<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The article is focused on optimization of four-facet drill for 3D drilling numerical modelling. For optimization, the process of reverse engineering by PowerShape software was used. The design of four-facet drill was created in NumrotoPlus software. The modified 3D model of the drill was used in the numerical analysis of cutting forces. Verification of the accuracy of 3D models for reverse engineering was implemented using the colour deviation maps. The CAD model was in the STEP format. For simulation software, 3D model in the STEP format is ideal. STEP is a solid model. Simulation software automatically splits the 3D model into finite elements. The STEP model was therefore more suitable than the STL model.</p></abstract>

The article is focused on optimization of four-facet drill for 3D drilling numerical modelling. For optimization, the process of reverse engineering by PowerShape software was used. The design of four-facet drill was created in NumrotoPlus software. The modified 3D model of the drill was used in the numerical analysis of cutting forces. Verification of the accuracy of 3D models for reverse engineering was implemented using the colour deviation maps. The CAD model was in the STEP format. For simulation software, 3D model in the STEP format is ideal. STEP is a solid model. Simulation software automatically splits the 3D model into finite elements. The STEP model was therefore more suitable than the STL model.

3D Model Optimization of Four-Facet Drill for 3D Drilling Simulation

Institute of Production Technologies, Faculty of Materials Science and Technology in Trnava, Slovak University of Technology in Bratislava, Ulica Jána Bottu 2781/25, 917 24 Trnava, Slovak Republic

Research Papers Faculty of Materials Science and Technology Slovak University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"3D Model Optimization of Four-Facet Drill for 3D Drilling Simulation"}

The article is focused on optimization of four-facet drill for 3D drilling numerical modelling. For optimization, the process of reverse engineering by...

3D Model Optimization of Four-Facet Drill for 3D Drilling Simulation

Online veröffentlicht: 04. Apr. 2017

Seitenbereich: 87 - 93

DOI: https://doi.org/10.1515/rput-2016-0043

Schlüsselwörter
Reverse engineering, modelling, drill, simulation, four-facet drill

© 2016 Ivan Buranský et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

3D Model Optimization of Four-Facet Drill for 3D Drilling Simulation

Online veröffentlicht: 04. Apr. 2017

Seitenbereich: 87 - 93

DOI: https://doi.org/10.1515/rput-2016-0043

SchlüsselwörterReverse engineering, modelling, drill, simulation, four-facet drill

© 2016 Ivan Buranský et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Schlüsselwörter
Reverse engineering, modelling, drill, simulation, four-facet drill