<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In the article, the value of compressive stress defined according to the <italic>flat jack</italic> method with a theoretical value of the stress was compared. The test was performed in a laboratory using part of the 38 cm thick masonry wall according to the procedure described in the ASTM C1196 – 14a Standard. Significant correspondence between the obtained results confirms that this diagnostic method is useful in Polish conditions as well as it allows one to estimate approximately how accurate it is.</p></abstract>

In the article, the value of compressive stress defined according to the flat jack method with a theoretical value of the stress was compared. The test was performed in a laboratory using part of the 38 cm thick masonry wall according to the procedure described in the ASTM C1196 – 14a Standard. Significant correspondence between the obtained results confirms that this diagnostic method is useful in Polish conditions as well as it allows one to estimate approximately how accurate it is.

Stress state laboratory verification in masonry structures according to the <italic>flat jack</italic> method

Institute of Building Materials and Structures, Faculty of Civil Engineering

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Stress state laboratory verification in masonry structures according to the  method

In the article, the value of compressive stress defined according to the flat jack method with a theoretical value of the stress was compared. The test was...

Stress state laboratory verification in masonry structures according to the flat jack method

Published Online: May 23, 2020

Page range: 119 - 128

DOI: https://doi.org/10.4467/2353737XCT.17.022.6215

Keywords
semi-destructive tests, flat jack, masonry structure, stress state

© 2018 Dawid Łątka, published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Stress state laboratory verification in masonry structures according to the flat jack method

Published Online: May 23, 2020

Page range: 119 - 128

DOI: https://doi.org/10.4467/2353737XCT.17.022.6215

Keywordssemi-destructive tests, flat jack, masonry structure, stress state

© 2018 Dawid Łątka, published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Keywords
semi-destructive tests, flat jack, masonry structure, stress state