Paper – Sawdust Composites: Fabrication and Comparison in Terms of Heat Transfer and Strength Properties

[1] Begum K., Islam M.A. (2013): Natural Fiber as a substitute to Synthetic Fiber in Polymer Composites: A Review, Research Journal of Engineering Sciences, 2(3); 46-53. Search in Google Scholar

[2] Mahir F.I., Keya K.N., Sarker B., Nahiun K.M., Khan R.A. (2019): A brief review on natural fiber used as a replacement of synthetic fiber in polymer composites, Materials Engineering Research, 1(2); 86-97; https://doi.org/10.25082/MER.2019.02.007. Search in Google Scholar

[3] Sanandiya N.D., Ottenhein C., Phua J.W., Caligiani A., Dritsas S., Fernandez J.G. (2020): Circular manufacturing of Chitinous biocomposites via bioconversion of urban refuse, Scientific Reports, 10, Article number: 4632. Search in Google Scholar

[4] McKinney R.W.J. (1995): Technology of paper recycling, Blackie Academic and Professional, Chapman and Hall, New York, London, pp. 7-15. Search in Google Scholar

[5] Rizki M., Tamai Y., Takashi Y., Terazawa M. (2010): Scrutiny on physical properties of sawdust from tropical commercial wood species: Effects of Different mills and sawdust’s particle size, Journal of Forestry Research, 7(1); 20-23. Search in Google Scholar

[6] Zafar S., (2019): Biomass from wood processing industries, Recycling of wood waste, www.bioenergyconsult.com; Last accessed November 5, 2019. Search in Google Scholar

[7] Owoyemi J.M., Zakariya H.O., Elegbede I.O. (2016): Sustainable wood waste management in Nigeria, Environmental & Socio-economic Studies, 4(3); 1-9; https://10.1515/environ-2016-0012. Search in Google Scholar

[8] Achi C.G., Coker A.O., Sridhar M.K.C. (2018): Cassava processing wastes: Options and Potentials for Resource Recovery in Nigeria. In: S. Ghosh (eds) Utilization and Management of Bioresources, Springer, Singapore, pp. 77-89; https://10.1007/978-981-10-5349-8. Search in Google Scholar

[9] Guimařaes G.H.C., Dantas R.L., Sousa A.S.B.,Soares L.G., Melo R.S.,Silva R.S., Lima R.P., Mendonca R.M.N., Beaudry R.M., S.M. Silva (2017): Impact of Cassava Starch-alginate based coating added with ascorbic acid and elicitor on quality and sensory attributes during pineapple storage, African Journal of Agricultural Research, 12(9); 664-673; https://doi.org/10.58971/AJAR2016.11652. Search in Google Scholar

[10] Praseptiangga D., Utami R., Khasanah L.U., Evirananda I.P., Kawiji (2017): Effect of Cassava-based edible coating incorporated with lemongrass essential oil on the quality of papaya MJ9, International Conference on Advanced Materials for Better Future. IOP Conference Series: Materials Science and Engineering, 176(1):012054; https://doi.org/10.1088/1757-899X/176/1/012054. Search in Google Scholar

[11] Chitedze J., Monjerezi M., Saka J.D.K., Steenekamp J. (2012): Binding effect of cassava starches on the compression and mechanical properties of Ibuprofen tablets, Journal of Applied Pharmaceutical Science, 2(4); 04-10; https://doi.org/10.7324/JAPS.02.4.004. Search in Google Scholar

[12] Adjei F.K., Osei Y.A., Kuntworbe N., Ofori-Kwakye K. (2017): Evaluation of the disintegrant properties of Native Starches of Five New Cassava varieties in Paracetamol tablet formulations, Journal of Pharmaceutics, Vol. 2017 Article ID 2326912; 1 – 9; https://doi.org/10.1155/2017/2326912. Search in Google Scholar

[13] Etuk S.E., Adeniran A.O., Robert U.W., Akankpo A.O., Agbasi O.E. (2022): A Novel Study of Dielectric Properties of Discs Fabricated from Nanopowder of Calcined Clams, Periwinkle, and Oyster Shells, Polytechnica, https://doi.org/10.1007/s41050-022-00039-z. Search in Google Scholar

[14] Umanah E.I., Ekpenyong N.E., Akpan A.O. (2022): Electrical and Dielectric Properties of discs fabricated using Periwinkle Shell Nanopowder and Dry Cassava Starch, Bulletin of the Polytechnic Institute of Iași, 68(72), 1; 7-20; https://doi.org/10.2478/bipmf-2022-0001. Search in Google Scholar

