This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Chesson, E. Jr., & Munse, W. H. (1963). Riveted and Bolted Joints: Truss-Type Tensile Connections. J. Struct. Div., 89(1), 67–106.ChessonE.Jr.MunseW. H.1963Riveted and Bolted Joints: Truss-Type Tensile Connections8916710610.1061/JSDEAG.0000891Search in Google Scholar
McCormac, M. C., & Csernak, S. F. (2012). Structural steel design. New Jersey: Prentice Hall.McCormacM. C.CsernakS. F.2012New JerseyPrentice HallSearch in Google Scholar
Subramanian, N. (2010). Steel Structures. Design and practice. New Delhi: Oxford University Press.SubramanianN.2010New DelhiOxford University PressSearch in Google Scholar
Büttner, O., & Stenker, H. (1975). Light metal constructions. Warsaw: Arkady. (in Polish)BüttnerO.StenkerH.1975WarsawArkadyin PolishSearch in Google Scholar
Space structures (1985). edited by Bródka, J. Arkady: Warsaw. (in Polish)1985edited byBródkaJ.ArkadyWarsawin PolishSearch in Google Scholar
Chilton, J. (2000). Space grid structures. Oxford: Architectural Press.ChiltonJ.2000OxfordArchitectural PressSearch in Google Scholar
Porto, C. E. (2014). The innovative structural conception in Stéphane du Château’s work: from metallic trusses to the development of spatial frames. Architectus 4, 51–64.PortoC. E.2014The innovative structural conception in Stéphane du Château’s work: from metallic trusses to the development of spatial frames45164Search in Google Scholar
Kowal, Z. (2011). The formation of space bar structures supported by the system reliability theory. Arch. Civ. Mech. Eng. 11(1), 115–133.KowalZ.2011The formation of space bar structures supported by the system reliability theory11111513310.1016/S1644-9665(12)60178-2Search in Google Scholar
Kowal, Z., Piotrowski, R., & Szychowski, A. (2012). Adaptation of halls with roof covering to solar radiation energy extraction. Zeszyty Naukowe Politechniki Rzeszowskiej, 283, 59(2/2012/II), 431–438 (in Polish).KowalZ.PiotrowskiR.SzychowskiA.2012Adaptation of halls with roof covering to solar radiation energy extraction283592/2012/II431438in PolishSearch in Google Scholar
Kowal, Z., Siedlecka, M., Piotrowski, R., Brzezińska, K., Otwinowska, K., & Szychowski, A. (2015). Shapes of energy-active segments of steel buildings. Arch. Civ. Eng., 61(3), 119–132.KowalZ.SiedleckaM.PiotrowskiR.BrzezińskaK.OtwinowskaK.SzychowskiA.2015Shapes of energy-active segments of steel buildings61311913210.1515/ace-2015-0029Search in Google Scholar
Kubicka, K., Radoń, U., Szaniec, W., & Pawlak, U. (2017). Comparative Analysis of the Reliability of Steel Structure with Pinned and Rigid Nodes Subjected to Fire. IOP Conf. Ser.: Mater. Sci. Eng. 245, 022051 1–9.KubickaK.RadońU.SzaniecW.PawlakU.2017Comparative Analysis of the Reliability of Steel Structure with Pinned and Rigid Nodes Subjected to Fire2450220511910.1088/1757-899X/245/2/022051Search in Google Scholar
Timoshenko, S. P. (1966). History of strength of materials. Warsaw: Arkady (in Polish).TimoshenkoS. P.1966WarsawArkadyin PolishSearch in Google Scholar
Engesser, F. (1889). Über Knickfestigkeitgerader Stäbe. Zeitschriftfür Architekten und Ingenieurwesen, 35(4), 455–462.EngesserF.1889Über Knickfestigkeitgerader Stäbe354455462Search in Google Scholar
Haringx, J. A. (1949). Elastic stability of helical springs at a compression larger than original length. Appl. Sci. Res., 1(1), 417–434.HaringxJ. A.1949Elastic stability of helical springs at a compression larger than original length1141743410.1007/BF02120345Search in Google Scholar
Bleich, F. (1952). Buckling strength of metal structures. New York: Mc Graw-Hill.BleichF.1952New YorkMc Graw-HillSearch in Google Scholar
Timoshenko, S. P., & Gere, J. M. (1963). Theory of elastic stability. Warsaw: Arkady (in Polish).TimoshenkoS. P.GereJ. M.1963WarsawArkadyin PolishSearch in Google Scholar
