1. bookVolume 14 (2017): Issue 14 (March 2017)
Journal Details
License
Format
Journal
First Published
30 Mar 2018
Publication timeframe
1 time per year
Languages
English
access type Open Access

Effect of plastic deformation on the magnetic properties of selected austenitic stainless steels

Published Online: 28 Jan 2020
Page range: 15 - 18
Received: 23 Jan 2017
Accepted: 14 Mar 2017
Journal Details
License
Format
Journal
First Published
30 Mar 2018
Publication timeframe
1 time per year
Languages
English
Abstract

Austenitic stainless steels are materials, that are widely used in various fields of industry, architecture and biomedicine. Their specific composition of alloying elements has got influence on their deformation behavior. The main goal of this study was evaluation of magnetic properties of selected steels, caused by plastic deformation. The samples were heat treated in different intervals of temperature before measuring. Then the magnetic properties were measured on device designed for measuring of magnetism. From tested specimens, only AISI 304 confirmed effect of plastic deformation on the magnetic properties. Magnetic properties changed with increasing temperature.

Keywords

1. Correa Soares G. et al. 2017. Strain hardening behavior and micro-structural evolution during plastic deformation of dual phase, non-grain oriented electrical and AISI 304 steels, Materials Science and Engineering A 684, 577-585.Search in Google Scholar

2. Gauzzi F. et al. 2006. AISI 304 steel: anomalous evolution of martensitic phase following heat treatments at 400 °C, Materials Science and Engineering A 438-440, 202-206.Search in Google Scholar

3. Jakobsen P.T., Maahn E. 2001. Temperature and potential dependence of crevice corrosion of AISI 316 steel, Corrosion Science 43, 1693-1709.Search in Google Scholar

4. Martínková J. 2010.Vliv delta feritu na mechanické vlastnosti ocelí a metody stanovení jeho obsahu (Effect of delta ferrite on mechanical properties of steels and methods of determining of its content), SVOČ-FST, Západočeská univerzita v Plzni, Fakulta strojní.Search in Google Scholar

5. Mitra A. et al. 2006: Effect of plastic deformation on the magnetic properties 304 stainless steel during tensile loading, ECNDT, We.4.2.4.Search in Google Scholar

6. Nový F. et al. 2014. Fatigue strength improvement of the AISI 316Ti austenitic stainless steel by shot peening, Production Engineering Archives Vol. 4, No. 3, 2-6.Search in Google Scholar

7. O’sullivan D. et al. 2004. Characterisation of ferritic stainless steel by Barkhausen techniques, NDT & E Inetrnational, Vol. 37, 489-496.Search in Google Scholar

8. Rodríguez-Martínez J.A. et al. 2011. Experimental study on the martensitic transformation in AISI 304 steel sheets subjected to tension under wide ranges of strain rate at room temperature, Materials Science and Engineering A 528, 5974-5982.Search in Google Scholar

9. Tourki Z. et al. 2005. The kinetic of induced martensitic formation and its effect on forming limit curves in the AISI 304 stainless steel, Journal of materials processing technology 166, 330-336.Search in Google Scholar

10. Vértesy G. et al. 2005. Nondestructive indication of plastic deformation of cold-rolled stainless steel by magnetic minor hysteresis loop measurement, Journal of Magnetism and Magnetic Materials 285, 335-342.Search in Google Scholar

11. Yae Kina A. et al. 2008. Microstructure and intergranular corrosion resistance evaluation of AISI 304 steel for high temperature service, Materials characterisation 59, 651-655.Search in Google Scholar

12. Yamasaki T. et al. 1996, Effect of applied stresses on magneto-striction of low carbon steel, NDT & E International, Vol. 29, No.5, pp. 263-268.Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo