<abstract xmlns="http://www.w3.org/1999/xhtml"> Background: In external radiotherapy, the delivered dose is calculated from the treatment planning system. Various types of software have been used to verify the patient dose distribution.Objective: Develop the in-house software (ISOFT) to calculate dose in intensity-modulated radiotherapy (IMRT) based on lung CT-patient data by combining the modified Clarkson integration with 3D-beam subtraction method.Materials and methods: An ISOFT was developed for 6MV X-rays Varian Clinac21EX linear accelerator and the CT-based patient data. The multileaf collimators (MLCs) file from the Varian Eclipse treatment planning was transferred to the ISOFT. The ISOFT was used to calculate the dose distribution with correction of tissue inhomogeneity. To test the accuracy of the ISOFT, the normal MLC-shaped fields and IMRT plans were measured in a water phantom and in a thorax phantom, respectively. Then, these measurements were compared with the doses calculated from the ISOFT and the Varian Eclipse treatment planning system.Results: The deviation between the measurements and calculations by the ISOFT for MLC-shaped fields in the water phantom fell within 0.5%. There were mostly higher calculated doses in lung compared with the measured result in the thorax phantom. The overestimated doses due to loss of scattering in the low-density materials were considered less in all methods of calculation. The measured lung dose difference from the ISOFT was within 5% criterion of acceptability.Conclusion: The ISOFT can be used conveniently to verify dose calculation in heterogeneous media.</abstract>

Background: In external radiotherapy, the delivered dose is calculated from the treatment planning system. Various types of software have been used to verify the patient dose distribution.Objective: Develop the in-house software (ISOFT) to calculate dose in intensity-modulated radiotherapy (IMRT) based on lung CT-patient data by combining the modified Clarkson integration with 3D-beam subtraction method.Materials and methods: An ISOFT was developed for 6MV X-rays Varian Clinac21EX linear accelerator and the CT-based patient data. The multileaf collimators (MLCs) file from the Varian Eclipse treatment planning was transferred to the ISOFT. The ISOFT was used to calculate the dose distribution with correction of tissue inhomogeneity. To test the accuracy of the ISOFT, the normal MLC-shaped fields and IMRT plans were measured in a water phantom and in a thorax phantom, respectively. Then, these measurements were compared with the doses calculated from the ISOFT and the Varian Eclipse treatment planning system.Results: The deviation between the measurements and calculations by the ISOFT for MLC-shaped fields in the water phantom fell within 0.5%. There were mostly higher calculated doses in lung compared with the measured result in the thorax phantom. The overestimated doses due to loss of scattering in the low-density materials were considered less in all methods of calculation. The measured lung dose difference from the ISOFT was within 5% criterion of acceptability.Conclusion: The ISOFT can be used conveniently to verify dose calculation in heterogeneous media.

Development of in-house software to calculate dose for intensity-modulated radiation therapy based on lung CT-patient data

Department of Nuclear Technology, Faculty of Engineering, Chulalongkorn University, Bangkok 10330,

Department of Radiology, Faculty of Medicine, Chulalongkon University, Bangkok 10330,

Department of Radiology, Faculty of Medicine, Ramathibodi Hospital, Mahidol University, Bangkok 10400,

Asian Biomedicine

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Background: In external radiotherapy, the delivered dose is calculated from the treatment planning system. Various types of software have been used to verify...

Development of in-house software to calculate dose for intensity-modulated radiation therapy based on lung CT-patient data

Article Category: Technical report

Online veröffentlicht: 04. Feb. 2017

Seitenbereich: 693 - 698

DOI: https://doi.org/10.5372/1905-7415.0505.091

Schlüsselwörter
Clarkson’s method, inhomogeneity correction, irregular field, multi-leaf collimators, 3D-beam subtraction method

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Development of in-house software to calculate dose for intensity-modulated radiation therapy based on lung CT-patient data

Article Category: Technical report

Online veröffentlicht: 04. Feb. 2017

Seitenbereich: 693 - 698

DOI: https://doi.org/10.5372/1905-7415.0505.091

SchlüsselwörterClarkson’s method, inhomogeneity correction, irregular field, multi-leaf collimators, 3D-beam subtraction method

© 2017

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Schlüsselwörter
Clarkson’s method, inhomogeneity correction, irregular field, multi-leaf collimators, 3D-beam subtraction method