[[1] Wrona, G. & Jasinski, M. (2013). AC-DC Converter with Asymmetrical Higher Harmonics Compensation Function in Sustainable AC Grid. Electrical, Control and Communication Engineering, 2(1), pp. 5-13. Retrieved 6 Aug. 2013, from doi:10.2478/ecce-2013-000110.2478/ecce-2013-0001]Search in Google Scholar
[[2] A. Suzdalenko, A. Stepanov and I. Galkin, "Choice of power factor corrector for effective operation of MicroGrid and its elements," in Proceedings of International School on Nonsinusoidal Currents and Compensation (ISNCC), June 15-18, 2010, Lagow, Poland, pp. 234-238.10.1109/ISNCC.2010.5524476]Search in Google Scholar
[[3] I. Galkin, A. Stepanov, P. Suskis, "Selection of power factor corrector for modular uninterruptable power supply system," in Proceedings of 14th International Power Electronics and Motion Control Conference (EPE-PEMC), 6-8 Sept., 2010, Ohrid, Macedonia, pp.T13-17-T13-21.10.1109/EPEPEMC.2010.5606807]Search in Google Scholar
[[4] T. Nussbaumer, K. Raggl, and J.W. Kolar, "Design Guidelines for Interleaved Single-Phase Boost PFC Circuits," IEEE Transactions on Industrial Electronics, vol.56, no.7, pp.2559-2573, July 2009.]Search in Google Scholar
[[5] Chongming Qiao and K.M. Smedley, "A topology survey of singlestage power factor corrector with a boost type input-current-shaper," IEEE Transactions on Power Electronics, vol.16, no.3, pp.360-368, May 2001.10.1109/63.923768]Search in Google Scholar
[[6] Z. Lai, K.M. Smedley, "A family of continuous-conduction-mode power-factor-correction controllers based on the general pulse-width modulator," IEEE Transactions on Power Electronics, vol.13, no.3, pp.501-510, May 1998.10.1109/63.668113]Search in Google Scholar
[[7] Qian Jinrong, Zhao Qun, F.C. Lee, "Single-stage single-switch powerfactor- correction AC/DC converters with DC-bus voltage feedback for universal line applications," IEEE Transactions on Power Electronics, vol.13, no.6, pp.1079-1088, Nov 1998.]Search in Google Scholar
[[8] Ivakhno, V., Zamaruiev, V. & Ilina, O. (2013). Estimation of Semiconductor Switching Losses under Hard Switching using Matlab/Simulink Subsystem. Electrical, Control and Communication Engineering, 2(1), pp. 20-26. Retrieved 6 Aug. 2013, from doi:10.2478/ecce-2013-000310.2478/ecce-2013-0003]Search in Google Scholar
[[9] M.M. Jovanovic and Jang Yungtaek, "State-of-the-art, single-phase, active power-factor-correction techniques for high-power applications - an overview," IEEE Transactions on Industrial Electronics, vol.52, no.3, pp.701-708, June 2005.10.1109/TIE.2005.843964]Search in Google Scholar
[[10] Mao Hengchun, F.C.Y. Lee, D. Boroyevich and S. Hiti, "Review of high-performance three-phase power-factor correction circuits," IEEE Transactions on Industrial Electronics, vol.44, no.4, pp.437-446, Aug 1997.10.1109/41.605616]Search in Google Scholar
[[11] G. A. Belov, "Dynamic models of multiphase boost pulse converter," Electricity, vol. 6, pp. 21-28, 2010.]Search in Google Scholar
[[12] G. A. Belov and A. V. Serebryannikov, "Calculation of power factor corrector with power transistor opening at zero current," Electricity, vol. 3, pp. 46-56, 2012.]Search in Google Scholar
[[13] Y. A. Denisov, DC Stabilizers with Pulse-Width Modulated and Frequency Modulated Quasi-Resonant Converters. Kiev: Institute of Electrodynamics of National Academy of Sciences of Ukraine, 2001.]Search in Google Scholar
[[14] Y. A. Denisov and A. N. Gorodny, "Steady-state characteristics of quasiresonant pulse converter with a parallel zero current switching circuit," Technical Electrodynamics, Special Issue "Power Electronics and Energy Efficiency", vol. 1, pp. 20-26, 2011.]Search in Google Scholar
[[15] Y. Z. Tsypkin, Fundamentals of the theory of automatic systems. Moscow: Science, 1977.]Search in Google Scholar