This work is licensed under the Creative Commons Attribution 4.0 International License.
Butra J, Dębkowski R, Matusz C, Serafin M. Research on the behavior of the rock mass during the experimental exploitation with the longwall method in the A5/1, Polkowice-Sieroszowice copper mine. CUPRUM – Scientific and Technical Journal of Ore Mining, V. 1 (74) 2015, pp. 23–40 (in Polish).ButraJDębkowskiRMatuszCSerafinMResearch on the behavior of the rock mass during the experimental exploitation with the longwall method in the A5/1, Polkowice-Sieroszowice copper mine17420152340(in Polish).Search in Google Scholar
Konopko W, Piernikarczyk A. Concept of the extraction technology for thin copper deposits. CUPRUM – CUPRUM – Scientific and Technical Journal of Ore Mining, V. 4 (73) 2014, pp. 17–33 (in Polish).KonopkoWPiernikarczykAConcept of the extraction technology for thin copper deposits47320141733(in Polish).Search in Google Scholar
Ziętkowski L, Młynarczyk J. Mechanical mining of hard rock using shearer in the KGHM copper mines. Inżynieria Maszyn 2014, V 19 (2) (in Polish).ZiętkowskiLMłynarczykJMechanical mining of hard rock using shearer in the KGHM copper mines2014192(in Polish).Search in Google Scholar
FLAC3D, Version 5.0, Itasca Consulting Group Inc., Minneapolis (2012); software available at www.itascacg.com.FLAC3D, Version 5.0, Itasca Consulting Group Inc.2012software available at www.itascacg.com.Search in Google Scholar
Wang JC, Wang ZH. Systematic principles of surrounding rock control in longwall mining within thick coal seams. Int. J. of Min. Sci. and Technol. 2018. V. 29 (1), pp. 65–71. DOI: 10.1016/j.ijmst.2018.11.014.WangJCWangZHSystematic principles of surrounding rock control in longwall mining within thick coal seams2018291657110.1016/j.ijmst.2018.11.014Open DOISearch in Google Scholar
Wang JC, Yang SL, Kong DZ. Failure mechanism and control technology of longwall coalface in large-cutting-height mining method. Int. J. Min. Sci. Technol. 2015, 26 (1), pp. 111–118. DOI: 10.1016/j.ijmst.2015.11.018.WangJCYangSLKongDZFailure mechanism and control technology of longwall coalface in large-cutting-height mining method201526111111810.1016/j.ijmst.2015.11.018Open DOISearch in Google Scholar
Bai QS, Tu SH, Li ZX, Tu HS. Theoretical analysis on the deformation characteristics of coal wall in a longwall top coal caving face. Int. J. Min. Sci. Technol. 2015, 25 (2), pp. 199–204. DOI: 10.1016/j.ijmst.2015.02.006.BaiQSTuSHLiZXTuHSTheoretical analysis on the deformation characteristics of coal wall in a longwall top coal caving face201525219920410.1016/j.ijmst.2015.02.006Open DOISearch in Google Scholar
Bai QS, Tu SH, Chen M, Zhang C. Numerical modelling of coal wall spall in a longwall face. Int. J. of Rock Mech. and Min. Sci. 2016, V. 88, pp. 242–253. DOI: 10.1016/j.ijrmms.2016.07.031.BaiQSTuSHChenMZhangCNumerical modelling of coal wall spall in a longwall face20168824225310.1016/j.ijrmms.2016.07.031Open DOISearch in Google Scholar
Li XM, Wang ZH, Zhang JW. Stability of roof structure and its control in steeply inclined coal seams. Int. J. Min. Sci. Technol. 2017, 27 (2), pp. 359–364. DOI: 10.1016/j.ijmst.2017.01.018.LiXMWangZHZhangJWStability of roof structure and its control in steeply inclined coal seams201727235936410.1016/j.ijmst.2017.01.018Open DOISearch in Google Scholar
Xin YJ, Gou PF, Ge FD. Analysis of stability of support and surrounding rock in mining top coal of inclined coal seam. Int. J. Min. Sci. Technol. 2014, 24 (1), pp. 63–68. DOI: 10.1016/j.ijmst.2013.12.011.XinYJGouPFGeFDAnalysis of stability of support and surrounding rock in mining top coal of inclined coal seam2014241636810.1016/j.ijmst.2013.12.011Open DOISearch in Google Scholar
Prusek S, Rajwa S, Wrana A, Krzemień A. Assessment of roof fall risk in longwall coal mines, International Journal of Mining, Reclamation and Environment 2017, 31:8, 558–574. DOI: 10.1080/17480930.2016.1200897.PrusekSRajwaSWranaAKrzemieńAAssessment of roof fall risk in longwall coal mines201731855857410.1080/17480930.2016.1200897Open DOISearch in Google Scholar
