Four binary polymer -solvent systems, poly(styrene)-tetrahydrofuran, poly(styrene) - p-xylene, poly(methyl methacrylate) - ethylbenzene and poly(methyl methacrylate) - tetrahydrofuran, systems have been studied. It has been observed that thicker coatings will retain a higher amount of the residual solvent as compared to thinner coatings. In the case of poly(styrene)-tetrahydrofuran coating residual solvent remaining within the coatings were 9.09% and 4.74% for the coatings of the thicknesses of 967 micron and 559 micron, respectively. Similar trends were also observed in the case of poly(methyl methacrylate)-ethylbenzene, poly(methyl methacrylate)-tetrahydrofuran, and poly(styrene)-p-xylene systems.