Relationship between Porosity-Ultrasonic Pulse Velocity and Water Absorption of Concrete Containing Plastic and Rubber Waste by Full Factor Desing

[1]Aziz, P L., & Abdulkadir, M. R. (2022). Mechanical Properties and Flexural Strength of Reinforced Concrete Beams Containing Waste Material as Partial Replacement for Coarse Aggregates. International Journal of Concrete Structures and Materials, 16(1).Search in Google Scholar

[2]Daghistani, F., Baghbani, A., Naga, H. A., & Faradonbeh, R. S. (2023). Internal Friction Angle of Cohesionless Binary Mixture Sand–Granular Rubber Using Experimental Study and Machine Learning. Geosciences, 13, 7–197. https://doi.org/10.3390/geosciences13070197Search in Google Scholar

[3]Meles, D., Bayat, A., & Chan, D. (2013). One-dimensional compression model for tire-derived aggregate using large-scale testing apparatus. International Journal of Geotechnical Engineering, 8(2), 197–204. https://doi.org/10.1179/1939787913y.0000000019Search in Google Scholar

[4]Rouhanifar, S., & Ibraim, E. (2015). Laboratory investigation on the mechanics of soft-rigid soil mixtures. 1073–1080. https://doi.org/10.3233/978-1-61499-601-9-1073Search in Google Scholar

[5]Lamba, P., Kaur, D. P., Raj, S., & Sorout, J. (2021). Recycling/reuse of plastic waste as construction material for sustainable development: a review. Environmental Science and Pollution Research International, 29(57), 86156–86179. https://doi.org/10.1007/s11356-021-16980-ySearch in Google Scholar

[6]Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M., Baharom, S., & Azimi, M. (2016). Strength prediction of rotary brace damper using MLR and MARS. STRUCTURAL ENGINEERING AND MECHANICS, 60(3), 471–488. https://doi.org/10.12989/sem.2016.60.3.471Search in Google Scholar

[7]Kou, S., Lee, G., Poon, C., & Lai, W. (2009). Properties of lightweight aggregate concrete prepared with PVC granules derived from scraped PVC pipes. Waste Management, 29(2), 621–628. https://doi.org/10.1016/j.wasman.2008.06.014Search in Google Scholar

[8]Senhadji, Y., Escadeillas, G., Benosman, A., Mouli, M., Khelafi, H., & Ould Kaci, S. (2015). Effect of incorporating PVC waste as aggregate on the physical, mechanical, and chloride ion penetration behavior of concrete. Journal of Adhesion Science and Technology, 29(7), 625–640. https://doi.org/10.1080/01694243.2014.1000773Search in Google Scholar

[9]Haghighatnejad, N., Mousavi, S. Y., Khaleghi, S. J., Tabarsa, A., & Yousefi, S. (2016). Properties of recycled PVC aggregate concrete under different curing conditions. Construction and Building Materials, 126, 943–950. https://doi.org/10.1016/j.conbuildmat.2016.09.047Search in Google Scholar

[10]Gesoglu, M., Güneyisi, E., Hansu, O., Etli, S., & Alhassan, M. (2017). Mechanical and fracture characteristics of self-compacting concretes containing different percentage of plastic waste powder. Construction and Building Materials, 140, 562–569. 140, 562–569. https://doi.org/10.1016/j.conbuildmat.2017.02.139Search in Google Scholar

[11]Najjar, A.M. K., Basha, E. A., & Bashaand, Milad, M.B.K. (2013). Rigid polyvinyl chloride waste for partial replacement of natural coarse aggregate in concrete mixture. Int. J. Chem. Environ. Eng, 4 (6) 399–403.Search in Google Scholar

[12]Aly, A. M., El-Feky, M., Kohail, M., & Nasr, E. S. A. (2019). Performance of geopolymer concrete containing recycled rubber. Construction and Building Materials, 207, 136–144. https://doi.org/10.1016/j.conbuildmat.2019.02.121Search in Google Scholar

[13]Guo, S., Dai, Q., Si, R., Sun, X., & Lu, C. (2017). Evaluation of properties and performance of rubber-modified concrete for recycling of waste scrap tire. Journal of Cleaner Production, 148, 681–689. https://doi.org/10.1016/j.jclepro.2017.02.046Search in Google Scholar

