[1. Ang, D.T., Khong, Y.K. & Gan, S.N. (2014). Palm oil--based compound as environmentally friendly plasticizer for poly(vinyl chloride). J. Vinyl Addit. Technol. 22 (1), 80–87. DOI 10.1002/vnl.21434.10.1002/vnl.21434]Open DOISearch in Google Scholar
[2. Hsu, N.Y., Liu, Y.C., Lee, C.W. & Su, H.J. (2017). Higher moisture content is associated with greater emissions of DEHP from PVC wallpaper. Environ. Res. 152, 1–6. DOI: 10.1016/j.envres.2016.09.027.10.1016/j.envres.2016.09.027]Open DOISearch in Google Scholar
[3. Pyeon, H.B., Park, J.E. & Done, H.S.(2017). Non-phthalate plasticizer from camphor for flexible PVC with a wide range of available temperature. Polym. Test. 63. DOI 10.1016/j.polymertesting.2017.08.029.10.1016/j.polymertesting.2017.08.029]Open DOISearch in Google Scholar
[4. Zheng, X. & Gilbert, M. (2000). Impact strength of high density microcellular poly(vinyl chloride) foams. J. Vinyl Addit. Technol. 6(2), 93–99. DOI 10.1002/vnl.21408.10.1002/vnl.21408]Open DOISearch in Google Scholar
[5. Shi, G.X., Cooper, D.G. & Maric, M. (2011). Poly(E-caprolactone)-based ‘green’ plasticizers for poly(vinyl chloride). Polym. Degrad. Stabil. 96 (9), 1639–1647. DOI 10.1016/J.Polymdegradstab.2011.06.007.10.1016/J.Polymdegradstab.2011.06.007]Open DOISearch in Google Scholar
[6. Benaniba, M.T. & Massardier-Nageotte, V.(2010). Evaluation effects of biobased plasticizer on the thermal, mechanical, dynamical mechanical properties, and permanence of plasticized PVC. J. Appl. Polym. Sci. 118 (6), 3499–3508. DOI 10.1002/app.32713.10.1002/app.32713]Open DOISearch in Google Scholar
[7. Rahman, M. & Bazel, C.S. (2004). The plasticizer market: an assessment of traditional plasticizers and research trends to meet new challenges. Prog. Polym. Sci. 29 (12), 1223–1248. DOI: https://doi.org/10.1016/j.progpolymsci.2004.10.001.10.1016/j.progpolymsci.2004.10.001]Open DOISearch in Google Scholar
[8. Jia, P., Zhang, M., Hu, L., Wang, R., Sun, C. & Zhou, Y. (2017). Cardanol groups grafted on poly(vinyl chloride)-synthesis, performance and plasticization mechanism. Polymers, 9(11), 621. DOI: 10.3390/polym9110621.10.3390/polym9110621]Open DOISearch in Google Scholar
[9. Chen, J., Liu, Z., Li, X., Liu, P., Jiang, J. & Nie, X. (2016) Thermal behavior of epoxidized cardanol diethyl phosphate as novel renewable plasticizer for poly(vinyl chloride). Polym. Degrad. Stabil. 126, 58–64. https://doi.org/10.1016/j.polymdegradstab.2016.01.018.10.1016/j.polymdegradstab.2016.01.018]Open DOISearch in Google Scholar
[10. Chen, J., Wang, Y., Huang, J., Li, K. & Nie, X.(2018). Synthesis of tung-oil-based triglycidyl ester plasticizer and its effects on poly(vinyl chloride) soft films.ACS Sustainable Chem. Eng. 6(1), 642–651. DOI: 10.1021/acssuschemeng.7b02989.10.1021/acssuschemeng.7b02989]Search in Google Scholar
[11. Chen, J., Wang, Y., Huang, J., Li, K., Nie, X. & Jiang, J. (2017).Synthesis and properties of a novel environmental epoxidized glycidyl ester of ricinoleic acetic ester plasticizer for poly(vinyl chloride). Polymers. 9(12), 640. DOI: 10.3390/polym9120640.10.3390/polym9120640]Open DOISearch in Google Scholar
