<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>To enhance the performance of humanoids, mobile robots and manipulators, motors are desired to be able to provide high torque without relying on gears. To be able to drive joint motors with high output, the current value that can flow needs to be increased. However, the heat generated by the high current drive can cause motor failure, so cooling is necessary. We used thermoelectric cooling as a new cooling method for high-power drive of motors. By developing a thermoelectric cooling module for motors and conducting experiments, the effectiveness of thermoelectric cooling was verified. In the experiment, the motor was kept running at a high current for a long period of time. The comparison with the motor alone or with water cooling showed that the thermoelectric cooling module can significantly reduce the rise in temperature of the motor. Furthermore, based on the results of the voltage value measurements, it was expected that the increase in coil resistance due to higher coil temperatures would be kept lower than in other cases. The effect on rise in internal temperature was also considered to be greater than that of water cooling. These experimental results show that the thermoelectric cooling module can be used to increase the upper limit of the current at which the motor is continuously driven.</p>
</abstract>

To enhance the performance of humanoids, mobile robots and manipulators, motors are desired to be able to provide high torque without relying on gears. To be able to drive joint motors with high output, the current value that can flow needs to be increased. However, the heat generated by the high current drive can cause motor failure, so cooling is necessary. We used thermoelectric cooling as a new cooling method for high-power drive of motors. By developing a thermoelectric cooling module for motors and conducting experiments, the effectiveness of thermoelectric cooling was verified. In the experiment, the motor was kept running at a high current for a long period of time. The comparison with the motor alone or with water cooling showed that the thermoelectric cooling module can significantly reduce the rise in temperature of the motor. Furthermore, based on the results of the voltage value measurements, it was expected that the increase in coil resistance due to higher coil temperatures would be kept lower than in other cases. The effect on rise in internal temperature was also considered to be greater than that of water cooling. These experimental results show that the thermoelectric cooling module can be used to increase the upper limit of the current at which the motor is continuously driven.

Investigation into Increasing the Motor-Drivable Current Using a Thermoelectric Cooling Module

Power Electronics and Drives

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

To enhance the performance of humanoids, mobile robots and manipulators, motors are desired to be able to provide high torque without relying on gears. To be...

Investigation into Increasing the Motor-Drivable Current Using a Thermoelectric Cooling Module

Online veröffentlicht: 15. Dez. 2022

Seitenbereich: 279 - 289

Eingereicht: 28. Sept. 2022

Akzeptiert: 09. Nov. 2022

DOI: https://doi.org/10.2478/pead-2022-0021

Schlüsselwörter
motor, cooling, thermoelectric effect, Peltier devices, high power

© 2022 Kazuma Morikawa et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Investigation into Increasing the Motor-Drivable Current Using a Thermoelectric Cooling Module

Online veröffentlicht: 15. Dez. 2022

Seitenbereich: 279 - 289

Eingereicht: 28. Sept. 2022

Akzeptiert: 09. Nov. 2022

DOI: https://doi.org/10.2478/pead-2022-0021

Schlüsselwörtermotor, cooling, thermoelectric effect, Peltier devices, high power

© 2022 Kazuma Morikawa et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Schlüsselwörter
motor, cooling, thermoelectric effect, Peltier devices, high power