[15] Adeniran A.O., Akankpo A.O., Edet S.E., Robert U.W., Agbasi O.E. (2022): Comparative study of electrical resistance of disc-shaped compacts fabricated using calcined clams shell, periwinkle shell and oyster shell nanopowder, Kragujevac J. Sci., 44; 25–36; https://doi.org/10.5937/KgJSci2244025A. Search in Google Scholar

[16] Umanah E.I., Ekpenyong N.E., Akpan A.O. (2022): Influence of Temperature on Capacitance and Dielectric permittivity of Disc-shaped Compact fabricated from Periwinkle Shell Powder, Researchers Journal of Science and Technology, 2(2); 44-54; https://rejost.com.ng/index.php/home/article/view/34. Search in Google Scholar

[17] Okeyinka O.M., Idowu O.J. (2014): Assessment of the suitability of paper waste as an engineering material, Engineering, Technology & Applied Science Research, 4(6); 724-727; https://doi.org/10.48084/etasr.485. Search in Google Scholar

[18] Wachira G.G., Gitau A.N., Kimani M.W., Njoroge B.N.K. (2015): Mechanical Properties of Sawdust Briquettes of Eucalyptus Tree Species of Different binders and Press Machines, International Journal of Emerging Technology and Advanced Engineering, 5(4); 532-538. Search in Google Scholar

[19] Atoyebi O.D., Adediran A.A., Oluwatimilehin A.C. (2018): Physical and Mechanical Properties evaluation of particleboard produced from sawdust and plastic waste, International Journal of Engineering Research in Africa, 40;1-8; https://doi.org/10.4028/www.scientific.net/JERA.40.1. Search in Google Scholar

[20] Abu-Zarifa A., Abu-Shammala M., Al-Sheikh A. (2018): Sustainable manufacturing of particleboards from sawdust and agricultural waste mixed with recycled plastics, American Journal of Environmental Engineering, 8(5); 174-180; https://doi.org/10.5923/j.ajee.20180805.02. Search in Google Scholar

[21] Antwi-Boasiako C., Ofosuhene L., Boadu K.B. (2018): Suitability of sawdust from three tropical timbers for wood-cement composites, Journal of Sustainable Forestry, 37(4); 414-428; https://doi.org/10.1080/10549811.2018.1427112. Search in Google Scholar

[22] Ku H., Donald M., Cardona F., Trada M. (2012): Flexural Properties of sawdust – reinforced epoxy composites post – cured in microwaves, Journal of Composite Materials, 0(0); 1-12; https://doi.org/10.1177/0021998311433437. Search in Google Scholar

[23] Edafiadhe E.O., Nyorere O., Hilary U. (2019): Compressive Behaviours of Oil Bean Shell and Wood Particulates/Epoxy Composite Board, Archives of Current Research International, 16(3); 1-8; https://doi.org/10.9734/acri/2019/v16i330089. Search in Google Scholar

[24] Kaza S., Yao L.C., Bhada-Tata P., Woerden F.V. (2018): What a waste 2.0: A global snapshot of solid waste management to 2050, World Bank Publications, Last accessed September 20, 2018. https://openknowledge.worldbank.org/handle/10986/30317. Search in Google Scholar

[25] ASTM D6393/D6393M (2021): Standard Test Method for Bulk Solids Characterisation by Carr Indices, ASTM International, West Conshohocken, PA. Search in Google Scholar

[26] Al-Hashemi H.M.B., Al-Amoudi O.S.B. (2018): A review on the angle of repose of granular materials, Powder Technology, 330; 397-417; https://doi.org/10.1016/j.powtec.2018.02.003. Search in Google Scholar

[27] ASTM C136/C136M (2019): Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, ASTM International, West Conshohocken, PA. Search in Google Scholar

[28] Ayeni A.O.. Adeeyo O.A., Oresegun O.M., Oladimeji T.E. (2015): Compositional analysis of lignocellulosic materials: Evaluation of an economically viable method suitable for woody and non-woody biomass, American Journal of Engineering Research, 4(4); 14-19. Search in Google Scholar

[29] Robert U.W., Etuk S.E., Agbasi O.E., Okorie U.S. (2021): Quick Determination of Thermal Conductivity of Thermal Insulators Using a Modified Lee – Charlton’s Disc Apparatus Technique, International Journal of Thermophysics, 42: Article number 113; https://doi.org/10.1007/s10765-021-02864-3. Search in Google Scholar