[12. Chen, J., Nie, X. & Jiang, J. (2018). Synthesis and application of a novel cardanol-based plasticizer as secondary or main plasticizer for poly(vinyl chloride). Polym. Int. 67(3), 269–275. DOI: https://doi.org/10.1002/pi.5503.10.1002/pi.5503]Open DOISearch in Google Scholar
[13. Jia, P., Hu, L., Shang, Q., Wang, R., Zhang, M. & Zhou, Y. (2017). Self-Plasticization of PVC materials via chemical modification of mannich base of cardanol butyl ether. ACS Sustain. Chem Eng. 5(8), 6665–6673. DOI: 10.1021/acssuschemeng.7b00900.10.1021/acssuschemeng.7b00900]Open DOISearch in Google Scholar
[14. Jia, P., Zhang, M., Liu, C., Hu, L., Feng, G., Bo, C. & Zhou, Y. (2015). Effect of chlorinated phosphate ester based on castor oil on thermal degradation of poly (vinyl chloride) blends and its flame retardant mechanism as secondary plasticizer. RSC Adv. 2015, 5, 41169–41178. DOI 10.1039/C5RA05784A.10.1039/505784]Open DOISearch in Google Scholar
[15. Chieng, B.W., Ibrahim, N.A., Then, Y.Y. & Loo, Y.Y. (2017). Epoxidized jatropha oil as a sustainable plasticizer to poly(lactic acid). Polymers. 9, 204–214. DOI: 10.3390/polym9060204.10.3390/polym9060204]Open DOISearch in Google Scholar
[16. Fenollar, O., Garcia-sanoguera, D., Sanchez-Nacher, L., Lopez, J. & Balart, R. (2013). Mechanical and thermal properties of polyvinyl chloride plasticized with natural fatty acid esters. Polymer-Plastics Technology and Engineering. 52, 751–767. https://doi.org/10.1080/03602559.2013.763352.10.1080/03602559.2013.763352]Open DOISearch in Google Scholar
[17. Jia,. P., Zhang, M., Hu, L. & Zhou, Y. (2016).A novel biobased polyester plasticizer prepared from palm oil and its plasticizing effect on poly (vinyl chloride). Pol. J. Chem. Technol. 18(1), 9–14. DOI: https://doi.org/10.1515/pjct-2016-0002.10.1515/pjct-2016-0002]Open DOISearch in Google Scholar
[18. Lee, S., Park, M.S., Shin, J. & Kim, Y.W. (2018). Effect of the individual and combined use of cardanol-based plasticizers and epoxidized soybean oil on the properties of PVC. Polym. Degrad. Stabil. DOI: 10.1016/j.polymdegradstab.2017.11.002.10.1016/j.polymdegradstab.2017.11.002]Open DOISearch in Google Scholar
[19. Chaudhary, B.I., Nguyen, B., Smith, P., Sunday, N. & Luong, M. (2015). Bis(2-ethylhexyl) succinate in mixtures with epoxidized soybean oil as bio-based plasticizers for poly(vinylchloride). Polym. Eng. Sci. 55 (3), 634–640. DOI: 10.1002/pen.23934.10.1002/pen.23934]Open DOISearch in Google Scholar
[20. Jia, P., Zhang, M., Hu, L., Feng, G., Bo, C. & Zhou, Y. (2015). Synthesis and application of environmental castor oil based polyol ester plasticizers for poly (vinyl chloride). ACS Sustain. Chem. Eng. 3, 2187–2193. DOI: 10.1021/acssuschemeng.5b00449.10.1021/acssuschemeng.5b00449]Open DOISearch in Google Scholar
[21. Gamage, P.K. & Farid, A.S. (2011). Migration of novel epoxidized neem oil as plasticizer from PVC: Experimental design approach. J. Appl. Polym. SCI. 121(2), 823–838. DOI: 10.1002/app.33554.10.1002/app.33554]Open DOISearch in Google Scholar
[22. Yang, B., Bai Y. & Cao, Y. (2010). Effects of inorganic nano-particles on plasticizers migration of flexible PVC. J. Appl. Polym. Sci. 115(4), 2178–2182. DOI: 10.1002/app.31310.10.1002/app.31310]Open DOISearch in Google Scholar
