Dynamics Response of Rail Vehicle Induced by Incorporating Electric-Dominated Transmission Component

[1] Zhang, T., Li, D., & Qiao, Y. (2018). Comprehensive optimization of urban rail transit timetable by minimizing total travel times under time-dependent passenger demand and congested conditions. Applied Mathematical Modelling, 58, 421-446. Search in Google Scholar

[2] Zeng, Z.-p., et al. (2020). Wheel-rail stochastic dynamics and rail wear analysis of small radius curved sections of a tram line based on generalized probability density evolution. Proceedings of the Institution of Mechanical Engineers Part F-Journal of Rail and Rapid Transit. Search in Google Scholar

[3] Ma, H., et al. (2020). Influence of Full-Life Cycle Wheel Profile on the Contact Performance of Wheel and Standard Fixed Frog in Heavy Haul Railway. Shock and Vibration, 2020. Search in Google Scholar

[4] Ma, C., et al. (2021). The initiation mechanism and distribution rule of wheel high-order polygonal wear on high-speed railway. Engineering Failure Analysis, 119. Search in Google Scholar

[5] Zhang, G., et al. (2019). Inverter Operating Characteristics Optimization for DC Traction Power Supply Systems. IEEE Transactions on Vehicular Technology, 68(4), 3400-3410. Search in Google Scholar

[6] Huang, X., et al. (2021). A TOD Planning Model Integrating Transport and Land Use in Urban Rail Transit Station Areas. IEEE Access, 9, 1103-1115. Search in Google Scholar

[7] Yuan, Z., Tian, C., & Wu, M. (2020). Modelling and parameter identification of friction coefficient for brake pair on urban rail vehicle. International Journal of Rail Transportation. Search in Google Scholar

[8] Wang, H., et al. (2020). A Bayesian Network Approach for Condition Monitoring of High-Speed Railway Catenaries. IEEE Transactions on Intelligent Transportation Systems, 21(10), 4037-4051. Search in Google Scholar

[9] Lei, Y., et al. (2018). An Improved Torque and Current Pulsation Suppression Method for Railway Traction Drives Under Fluctuating DC-Link Voltage. IEEE Transactions on Power Electronics, 33(10), 8565-8577. Search in Google Scholar

[10] Liu, Q., Liang, T., & Dinavahi, V. (2020). Real-Time Hierarchical Neural Network Based Fault Detection and Isolation for High-Speed Railway System Under Hybrid AC/DC Grid. IEEE Transactions on Power Delivery, 35(6), 2853-2864. Search in Google Scholar

[11] Hao, F., et al. (2020). Optimal Voltage Regulation and Power Sharing in Traction Power Systems With Reversible Converters. IEEE Transactions on Power Systems, 35(4), 2726-2735. Search in Google Scholar

[12] Liu, B., et al. (2020). Analysis and Optimization of Driving Attitude and Oscillation Characteristics of Suspension-Type Small Rail Vehicles. Shock and Vibration, 2020. Search in Google Scholar

[13] Zhang, H., et al. (2020). Properties of Chinese railway network: Multilayer structures based on timetable data. Physica a-Statistical Mechanics and Its Applications, 560. Search in Google Scholar

[14] Li, R., et al. (2020). Segmented Power Supply Preset Control Method of High-Speed Rail Contactless Traction Power Supply System considering Regenerative Braking Energy Recovery. Mathematical Problems in Engineering, 2020. Search in Google Scholar

[15] Chen, J., et al. (2019). The Harmonic Characteristic of the Advanced Synchronous SVPWM Overmodulation Strategy. IEEE Access, 7, 148934-148949. Search in Google Scholar

[16] Luo, R., et al. (2020). A nonlinear rubber spring model for the dynamics simulation of a high-speed train. Vehicle System Dynamics, 58(9), 1367-1384. Search in Google Scholar

[17] Guo, J., et al. (2020). Field Measurements of Vibration on the Car Body-Suspended Equipment for High-Speed Rail Vehicles. Shock and Vibration, 2020, 6041543. Search in Google Scholar

[18] Bao, K., et al. (2021). Fatigue life of the welding seam of a tracked vehicle body structure evaluated using the structural stress method. Engineering Failure Analysis, 120. Search in Google Scholar

[19] Li, F., et al. (2019). Vibration fatigue dynamic stress simulation under multi-load input condition: Application to metro lifeguard. Engineering Failure Analysis, 99, 141-152. Search in Google Scholar

[20] Li, F.S., H. Wu, & P.B. Wu. (2021). Vibration fatigue dynamic stress simulation under non-stationary state. Mechanical Systems and Signal Processing, 146. Search in Google Scholar

