<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This study is aimed at evaluating the strength of stabilised soil collected from the Port of Norvik, Stockholm, Sweden, where 350,000 m3 of clay had to be stabilized. The tests were performed in the laboratory of the Swedish Geotechnical Institute (SGI). The soil was stabilised by binder mixtures using Portland cement clinker (PCC) and lime and lime kiln dust (LKD). Accelerators (X-seed 100 BASF, PCC, LKD and salt) were added to the soil samples for quicker stabilization. The strength of the stabilised soil was assessed using resonance frequency measurements of seismic P-waves by an ICP accelerometer in order to estimate the shear strength of the soil and to evaluate the effects from the accelerators, binder ratios, and the curing temperature on the gains in stabilization and strength. Various proportions of the binders were tested, i.e.: 50/50 cement/lime and 50/50 PCC/lime. The temperature was measured using a calorimeter in double experiments. The results showed that the accelerators improve the strength in the stabilized specimens and enhance the soil performance for engineering construction work.</p>
</abstract>

This study is aimed at evaluating the strength of stabilised soil collected from the Port of Norvik, Stockholm, Sweden, where 350,000 m3 of clay had to be stabilized. The tests were performed in the laboratory of the Swedish Geotechnical Institute (SGI). The soil was stabilised by binder mixtures using Portland cement clinker (PCC) and lime and lime kiln dust (LKD). Accelerators (X-seed 100 BASF, PCC, LKD and salt) were added to the soil samples for quicker stabilization. The strength of the stabilised soil was assessed using resonance frequency measurements of seismic P-waves by an ICP accelerometer in order to estimate the shear strength of the soil and to evaluate the effects from the accelerators, binder ratios, and the curing temperature on the gains in stabilization and strength. Various proportions of the binders were tested, i.e.: 50/50 cement/lime and 50/50 PCC/lime. The temperature was measured using a calorimeter in double experiments. The results showed that the accelerators improve the strength in the stabilized specimens and enhance the soil performance for engineering construction work.

Hardening Accelerators (X-Seed 100 BASF, PCC, LKD and SALT) as Strength-Enhancing Admixture Solutions for Soil Stabilization

Department of Investments, Technology & Environment, Swedish Transport Administration

Laboratory of Image Synthesis and Analysis, École polytechnique de Bruxelles (Brussels Faculty of Engineering)

Slovak Journal of Civil Engineering

This work is licensed under the Creative Commons Attribution 4.0 International License.

This study is aimed at evaluating the strength of stabilised soil collected from the Port of Norvik, Stockholm, Sweden, where 350,000 m3 of clay had to be...

Hardening Accelerators (X-Seed 100 BASF, PCC, LKD and SALT) as Strength-Enhancing Admixture Solutions for Soil Stabilization

Online veröffentlicht: 02. Apr. 2023

Seitenbereich: 10 - 21

DOI: https://doi.org/10.2478/sjce-2023-0002

Schlüsselwörter
Accelerator, X-seed 100, Lime kiln dust, Construction materials, Geotechnical engineering, Resonance frequency, P-waves, Structural mechanics, Engineering geology

© 2023 Per Lindh et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Hardening Accelerators (X-Seed 100 BASF, PCC, LKD and SALT) as Strength-Enhancing Admixture Solutions for Soil Stabilization

Online veröffentlicht: 02. Apr. 2023

Seitenbereich: 10 - 21

DOI: https://doi.org/10.2478/sjce-2023-0002

SchlüsselwörterAccelerator, X-seed 100, Lime kiln dust, Construction materials, Geotechnical engineering, Resonance frequency, P-waves, Structural mechanics, Engineering geology

© 2023 Per Lindh et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Schlüsselwörter
Accelerator, X-seed 100, Lime kiln dust, Construction materials, Geotechnical engineering, Resonance frequency, P-waves, Structural mechanics, Engineering geology