied Mechanics and Materials, vols. 268-270, pp. 1357-1360, 2013. Search in Google Scholar

[20]Ming-Dou Ker, “Whole-Chip ESD Protection Design with Efficient Vdd-to-Vss ESD Clamp Circuits for Submicron CMOS VLSI”, IEEE Transaction on Electron Devices, vol. 46, no. 1, pp. 173-183, 1999.10.1109/16.737457 Search in Google Scholar

[21]Jen-Chou Tseng, Chung-Ti Hsu, Chia-Ku Tsai, Yu-Ching Liao, Ming-Dou Ker, “ ESD Protection Design for Low Trigger Voltage and High Latch-up Immunity”, in 17th IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA), 2010, pp. 1-4.10.1109/IPFA.2010.5532307 Search in Google Scholar

[22]Ming-Dou Ker, Wei-Jen Chang, Chang-Tzu Wang, Wen-Yi Chen, “ESD Protection for Mixed-Voltage I/O in Low Voltage Thin-Oxide CMOS”, in IEEE International Solid-State Circuits Conference, 2006, pp. 2230-2237.10.1109/ISSCC.2006.1696284 Search in Google Scholar

[23]Hang Fan, Lingli Jiang, Bo Zhang, “A Simple and Effective ESD Protection Structure for High-voltage-tolerant I/O pad”, in International Conference on Communications, Circuits and Systems, 2010, pp. 605-608.10.1109/ICCCAS.2010.5581922 Search in Google Scholar

[24]H. Jin, S.R. Dong, M. Miao, J. Wu, F. Ma, J.K. Luo, J.J. Liou, “Whole chip ESD protection for 2.4 GHz LNA”, in International Conference of Electron Devices and Solid-State Circuits, 2011, pp. 1-2.10.1109/EDSSC.2011.6117571 Search in Google Scholar