[21] Wang, Q., et al. (2018). Carbody vibrations of high-speed train caused by dynamic unbalance of underframe suspended equipment. Advances in Mechanical Engineering, 10(12), 1-13. Search in Google Scholar

[22] Lu, Z., et al. (2021). Coupling model and vibration simulations of railway vehicles and running gear bearings with multitype defects. Mechanism and Machine Theory, 157. Search in Google Scholar

[23] Xu, K., J. Zeng, & L. Wei. (2019). An analysis of the self-excited torsional vibration of high-speed train drive system. Journal of Mechanical Science and Technology, 33(3), 1149-1158. Search in Google Scholar

[24] Lei, Z., & Z. Wang. (2020). Contact and creep characteristics of wheel-rail system under harmonic corrugation excitation. Journal of Vibration and Control. Search in Google Scholar

[25] Gong, D., J.S. Zhou, & W.J. Sun. (2016). Influence of under-chassis-suspended equipment on high-speed EMU trains and the design of suspension parameters. Proceedings of the Institution of Mechanical Engineers Part F-Journal of Rail and Rapid Transit, 230(8), 1790-1802. Search in Google Scholar

[26] Liu, J., & S. Du. (2020). Dynamic Analysis of a High-Speed Railway Train With the Defective Axle Bearing. International Journal of Acoustics and Vibration, 25(4), 525-531. Search in Google Scholar

[27] Huang, C., & J. Zeng. (2018). Dynamic behaviour of a high-speed train hydraulic yaw damper. Vehicle System Dynamics, 56(12), 1922-1944. Search in Google Scholar

[28] Wu, Q., et al. (2020). Curving resistance from wheel-rail interface. Vehicle System Dynamics. Search in Google Scholar

[29] Zhang, S., et al. (2020). Dynamic wheel-rail interaction at high speed based on time-domain moving Green's functions. Journal of Sound and Vibration, 488. Search in Google Scholar

[30] Wang, B., et al. (2020). An investigation into the fatigue failure of metro vehicle bogie frame. Engineering Failure Analysis, 118. Search in Google Scholar

[31] Deng, X., et al. (2019). European high-speed bogie technology review. International Journal of Vehicle Design, 79(1), 43-62. Search in Google Scholar

[32] Wang, J., et al. (2020). Nonsmooth Dynamics of a Gear-Wheelset System of Railway Vehicles Under Traction/Braking Conditions. Journal of Computational and Nonlinear Dynamics, 15(8). Search in Google Scholar

[33] Xu, K., et al. (2020). Optimal profile design for rail grinding based on wheel-rail contact, stability, and wear development in high-speed electric multiple units. Proceedings of the Institution of Mechanical Engineers Part F-Journal of Rail and Rapid Transit, 234(6), 666-677. Search in Google Scholar

[34] Li, M., et al. (2021). Dynamic response analysis of train-induced vibration impact on the Probhutaratna pagoda in Beijing. Earthquake Engineering and Engineering Vibration, 20(1), 223-243. Search in Google Scholar

[35] Lei, S., Y. Ge, & Q. Li. (2020). Effect and its mechanism of spatial coherence of track irregularity on dynamic responses of railway vehicles. Mechanical Systems and Signal Processing, 145. Search in Google Scholar

[36] Liao, B., & Y. Luo. (2020). Influence of alignments of guide curves on the passing performance of railway turnout diverging route. Vehicle System Dynamics. Search in Google Scholar

[37] Cui, L. (2014). Vibration Characteristic Analysis of Driving System for High-Speed Trains. Southwest Jiaotong University. Search in Google Scholar

[38] Fan, T., Z. Ren, & R. Xue. (2021). Load variation of the wheel-mounted brake disc bolts of a high-speed train. Engineering Failure Analysis, 119. Search in Google Scholar

[39] Xu, L., et al. (2020). Modelling of vehicle-track related dynamics: a development of multi-finite-element coupling method and multi-time-step solution method. Vehicle System Dynamics. Search in Google Scholar

[40] Ye, Y., & Y. Sun. (2020). Reducing wheel wear from the perspective of rail track layout optimization. Proceedings of the Institution of Mechanical Engineers Part K-Journal of Multi-Body Dynamics. Search in Google Scholar

[41] Zhang, W., et al. (2020). Research on the Simulation of Wheelset Response Characteristic Identification of Railway Fastener Loosening. Mathematical Problems in Engineering, 2020. Search in Google Scholar

[42] Xiao, H., et al. (2020). Analysis on mechanical characteristics of welded joint with a new reinforced device in high-speed railway. Advances in Mechanical Engineering, 12(10). Search in Google Scholar