<abstract xmlns="http://www.w3.org/1999/xhtml">

The current work presents the results of seven sorbent samples investigated with respect to SO2 capture. The sorbents’ reactivity and capacity indexes were determined, and the tests were carried out in accordance with the ‘classical’ procedure for limestone sorbents. The reactivity indexes (RIs) of the tested samples were in the range of 2.57 and 3.55 (mol Ca)/(mol S), while the absolute sorption coefficients as determined by the capacity index (CI) varied between 87.9 and 120.6 (g S)/(kg of sorbent). Porosimetric analysis was also carried out and the specific surface area of the samples was found to be between 0.2 and 1.7 m2/g. The number of micro-, meso- and macro-pores in individual samples was determined from the corresponding pore size distribution histograms, and the values of sorbent RIs and CIs were correlated with the samples’ total porosity and specific surface.
</abstract>

The current work presents the results of seven sorbent samples investigated with respect to SO2 capture. The sorbents’ reactivity and capacity indexes were determined, and the tests were carried out in accordance with the ‘classical’ procedure for limestone sorbents. The reactivity indexes (RIs) of the tested samples were in the range of 2.57 and 3.55 (mol Ca)/(mol S), while the absolute sorption coefficients as determined by the capacity index (CI) varied between 87.9 and 120.6 (g S)/(kg of sorbent). Porosimetric analysis was also carried out and the specific surface area of the samples was found to be between 0.2 and 1.7 m2/g. The number of micro-, meso- and macro-pores in individual samples was determined from the corresponding pore size distribution histograms, and the values of sorbent RIs and CIs were correlated with the samples’ total porosity and specific surface.

The effect of porosity on the reactivity of calcium sorbents

Faculty of Infrastructure and Environment, Department of Advanced Energy Technologies

Mineralogia

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"The effect of porosity on the reactivity of calcium sorbents"}

The current work presents the results of seven sorbent samples investigated with respect to SO2 capture. The sorbents’ reactivity and capacity indexes were...

The effect of porosity on the reactivity of calcium sorbents

Online veröffentlicht: 27. Okt. 2020

Seitenbereich: 37 - 45

Eingereicht: 08. Mai 2020

Akzeptiert: 28. Sept. 2020

DOI: https://doi.org/10.2478/mipo-2020-0004

Schlüsselwörter
limestone, desulfurization, sorbent, reactivity, fluidization

© 2020 Michał Wichliński et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The effect of porosity on the reactivity of calcium sorbents

Online veröffentlicht: 27. Okt. 2020

Seitenbereich: 37 - 45

Eingereicht: 08. Mai 2020

Akzeptiert: 28. Sept. 2020

DOI: https://doi.org/10.2478/mipo-2020-0004

Schlüsselwörterlimestone, desulfurization, sorbent, reactivity, fluidization

© 2020 Michał Wichliński et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
limestone, desulfurization, sorbent, reactivity, fluidization