<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The paper presents the results of research on the determination of the accuracy parameter for European Geostationary Navigation Overlay System (EGNOS) positioning for a dual set of on-board global navigation satellite system (GNSS) receivers. The study focusses in particular on presenting a modified algorithm to determine the accuracy of EGNOS positioning for a mixed model with measurement weights. The mathematical algorithm considers the measurement weights as a function of the squared inverse and the inverse of the position dilution of precision (PDOP) geometrical coefficient. The research uses actual EGNOS measurement data recorded by two on-board GNSS receivers installed in a Diamond DA 20-C airplane. The calculations determined the accuracy of EGNOS positioning separately for each receiver and the resultant value for the set of two GNSS receivers. Based on the conducted tests, it was determined that the mixed model with measurement weights in the form of a function of the inverse square of the PDOP geometrical coefficient was the most efficient and that it improved the accuracy of EGNOS positioning by 37%–63% compared to the results of position errors calculated separately for each GNSS receiver.</p>
</abstract>

The paper presents the results of research on the determination of the accuracy parameter for European Geostationary Navigation Overlay System (EGNOS) positioning for a dual set of on-board global navigation satellite system (GNSS) receivers. The study focusses in particular on presenting a modified algorithm to determine the accuracy of EGNOS positioning for a mixed model with measurement weights. The mathematical algorithm considers the measurement weights as a function of the squared inverse and the inverse of the position dilution of precision (PDOP) geometrical coefficient. The research uses actual EGNOS measurement data recorded by two on-board GNSS receivers installed in a Diamond DA 20-C airplane. The calculations determined the accuracy of EGNOS positioning separately for each receiver and the resultant value for the set of two GNSS receivers. Based on the conducted tests, it was determined that the mixed model with measurement weights in the form of a function of the inverse square of the PDOP geometrical coefficient was the most efficient and that it improved the accuracy of EGNOS positioning by 37%–63% compared to the results of position errors calculated separately for each GNSS receiver.

Analysis of the Determination of the Accuracy Parameter for Dual Receivers Based on EGNOS Solution in Aerial Navigation

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The paper presents the results of research on the determination of the accuracy parameter for European Geostationary Navigation Overlay System (EGNOS)...

Analysis of the Determination of the Accuracy Parameter for Dual Receivers Based on EGNOS Solution in Aerial Navigation

Online veröffentlicht: 01. Nov. 2022

Seitenbereich: 365 - 372

Eingereicht: 06. Juli 2022

Akzeptiert: 22. Aug. 2022

DOI: https://doi.org/10.2478/ama-2022-0043

Schlüsselwörter
SBAS, EGNOS, accuracy, GNSS receivers, position errors

© 2022 Kamil Krasuski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Analysis of the Determination of the Accuracy Parameter for Dual Receivers Based on EGNOS Solution in Aerial Navigation

Online veröffentlicht: 01. Nov. 2022

Seitenbereich: 365 - 372

Eingereicht: 06. Juli 2022

Akzeptiert: 22. Aug. 2022

DOI: https://doi.org/10.2478/ama-2022-0043

SchlüsselwörterSBAS, EGNOS, accuracy, GNSS receivers, position errors

© 2022 Kamil Krasuski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
SBAS, EGNOS, accuracy, GNSS receivers, position errors