[1. Łopata, S. & Ocłoń, P. (2012). Modelling and optimizing operating conditions of heat exchanger with finned elliptical tubes. In L. Hector Juarez (Ed.), Fluid dynamics, computational modeling and applications (pp. 327–356). Rijeka, Croatia: InTech.]Search in Google Scholar
[2. Ocłoń, P., Łopata, St., Nowak, M. & Benim, A. (2014). Numerical study on the effect of inner tube fouling on the thermal performance of high-temperature fin-and-tube heat exchanger. Prog. Comput. Fluid Dyn. 15(5), 290. DOI: 10.1504/PCFD.2015.072014.10.1504/PCFD.2015.072014]Open DOISearch in Google Scholar
[3. Brauer, H., Dyląg, M. & Talaga, J. (1989). Zur fluiddynamik von gerührten gas/feststoff/fltssigkeits-systemen. Chem. Ing. Tech. 61, 978–979 (in German).10.1002/cite.330611218]Open DOISearch in Google Scholar
[4. Brauer, H., Dyląg, M. & Talaga, J. (1996). Modellvorstellung zur entstehung der vollständigen suspension im rühbehälter. Forsch. Ingenieurwes 62, 239–245 (in German).]Search in Google Scholar
[5. Dyląg, M. & Talaga, J. (1995). Modeling of multiphase flows. Chem. Process Eng. 16(3), 407–420.]Search in Google Scholar
[6. Kabsch, M. (1976). Methods of dust wettability measurements. Wrocław, Poland: Wroclaw University of Technology Publisher (in Polish).]Search in Google Scholar
[7. Nazarow, G., Krawczyk J., Blinicziew, W., Czagin, O. (2000). Influence of the design of the dust collecting apparatus on the limiting concentration of the irrigating suspension. Himia Himic. Tehnol. 43(2), 80–85 (in Russian).]Search in Google Scholar
[8. Krawczyk, J. (2015). Development of wet methods of industrial gasses dedustind on the basis of experimental investigations. Cracow, Poland: Cacow University of Technology Publisher (in Polish).]Search in Google Scholar
[9. Krawczyk J., Dyląg, M. & Rosiński, J. (1998). Vermin-derung des wasserverbrauchs bei der entstaubung. Gefahrst. Reinhalt. L. 59(1), 45–49.]Search in Google Scholar
[10. Byeon, S.H., Lee, B.K. & Mohan, B.R. (2012). Removal of ammonia and particulate matter using a modified turbulent wet scrubbing system. Sep. Purif. Technol. 98, 221–229. DOI: 10.1016/j.seppur.2012.07.014.10.1016/j.seppur.2012.07.014]Search in Google Scholar
[11. Mohan, Jain, R. & Meikap, B. (2008). Comprehensive analysis for prediction of dust removal efficiency using twin-fluid atomization in a spray scrubber. Sep. Purif. Technol. 63 (2), 269–277. DOI: 10.1016/j.seppur.2008.05.006.10.1016/j.seppur.2008.05.006]Open DOISearch in Google Scholar
[12. Kim, H., Jung, C., Oh, S. & Lee K. (2001). Particle removal efficiency of gravitational wet scrubber considering diffusion, interception and impaction. Environ. Eng. Sci. 18 (2), 125–136. DOI: 10.1089/10928750151132357.10.1089/10928750151132357]Open DOISearch in Google Scholar
[13. Lim, K., Lee, S. & Park, H. (2006). Prediction for particle removal efficiency of a reverse jet scrubber. J. Aerosol. Sci. 37 (12), 1826–1839. DOI: 10.1016/j.jaerosci.2006.06.010.10.1016/j.jaerosci.2006.06.010]Open DOISearch in Google Scholar
[14. Mohan, B., Biswas, S. & Meikap, B. (2008). Performance characteristics of the particulates scrubbing in a counter-current spray-column. Sep. Purif. Technol. 61(1), 96–102. DOI: 10.1016/j.seppur.2007.09.018.10.1016/j.seppur.2007.09.018]Open DOISearch in Google Scholar
[15. Meikap, B. & Biswas, M. (2004). Fly-ash removal efficiency in a modified multi-stage bubble column scrubber. Sep. Purif. Technol. 36(3), 177–190. DOI: 10.1016/S1383-5866(03)00213-2.10.1016/S1383-5866(03)00213-2]Open DOISearch in Google Scholar
[16. Ebert, F. & Büttner, H. (1996). Recent investigations with nozzle scrubbers. Powder Technol. 86(1), 31–36. DOI: 10.1016/0032-5910(95)03034-4.10.1016/0032-5910(95)03034-4]Open DOISearch in Google Scholar
[17. Gemci, T. & Ebert, F. (1992). Prediction of the particle capture efficiency based on the combined mechanisms (turbulent diffusion, inertial impaction, interception, and gravitation) by a 3-D simulation of a wet scrubber. J. Aerosol. Sci. 23, 769–772. DOI: 10.1016/0021-8502(92)90525-Z.10.1016/0021-8502(92)90525-Z]Open DOISearch in Google Scholar