Kowal, Z. (2001). About the critical load bearing capacity of battened columns. Inżynieria i Budownictwo, 10, 580–582 (in Polish).KowalZ.2001About the critical load bearing capacity of battened columns10580582in PolishSearch in Google Scholar
Bažant, Z. P. (2003). Shear Buckling of Sandwich, Fiber Composite and Lattice Columns, Bearings, and Helical Springs: Paradox Resolved. J. Appl. Mech., 70, 75–83.BažantZ. P.2003Shear Buckling of Sandwich, Fiber Composite and Lattice Columns, Bearings, and Helical Springs: Paradox Resolved70758310.1115/1.1509486Search in Google Scholar
Aslani, F., & Goel, S. C. (1991). An Analytical Criterion for Buckling Strength of Built-up Compression Members. Eng. J., 28(4), 159–168.AslaniF.GoelS. C.1991An Analytical Criterion for Buckling Strength of Built-up Compression Members284159168Search in Google Scholar
AISC LRFD: 1994. Load and resistance factor design, American Institute of Steel Construction (AISC), Chicago.AISC LRFD1994American Institute of Steel Construction (AISC)ChicagoSearch in Google Scholar
Temple, M. C., & El-Mahdy, G. M. (1993). Buckling of built-up compression members in the plane of the connectors. Can. J. Civ. Eng., 20, 895–909.TempleM. C.El-MahdyG. M.1993Buckling of built-up compression members in the plane of the connectors2089590910.1139/l93-122Search in Google Scholar
Temple, M. C., & El-Mahdy, G. M. (1995). Local effective length factor in the equivalent slenderness ratio. Can. J. Civ. Eng., 22, 1164–1170.TempleM. C.El-MahdyG. M.1995Local effective length factor in the equivalent slenderness ratio221164117010.1139/l95-134Search in Google Scholar
Lue, D. M., Yen, T., & Liu, J. L. (2006). Experimental Investigation on Built-up Columns. J. Constr. Steel Res., 62, 1325–1332.LueD. M.YenT.LiuJ. L.2006Experimental Investigation on Built-up Columns621325133210.1016/j.jcsr.2006.02.004Search in Google Scholar
Liu, J. L., Lue, D. M., & Lin, Ch. H. (2009). Investigation on Slenderness Ratios of Built-up Compression Members. J. Constr. Steel Res., 65, 237–248.LiuJ. L.LueD. M.LinCh. H.2009Investigation on Slenderness Ratios of Built-up Compression Members6523724810.1016/j.jcsr.2008.02.012Search in Google Scholar
AISC-LRFD:2005. Load and resistance factor design. Specification for structural steel buildings. American Institute of Steel Construction: Chicago.AISC-LRFD2005American Institute of Steel ConstructionChicagoSearch in Google Scholar
AS-4100:1998. Steel structures. Standards Association of Australia, Homebush, Australia, 1998.AS-41001998Standards Association of AustraliaHomebush, Australia1998Search in Google Scholar
CSA S16-01:2001. Limit states design of steel structures. Canadian Standards Association, Toronto.CSA S16-012001Canadian Standards AssociationTorontoSearch in Google Scholar
Abejide, O. S., & Masce, P. E. (2007). Evaluation of Effective Lengths of Braced Double Angle Diagonals. Res. J. Appl. Sci, 2(10), 1060–1065.AbejideO. S.MasceP. E.2007Evaluation of Effective Lengths of Braced Double Angle Diagonals21010601065Search in Google Scholar
CEN: 2003. Eurocode 3: Design of Steel Structures. Part 1-1: General Rules and Rules for Buildings. European Committee for Standardization.CEN2003European Committee for StandardizationSearch in Google Scholar
AISC: 1999. Load and resistance factor design. Specification for structural steel buildings. American Institute of Steel Construction, Chicago.AISC1999American Institute of Steel ConstructionChicagoSearch in Google Scholar
BS5950: 2000. Structural Use of Steelwork in Buildings. British Standards Institution, London.BS59502000British Standards InstitutionLondonSearch in Google Scholar
Stone, T. A., & La Boube, R. A. (2005). Behavior of cold-formed steel built-up I-sections. Thin-Walled Struct., 43, 1805–1817.StoneT. A.La BoubeR. A.2005Behavior of cold-formed steel built-up I-sections431805181710.1016/j.tws.2005.09.001Search in Google Scholar
