<abstract xmlns="http://www.w3.org/1999/xhtml"><p>X-ray computed tomography (CT) is increasingly recognized as a promising measuring technique for dimensional metrology. Various methods are being developed to improve measurement accuracy. Tests of new methods for such applications include accuracy evaluation with the use of calibrated workpieces; however, the internal algorithms of image acquisition and data processing might influence the experimental error, and then also the comparison of methods at different CTs. The accuracy of the results of tomographic measurements is influenced by many factors, one of which is the setting of the threshold value. The article presents the results of an attempt to use Monte Carlo simulated images to estimate deviations to determine threshold values to improve measurement accuracy and additionally, to estimate the impact of data processing. The differences of the results obtained from the simulated images were up to 4 % larger than those from tomographic images. It was caused by degradation of the image contrast by scattered radiation.</p></abstract>

X-ray computed tomography (CT) is increasingly recognized as a promising measuring technique for dimensional metrology. Various methods are being developed to improve measurement accuracy. Tests of new methods for such applications include accuracy evaluation with the use of calibrated workpieces; however, the internal algorithms of image acquisition and data processing might influence the experimental error, and then also the comparison of methods at different CTs. The accuracy of the results of tomographic measurements is influenced by many factors, one of which is the setting of the threshold value. The article presents the results of an attempt to use Monte Carlo simulated images to estimate deviations to determine threshold values to improve measurement accuracy and additionally, to estimate the impact of data processing. The differences of the results obtained from the simulated images were up to 4 % larger than those from tomographic images. It was caused by degradation of the image contrast by scattered radiation.

Proposed Use of Monte Carlo Simulated Images to Evaluate the Accuracy of Measurements on X-Ray Computed Tomography

Institute of Metrology and Biomedical Engineering, Faculty of Mechatronics

Measurement Science Review

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

X-ray computed tomography (CT) is increasingly recognized as a promising measuring technique for dimensional metrology. Various methods are being developed to...

Proposed Use of Monte Carlo Simulated Images to Evaluate the Accuracy of Measurements on X-Ray Computed Tomography

Publicado en línea: 30 nov 2018

Páginas: 251 - 255

Recibido: 08 may 2018

Aceptado: 03 nov 2018

DOI: https://doi.org/10.1515/msr-2018-0034

Palabras clave
Monte Carlo Methods, X-ray computed tomography, accuracy of measurements, threshold values

© 2018 Tomasz Kowaluk et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Proposed Use of Monte Carlo Simulated Images to Evaluate the Accuracy of Measurements on X-Ray Computed Tomography

Publicado en línea: 30 nov 2018

Páginas: 251 - 255

Recibido: 08 may 2018

Aceptado: 03 nov 2018

DOI: https://doi.org/10.1515/msr-2018-0034

Palabras claveMonte Carlo Methods, X-ray computed tomography, accuracy of measurements, threshold values

© 2018 Tomasz Kowaluk et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Palabras clave
Monte Carlo Methods, X-ray computed tomography, accuracy of measurements, threshold values