[18. Park, S., Jung, C., Jung, K., Lee, B. & Lee, K. (2005). Wet scrubbing of polydisperse aerosols by freely falling droplets. J. Aerosol. Sci. 36, 1444–1458. DOI: 10.1016/j.jaerosci.2005.03.012.10.1016/j.jaerosci.2005.03.012]Open DOISearch in Google Scholar
[19. Wang, Q., Chen, X. & Gong, X. (2013). The particle removing characteristics in a fixed valve tray column. Ind. Eng. Chem. Res. 52(9), 3441–3452. DOI: 10.1021/ie3027422.10.1021/ie3027422]Open DOISearch in Google Scholar
[20. Krawczyk, J. (1996). Wet dedusting, heat and mass exchange in apparatuses of intense performance. Moscow, Russia: Russian National Academy Publisher.]Search in Google Scholar
[21. Talaga, J., Brauer, H. & Dyląg, M. (1996). Modellvorstellung zur entstehung der vollständigen suspension im rühbehälter. Forsch. Ingenieurwes 62(9), 239–246. DOI: 10.1007/BF02601430.10.1007/BF02601430]Open DOISearch in Google Scholar
[22. Löffler, F. (1988). Staubabscheiden. New York, USA: Georg Thieme Verlag.]Search in Google Scholar
[23. Krawczyk, J., Czagin, O. & Postnikowa, I. (2010). The change of fractional dedusting efficiency with increase of liquid concentration for different wettability dusts. In proceedings of IX International Conference “Theoretical Basics of Energy and Resource-saving Processes, Equipment and Environmentally Safe Industries”, 28–30 September 2010 (pp. 121–128). Ivanovo, Russia: Ivanovo Stte University of Chemistry and Technology Publisher (in Polish).]Search in Google Scholar
[24. Krawczyk, J. & Pikoń, J. (1986). Abscheider mit zellen-ftllkorpern. Staub. Reinhalt. Luft 1, 22–25 (in German).]Search in Google Scholar
[25. Dłuska, E., Hubacz, R., Wroński, S., Kamieński, J., Dyląg, M. & Wójtowicz, R. (2007). The influence of helical flow on water fuel emulsion preparation. Chem. Eng. Commun. 194 (10), 1271–1286. DOI: 10.1080/00986440701293959.10.1080/00986440701293959]Search in Google Scholar
[26. Krawczyk, J., Roszak, Z. & Wisła H. (2006) Dedusting in bubbling and drop zones of periodic apparatus. Chem. Enginee. Equip. 45(37), 99–101 (in Polish).]Search in Google Scholar
[27. Wisła, H. (2009). Wet dedusting for full liquid recirculation. Doctoral dissertation, Cracow University of Technology, Cracow, Poland (in Polish).]Search in Google Scholar
[28. Krawczyk, J., Maszek, L., Mieszkowski, A. & Roszak, Z. (2008). Wet dust extraction in the condition of total liquid recirculation. Czasopismo Techniczne – Technical Transactions 2-M/2008 (2), 143–154 (in Polish).]Search in Google Scholar
[29. Krawczyk, J., Czagin, O. & Postnikowa, I. (2012). Changes in the dust capture during the impact aerosol of the liquid surface. Czasopismo Techniczne – Technical Transactions 2-M/2012 (6), 207–214 (in Polish).]Search in Google Scholar
[30. Szatko, W., Blinicziew, W. & Krawczyk, J. (2011). Comparison of mathematical models describing changes of the suspension absorption capacity and thermal resistance of the sludge. In G. Wozny & Ł. Hady (Eds.), Process Engineering and Chemical Plant Design 2011, (pp. 103–113). Berlin: Universitätsverlag der TU Berlin.]Search in Google Scholar
[31. Wójtowicz, R., Lipin, A.A. & Talaga, J. (2014). On the possibility of using of different turbulence models for modeling flow hydrodynamics and power consumption in mixing vessels with turbine impellers. Theor. Found. Chem. Eng. 48 (4), 360–375. DOI: 10.1134/S0040579514020146.10.1134/S0040579514020146]Open DOISearch in Google Scholar
[32. Kamieński, J. & Wójtowicz, R. (2001). Drop size during dispersion of two immiscible liquids in a vibromixer. Chem. Process Eng. 22(3C), 597–602 (in Polish).]Search in Google Scholar
[33. Wójtowicz, R. (2014). Choice of an optimal agitated vessel for the drawdown of floating solids. Ind. Eng. Chem. Res. 53 (36), 13989–14001. DOI: 10.1021/ie500604q, 53 13989–14001.10.1021/ie500604q,531398914001]Open DOISearch in Google Scholar