<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The paper presents tests of wind velocity distribution at the inlet to the working section of a wind tunnel. Unconventional guide vanes were introduced in the construction of the wind tunnel to obtain a uniform air flow in this area.</p></abstract>

The paper presents tests of wind velocity distribution at the inlet to the working section of a wind tunnel. Unconventional guide vanes were introduced in the construction of the wind tunnel to obtain a uniform air flow in this area.

Air Flow Formation in the Inlet of a Closed Circuit Boundary Layer Wind Tunnel using the One-Set Guide Vanes Solution

Institute of Structural Mechanics, Faculty of Civil Engineering

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

The paper presents tests of wind velocity distribution at the inlet to the working section of a wind tunnel. Unconventional guide vanes were introduced in the...

Air Flow Formation in the Inlet of a Closed Circuit Boundary Layer Wind Tunnel using the One-Set Guide Vanes Solution

Published Online: May 26, 2020

Page range: 81 - 98

DOI: https://doi.org/10.4467/2353737XCT.17.131.6882

Keywords
wind tunnel, guide vanes, uniform wind velocity distribution

© 2020 Renata Kłaput et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Air Flow Formation in the Inlet of a Closed Circuit Boundary Layer Wind Tunnel using the One-Set Guide Vanes Solution

Published Online: May 26, 2020

Page range: 81 - 98

DOI: https://doi.org/10.4467/2353737XCT.17.131.6882

Keywordswind tunnel, guide vanes, uniform wind velocity distribution

© 2020 Renata Kłaput et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Keywords
wind tunnel, guide vanes, uniform wind velocity distribution