[30] Robert U. W., Etuk S. E., Agbasi O. E., Okorie U. S., Ekpenyong N. E., Anonaba A. U. (2022): On the Modification of Lee – Charlton’s Disc Apparatus Technique for Thermal Conductivity Determination, Researchers Journal of Science and Technology, 2(3): 1-17. Search in Google Scholar

[31] Robert U.W., Etuk S.E., Agbasi O.E. (2019): Modified Water Displacement Method and its Use for Determination of Bulk Density of Porous Materials, J Renew Energ Mech., 1(1); 1-16; https://doi.org/10.25299/rem.2029.vol1(01).2292. Search in Google Scholar

[32] Okorie U.S., Robert U.W., Iboh U.A., Umoren G.P. (2020): Assessment of the suitability of tiger nut fibre for structural applications, Journal of Renewable Energy and Mechanics, 3(1); 32-39; https://doi.org/10.25299/rem.2020.vol3(01).4417. Search in Google Scholar

[33] Robert U.W., Etuk S.E., Agbasi O.E., Umoren G.P., Inyang N.J. (2021): Investigation of thermophysical and mechanical properties of board produced from coconut (Cocos nucifera) leaflet. Environmental Technology & Innovation, 24(1); 101869; https://doi.org/10.1016/j.eti.2021/101869. Search in Google Scholar

[34] Etuk S.E., Robert U.W., Agbasi O.E. (2020): Design and Performance Evaluation of a device for determination of specific heat capacity of thermal insulators, Beni-Suef University Journal of Basic and Applied Sciences, 9(34); 1-7; https://doi.org/10.1186/s43088-020-00062-y. Search in Google Scholar

[35] Vasudeva A.S. (2013): Modern Engineering Physics, 6^th revised edn., Part II, S. Chand & Company Ltd, Ram Nagar, New Delhi, p. 39, ISBN 81-219-1757-3. Search in Google Scholar

[36] Etuk S.E., Agbasi O.E., Abdulrazzaq Z.T., Robert U.W. (2018): Investigation of thermophysical properties of Alates (swarmers) termites wing as potential raw material for insulation, Int. J. Sci. World, 6(1); 1-7; https://doi.org/10.14419/ijsw.v6i1.8529. Search in Google Scholar

[37] Ekpenyong N.E., Umoren G.P., Udo I.E., Yawo O.J. (2022): Assessment of Thermophysical and Mechanical Properties of Composite Panels Fabricated from Untreated and Treated Coconut Husk Particles for Structural Application, Brilliant Engineering, 2; 1-5; https://doi.org/10.36937/ben.2022.4547. Search in Google Scholar

[38] Robert U.W., Etuk S.E., Agbasi O.E., Ekong S.A., Abdulrazzaq Z.T., Anonaba A.U. (2021): Investigation of Thermal and Strength Properties of Composite Panels fabricated with Plaster of Paris for Insulation in Buildings, International Journal of Thermophysics, 42(2);25; https://doi.org/10.1007/s10765-020-02780-y. Search in Google Scholar

[39] ASTM D790 (2017): Standard Test Methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials, ASTM International, West Conshohocken, PA. Search in Google Scholar

[40] European Pharmacopeia 6.0 (2008): Chapter 2.9.36, Powder Flow, p. 321. Search in Google Scholar

[41] Carr R.L. (1965): Evaluating flow properties of solids, Chemical Engineering, 72; 163-168. Search in Google Scholar

[42] Akinyemi A.B., Afolayan J.O., Oluwatobi E.O. (2016): Some Properties of Composite Corn Cob and Sawdust particleboards, Construction and Building Materials, 127; 436-441; https://dx.doi.org/10.1016/j.conbuildmat.2016.10.040. Search in Google Scholar

[43] EN312 (2010): Particleboards specifications, European Committee for Standardisation, Brussels, Belgium. Search in Google Scholar

[44] Rajput E.R.E. (2015): Heat and Mass Transfer, 6 ^th Revised edn., S. Chand & Company PVT ltd, Ram Nagar, New Delhi, p. 15. Search in Google Scholar

[45] Gesa F.N., Atser A.R., Aondoakaa I.S. (2014): Investigation of the thermal insulation properties of selected ceiling materials used in Markurdi metropolis (Benue State – Nigeria), American Journal of Engineering Research, 3(11): 245-250. Search in Google Scholar

[46] Isheni Y., Yahaya B.S., Mbishida M.A., Achema F., KarfeGayus S. (2017): Production of Agro Waste Composite Ceiling Board (A Case Study of the Mechanical Properties), Journal of Scientific and Engineering Research, 4(6); 208-212. Search in Google Scholar