Ting, T. C. H., & Lau, H. H. (2011) Compression Test on Cold-formed Steel Built-up Back-to-back Channels Stub Columns. Adv. Mater. Res., 201–203: 2900–2903.TingT. C. H.LauH. H.2011Compression Test on Cold-formed Steel Built-up Back-to-back Channels Stub Columns201–2032900290310.4028/www.scientific.net/AMR.201-203.2900Search in Google Scholar
Anbarasu, M., Kanagarasu, K., & Sukumar, S. (2015). Investigation on the behaviour and strength of cold-formed steel web stiffened built-up battened columns. Mater. and Struct., 48, 4029–4038.AnbarasuM.KanagarasuK.SukumarS.2015Investigation on the behaviour and strength of cold-formed steel web stiffened built-up battened columns484029403810.1617/s11527-014-0463-8Search in Google Scholar
Zhang, J.-H., & Young, B. (2015). Numerical investigation and design of cold-formed steel built-up open section columns with longitudinal stiffeners. Thin-Walled Struct., 89, 178–191.ZhangJ.-H.YoungB.2015Numerical investigation and design of cold-formed steel built-up open section columns with longitudinal stiffeners8917819110.1016/j.tws.2014.12.011Search in Google Scholar
Tamai, H., Yamanishi, T., Takamatsu, T. & Matsuo, A. (2011). Experimental study on lateral buckling behavior of weld-free built-up member made of H-SA700A high-strength steel. J. Struct. Constr. Eng. 2, 407–415.TamaiH.YamanishiT.TakamatsuT.MatsuoA.2011Experimental study on lateral buckling behavior of weld-free built-up member made of H-SA700A high-strength steel240741510.3130/aijs.76.407Search in Google Scholar
Słowiński, K., & Wuwer, W. (2016). Blind-bolted shear connections for axially compressed RHS columns strengthened with open sections. J. Constr. Steel Res. 127, 15–27.SłowińskiK.WuwerW.2016Blind-bolted shear connections for axially compressed RHS columns strengthened with open sections127152710.1016/j.jcsr.2016.07.023Search in Google Scholar
Słowiński, K., & Wuwer, W. (2016). Technology of reinforcing of compressed steel bars with closed and open cross-sections. Fastener: rynek elementów złącznych, 1, 43–47.SłowińskiK.WuwerW.2016Technology of reinforcing of compressed steel bars with closed and open cross-sections14347Search in Google Scholar
Deniziak, P., & Winkelmann, K. (2018). TS-based RSM-aided design of cold-formed steel stiffened C-sectional columns susceptible to buckling, Shell Struct.: Theory and Applications, 4, 533–536.DeniziakP.WinkelmannK.2018TS-based RSM-aided design of cold-formed steel stiffened C-sectional columns susceptible to buckling453353610.1201/9781315166605-123Search in Google Scholar
Deniziak, P., & Winkelmann, K. (2018). Influence of nonlinearities on the efficiency and accuracy of FEM calculations on the example of a steel build-up thin-walled column. MATEC Web of Conferences, 219, 02010 1–8.DeniziakP.WinkelmannK.2018Influence of nonlinearities on the efficiency and accuracy of FEM calculations on the example of a steel build-up thin-walled column219020101810.1051/matecconf/201821902010Search in Google Scholar
PN-EN 1993-1-1:2006 Eurocode 3: Design of steel structures – Part 1-1: General rules and rules for buildings. The Polish Committee for Standardization, Warsaw.PN-EN 1993-1-12006The Polish Committee for StandardizationWarsawSearch in Google Scholar
Kowal, Z., & Siedlecka, M. (2017). Load bearing capacity of compressed closely spaced built-up members in space structures. JCEEA, 34, 64(3/I/17), 407–416.KowalZ.SiedleckaM.2017Load bearing capacity of compressed closely spaced built-up members in space structures34643/I/17407416Search in Google Scholar
ABAQUS 6.14. PDF Documentation. Abaqus Analysis User’s Guide, Simulia, Dassault Systèmes, 2014.ABAQUS 6.14. PDF Documentation2014Search in Google Scholar
ABAQUS 6.14. PDF Documentation. Abaqus/CAE User’s Guide, Simulia, Dassault Systèmes, 2014.ABAQUS 6.14. PDF Documentation2014Search in Google Scholar
ABAQUS 6.14. PDF Documentation. Abaqus Theory Guide, Simulia, Dassault Systèmes 2014.ABAQUS 6.14. PDF Documentation2014Search in Google Scholar