[23. Lacerda, T., Carvalho, A.F. & Gandini, A. (2014). Two alternative approaches to the Diels-Alder polymerization of tung oil. RSC Adv. 4(51), 26829–26837. DOI: 10.1039/c4ra03416c.10.1039/c4ra03416c]Open DOISearch in Google Scholar
[24. Huang, K., Liu, Z., Zhang, J., Li, S., Li, M., Xia, J. & Zhou, Y. (2014) Epoxy monomers derived from tung oil fatty acids and its regulable thermosets cured in two synergistic ways. Biomacromolecules. 15(3), 837–843. DOI: 10.1021/bm4018929.10.1021/bm4018929]Open DOISearch in Google Scholar
[25. Yang, X., Li, S., Xia, J., Song, J., Huang, K. & Li, M. (2015). Novel renewable resource-based UV-curable copolymers derived from myrcene and tung oil: Preparation, characterization and properties. Ind. Crop. Prod. 63, 17–25. DOI: 10.1016/j.indcrop.2014.10.024.10.1016/j.indcrop.2014.10.024]Open DOISearch in Google Scholar
[26. Meiorin, C., Aranguren, M.I. & Mosiewicki, M.A. (2015). Polymeric networks based on tung oil: Reaction and modification with green oil monomers. Eur. Polym. J. 67, 551–560. DOI: 10.1016/j.eurpolymj.2015.01.005.10.1016/j.eurpolymj.2015.01.005]Open DOISearch in Google Scholar
[27. Jia, P., Hu, L., Yang, X., Zhang, M., Shang, Q. & Zhou, Y. (2017). Internally plasticized PVC materials via covalent attachment of aminated tung oil methyl ester. RSC Adv. 7(48), 30101–30108. DOI: 10.1039/C7RA04386D.10.1039/704386]Open DOISearch in Google Scholar
[28. Jia, P., Zhang, M., Hu, L., Song, F., Feng, G. & Zhou, Y. (2017). A strategy for nonmigrating plasticized PVC modified with mannich base of waste cooking oil methyl ester. Sci Rep. 2018; 8: 1589. DOI: 10.1038/s41598-018-19958-y.10.1038/s41598-018-19958-y]Search in Google Scholar
[29. Yao, Q. & Wilkie, C.A. (2001).Thermal degradation of PVC in the presence of polystyrene. J. Vinyl. Addit. Technol.7(1), 26–36. DOI: 10.1002/vnl.10261.10.1002/vnl.10261]Open DOISearch in Google Scholar
[30. Soudais, Y., Moga, L., Blazek, J. & Lemort, F. (2007). Coupled DTA-TGA-FT-IR investigation of pyrolytic decomposition of EVA, PVC and cellulose. J. Anal. Appl. Pyrolysis.78(1):46–57. DOI: https://doi.org/10.1016/j.jaap.2006.04.005.10.1016/j.jaap.2006.04.005]Open DOISearch in Google Scholar
[31. Li, Y., Wang, C., Wang G. & Qu, Z. (2008). Application of the long-chain linear polyester in plastification of PVC. J. Wuhan Univ. Technol. 23(1), 100–104. DOI: 10.1007/S11595-006-1100-3.10.1007/S11595-006-1100-3]Open DOISearch in Google Scholar
[32.Yin, B. & Hakkarainen, M. (2010). Oligomeric isosorbide esters as alternative renewable resource plasticizers for PVC. J. Appl. Polym. Sci. 119(4), 2400–2407. DOI: 10.1002/app.32913.10.1002/app.32913]Open DOISearch in Google Scholar
[33. Gonzalez, N. & Fernandez-Berridi, M.J. (2006). Application of fourier transform infrared spectroscopy in the study of interactions between PVC and plasticizers: PVC/plasticizer compatibility versus chemical structure of plasticizer. J. Appl. Polym. Sci. 101, 1731–1737. DOI: 10.1002/app.23381.10.1002/app.23381]Open DOISearch in Google Scholar
[34. Suresh, S.S., Mohanty, S. & Nayak, S.K. (2017). Bio-based epoxidised oil for compatibilization and value addition of poly (vinyl chloride) (PVC) and poly(methyl methacrylate) (PMMA) in recycled blend. J. Polym. Res. 24, 120. DOI: https://doi.org/10.1007/s10965-017-1282-8.10.1007/s10965-017-1282-8]Open DOISearch in Google Scholar