[14]Senhadji, Y., Escadeillas, G., Benosman, A., Mouli, M., Khelafi, H., & Ould Kaci, S. (2015). Effect of incorporating PVC waste as aggregate on the physical, mechanical, and chloride ion penetration behavior of concrete. Journal of Adhesion Science and Technology, 29(7), 625–640. https://doi.org/10.1080/01694243.2014.1000773Search in Google Scholar

[15]Akçaözoğlu, S., Atiş, C. D., & Akçaözoğlu, K. (2010). An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete. Waste Management, 30(2), 285–290. https://doi.org/10.1016/j.wasman.2009.09.033Search in Google Scholar

[16]Saikia, N., & de Brito, J. (2012). Use of plastic waste as aggregate in cement mortar and concrete preparation: A review. Construction and Building Materials, 34, 385–401. https://doi.org/10.1016/j.conbuildmat.2012.02.066Search in Google Scholar

[17]Colangelo, F., Cioffi, R., Liguori, B., & Iucolano, F. (2016). Recycled polyolefins waste as aggregates for lightweight concrete. Composites. Part B, Engineering, 106, 234–241. https://doi.org/10.1016/j.compositesb.2016.09.041Search in Google Scholar

[18]Coppola, B., Courard, L., Michel, F., Incarnato, L., Scarfato, P., & Di Maio, L. (2018). Hygro-thermal and durability properties of a lightweight mortar made with foamed plastic waste aggregates. Construction and Building Materials, 170, 200–206. https://doi.org/10.1016/j.conbuildmat.2018.03.083Search in Google Scholar

[19]Albano, C., Camacho, N., Hernandez, M., Matheus, A., & Gutiérrez, A. (2009). Influence of content and particle size of waste pet bottles on concrete behavior at different w/c ratios. Waste Management, 29(10), 2707–2716. https://doi.org/10.1016/.wasmaan.2009.05.007Search in Google Scholar

[20]Kou, S., Lee, G., Poon, C., & Lai, W. (2009). Properties of lightweight aggregate concrete prepared with PVC granules derived from scraped PVC pipes. Waste Management, 29(2), 621–628. https://doi.org/10.1016/j.wasman.2008.06.014Search in Google Scholar

[21]Senthil Kumar, K., Gandhimathi, R., & Baskar, K. (2016). Assessment of Heavy Metals in Leachate of Concrete Made With E-Waste Plastic. Advances in Civil Engineering Materials, 5(1), 256–262. https://doi.org/10.1520/acem20160003Search in Google Scholar

[22]Chidiac, S., & Mihaljevic, S. (2011). Performance of dry cast concrete blocks containing waste glass powder or polyethylene aggregates. Cement and Concrete Composites, 33(8), 855–863. https://doi.org/10.1016/j.cemconcomp.2011.05.004Search in Google Scholar

[23]Kumar, R., & Dev, N. (2021). Mechanical and Microstructural Properties of Rubberized Concrete After Surface Modification of Waste Tire Rubber Crumb. Arabian Journal for Science and Engineering, 47(4), 4571–4587. https://doi.org/10.1007/s13369-021-06154-wSearch in Google Scholar

[24]Djebien, R., Bouabaz, A., & Abbas, Y. (2022). Effect of Recycled Tire Rubber and Marble Waste on Fresh and Hardened Properties of Concrete. Civil and Environmental Engineering Reports, 32(1), 218–239. https://doi.org/10.2478/ceer-2022-0013Search in Google Scholar

[25]Si, R., Wang, J., Guo, S., Dai, Q., & Han, S. (2018). Evaluation of laboratory performance of self-consolidating concrete with recycled tire rubber. Journal of Cleaner Production, 180, 823–831. https://doi.org/10.1016/j.jclepro.2018.01.180Search in Google Scholar

[26]Ramdani, S., Guettala, A., Benmalek, M., & Aguiar, J. B. (2019). Physical and mechanical performance of concrete made with waste rubber aggregate, glass powder and silica sand powder. Journal of Building Engineering, 21, 302–311. https://doi.org/10.1016/j.jobe.2018.11.003Search in Google Scholar

[27]Khan Raja, Bilal Nasar., & Khitab, Anwar. (2020). Enhancing Physical, Mechanical and Thermal Properties of Rubberized Concrete. In: Engineering and Technology Quarterly Reviews, Vol.3, No.1, 33-45. https://www.asianinstituteofresearch.org/Search in Google Scholar

