This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Fig. 1
Section of the distillation column that was designed using SolidWorks™.
Fig. 2
The simulation setup of the column scan.
Fig. 3
(a) SolidWorks™ design of the pipe with solid deposit. (b) Simulation setup.
Fig. 4
Simulation setup for the fifth-generation CT scan.
Fig. 5
The simulation setup used for flow rate measurement using a radiotracer.
Fig. 6
(a) Simulation results of the gamma ray scanning of a distillation column. (b) A section of a distillation column; the arrows indicate the corresponding intensity measured after radiation has passed through the trays.
Fig. 7
Experimental gamma scanning profile (reproduced from [26]).
Fig. 8
(a) Simulation results of the gamma ray scanning of a distillation column with a collapsed tray. (b) A section of a distillation column with a collapsed tray.
Fig. 9
Simulation results of gamma scanning of a deposit-free pipe.
Fig. 10
Simulation results of a pipe with deposited solid phase.
Fig. 11
Application of gamma scanning to detect blockage in pipes (reproduced from [27]).