<abstract xmlns="http://www.w3.org/1999/xhtml">

In the study, the results of statistical investigations into random strength parameters of steel used to manufacture corrugated webs of SIN plate girders were discussed. The investigations were conducted on samples randomly collected from twenty SIN girders. The corrugated web of the girders was 2, 2.5 and 3 mm in thickness. The girders had been examined before statistical investigations were conducted. Based on the analysis, coefficients of variation of yield strength <italic>V</italic>
Re=<italic>D</italic>(<italic>R</italic>
e)/<italic>E</italic>(<italic>R</italic>
e) and partial factors of yield strength γ<italic>m</italic> were identified. The results were compared with factors γ<italic>m</italic> obtained from investigations into thin flat sheets [<xref ref-type="bibr" rid="j_acee-2018-039_ref_010">10</xref>]. The impact of yield strength and random cross-sectional area of folded web on the quantile of girder web resistance was shown. Taking into account random character of yield strength and web thickness offers a sensible approach to SIN girder design and computations.
</abstract>

In the study, the results of statistical investigations into random strength parameters of steel used to manufacture corrugated webs of SIN plate girders were discussed. The investigations were conducted on samples randomly collected from twenty SIN girders. The corrugated web of the girders was 2, 2.5 and 3 mm in thickness. The girders had been examined before statistical investigations were conducted. Based on the analysis, coefficients of variation of yield strength V
Re=D(R
e)/E(R
e) and partial factors of yield strength γm were identified. The results were compared with factors γm obtained from investigations into thin flat sheets [10]. The impact of yield strength and random cross-sectional area of folded web on the quantile of girder web resistance was shown. Taking into account random character of yield strength and web thickness offers a sensible approach to SIN girder design and computations.

Random Strength Parameters of Steel Corrugated Webs and Their Influence on the Resistance of Sin Plate Girders

Architecture, Civil Engineering, Environment

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

In the study, the results of statistical investigations into random strength parameters of steel used to manufacture corrugated webs of SIN plate girders were...

Random Strength Parameters of Steel Corrugated Webs and Their Influence on the Resistance of Sin Plate Girders

Publicado en línea: 04 abr 2019

Páginas: 65 - 77

Recibido: 28 sept 2017

Aceptado: 09 may 2018

DOI: https://doi.org/10.21307/acee-2018-039

Palabras clave
Corrugated web, Coefficients of variation, Normal distribution

© 2018 Witold Basiński et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Random Strength Parameters of Steel Corrugated Webs and Their Influence on the Resistance of Sin Plate Girders

Publicado en línea: 04 abr 2019

Páginas: 65 - 77

Recibido: 28 sept 2017

Aceptado: 09 may 2018

DOI: https://doi.org/10.21307/acee-2018-039

Palabras claveCorrugated web, Coefficients of variation, Normal distribution

© 2018 Witold Basiński et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palabras clave
Corrugated web, Coefficients of variation, Normal distribution