[28]Uratsinze, A., & Garros, M. (2008). On the modulus of elasticity and strain capacity of Self-Compacting Concrete incorporating rubber aggregates. Resources, Conservation and Recycling, 52(10), 1209–1215. https://doi.org/10.1016/j.resconrec.2008.06.012Search in Google Scholar

[29]Gupta, T., Chaudhary, S., & Sharma, R. K. (2014). Assessment of mechanical and durability properties of concrete containing waste rubber tire as fine aggregate. Construction and Building Materials, 73, 562–574. https://doi.org/10.1016/j.conbuildmat.2014.09.102Search in Google Scholar

[30]Yilmaz, A., & Degirmenci, N. (2009). Possibility of using waste tire rubber and fly ash with Portland cement as construction materials. Waste Management, 29(5), 1541–1546. https://doi.org/10.1016/j.wasman.2008.11.002Search in Google Scholar

[31]Ganjian, E., Khorami, M., & Maghsoudi, A. A. (2009). Scrap-tyre-rubber replacement for aggregate and filler in concrete. Construction and Building Materials, 23(5), 1828–1836. https://doi.org/10.1016/j.conbuildmat.2008.09.020Search in Google Scholar

[32]Thomas, B. S., & Gupta, R. C. (2016). A comprehensive review on the applications of waste tire rubber in cement concrete. Renewable & Sustainable Energy Reviews, 54, 1323–1333. https://doi.org/10.1016/j.rser.2015.10.092Search in Google Scholar

[33]Thomas, B. S., Gupta, R. C., Kalla, P., & Cseteneyi, L. (2014). Strength, abrasion and permeation characteristics of cement concrete containing discarded rubber fine aggregates. Construction and Building Materials, 59, 204–212. https://doi.org/10.1016/j.conbuildmat.2014.01.074Search in Google Scholar

[34]Azimi-Pour, M., & Eskandari-Naddaf, H. (2020). Synergistic effect of colloidal nano and micro-silica on the microstructure and mechanical properties of mortar using full factorial design. Construction and Building Materials, 261, 120497. https://doi.org/10.1016/j.conbuildmat.2020.120497Search in Google Scholar

[35]Mutuk, T., & Mesci, B. (2014). Analysis of mechanical properties of cement containing boron waste and rice husk ash using full factorial design. Journal of Cleaner Production, 69, 128–132. https://doi.org/10.1016/j.jclepro.2014.01.051Search in Google Scholar

[36]Belmouhoub, A., Abdelouahed, A., & Noui, A. (2023). Experimental and factorial design of the mechanical and physical properties of concrete containing waste rubber powder. Research on Engineering Structures and Materials. https://doi.org/10.17515/resm2023.54me0810rsSearch in Google Scholar

[37]Najim, K. B., & Hall, M. R. (2012). Mechanical and dynamic properties of self-compacting crumb rubber modified concrete. Construction and Building Materials, 27(1), 521–530. https://doi.org/10.1016/j.conbuildmat.2011.07.013Search in Google Scholar

[38]Belmokaddem, M., Mahi, A., Senhadji, Y., & Pekmezci, B. Y. (2020). Mechanical and physical properties and morphology of concrete containing plastic waste as aggregate. Construction and Building Materials, 257, 119559. https://doi.org/10.1016/j.conbuildmat.2020.119559Search in Google Scholar

[39]Hannawi, K., Kamali-Bernard, S., & Prince, W. (2010). Physical and mechanical properties of mortars containing PET and PC waste aggregates. Waste Management, 30(11), 2312–2320. https://doi.org/10.1016/j.wasman.2010.03.028Search in Google Scholar

[40]Silva, R., de Brito, J., & Saikia, N. (2013). Influence of curing conditions on the durability-related performance of concrete made with selected plastic waste aggregates. Cement and Concrete Composites, 35(1), 23–31. https://doi.org/10.1016/j.cemconcomp.2012.08.017Search in Google Scholar

[41]Gupta, T., Siddique, S., Sharma, R. K., & Chaudhary, S. (2021). Investigating mechanical properties and durability of concrete containing recycled rubber ash and fibers. Journal of Material Cycles and Waste Management, 23(3), 1048–1057. https://doi.org/10.1007/s10163-021-01192-wSearch in Google Scholar

[42]Nanes, B. A. (2015). Slide Set: Reproducible image analysis and batch processing with ImageJ. BioTechniques, 59(5), 269–278. https://doi.org/10.2144/0001Search in Google Scholar