Masny W. Powered support in dynamic load conditions – numerical analysis. Archives of Mining Sciences 2020, Vol. 65 No 3, s.453–468. DOI: 10.24425/ams.2020.134129.MasnyWPowered support in dynamic load conditions – numerical analysis2020653s.45346810.24425/ams.2020.134129Open DOISearch in Google Scholar
Islavath SR, Deb D, Kumar H. Life cycle analysis and damage prediction of a longwall powered support using 3D numerical modelling techniques. Arab. J. of Geosci. 2019, 12:441. DOI: 10.1007/s12517-019-4574-y.IslavathSRDebDKumarHLife cycle analysis and damage prediction of a longwall powered support using 3D numerical modelling techniques20191244110.1007/s12517-019-4574-yOpen DOISearch in Google Scholar
Rajwa S, Janoszek T, Prusek S. Influence of canopy ratio of powered roof support on longwall working stability – A case study. Int. J. of Min. Sci. and Technol. 2019, 29(4). DOI: 10.1016/j.ijmst.2019.06.002.RajwaSJanoszekTPrusekSInfluence of canopy ratio of powered roof support on longwall working stability – A case study201929410.1016/j.ijmst.2019.06.002Open DOISearch in Google Scholar
Witek M, Prusek S. Numerical calculations of shield support stress based on laboratory test results. Computers and Geotechnics 2016, 72:74–88. DOI: 10.1016/j.compgeo.2015.11.007.WitekMPrusekSNumerical calculations of shield support stress based on laboratory test results201672748810.1016/j.compgeo.2015.11.007Open DOISearch in Google Scholar
Bai QS, Tu SH, Zhang XG. Numerical modelling on brittle failure of coal wall in longwall face – a case study. Arab. J. Geosci. 2014, 7: 5067–5080. DOI: 10.1007/s12517-013-1181-1.BaiQSTuSHZhangXGNumerical modelling on brittle failure of coal wall in longwall face – a case study201475067508010.1007/s12517-013-1181-1Open DOISearch in Google Scholar
Verma AK, Deb D. Numerical Analysis of an Interaction between Hydraulic-Powered Support and Surrounding Rock Strata. Int. J. of Geomech. 2013, V. 13 (2). DOI: 10.1061/(ASCE)GM.1943-5622.0000190.VermaAKDebDNumerical Analysis of an Interaction between Hydraulic-Powered Support and Surrounding Rock Strata201313210.1061/(ASCE)GM.1943-5622.0000190Open DOISearch in Google Scholar
Singh GSP, Singh UK. Prediction of caving behaviour of strata and optimum rating of hydraulic powered support for longwall workings. Int. J. of Rock Mech.and Min. Sci. 2010, 47(1): 1–16. DOI: 10.1016/j.ijrmms.2009.09.001.SinghGSPSinghUKPrediction of caving behaviour of strata and optimum rating of hydraulic powered support for longwall workings201047111610.1016/j.ijrmms.2009.09.001Open DOISearch in Google Scholar
Trueman R, Lyman G, Cocker A. Longwall roof control through a fundamental understanding of shield–strata interaction. International Journal of Rock Mechanics and Mining Sciences 2009, 46(2): 371–380. DOI: 10.1016/j.ijrmms.2008.07.003.TruemanRLymanGCockerALongwall roof control through a fundamental understanding of shield–strata interaction200946237138010.1016/j.ijrmms.2008.07.003Open DOISearch in Google Scholar
Biliński A. Method of selection of longwall face and roadway supports for the panelling conditions; 2005.BilińskiA2005Search in Google Scholar
Janoszek T. The Assessment of longwall working stability based on the Mohr-Coulomb stress criterion – Numerical Analysis. Archives of Mining Sciences 2020, V. 65 (3), pp. 493–509. DOI: 10.24425/ams.2020.134131.JanoszekTThe Assessment of longwall working stability based on the Mohr-Coulomb stress criterion – Numerical Analysis202065349350910.24425/ams.2020.134131Open DOISearch in Google Scholar
Song G, Chugh YP, Wang J. A numerical modelling study of longwall face stability in mining thick coal seams in Chin. Int. J. Mining and Mineral Engineering 2017, Vol. 8, No. 1, pp.35–55. DOI: 10.1504/IJMME.2017.10003216.SongGChughYPWangJA numerical modelling study of longwall face stability in mining thick coal seams in Chin201781355510.1504/IJMME.2017.10003216Open DOISearch in Google Scholar
Cai M, Morioka H, Kaiser PK, Tasaka Y, Kurose H, Minami M, Maejima T. Back-analysis of rock mass strength parameters using AE monitoring data. Int. J. of Rock Mech. and Min. Sci. 2007, V. 44 (4), pp. 538–549. DOI: 10.1016/j.ijrmms.2006.09.012.CaiMMoriokaHKaiserPKTasakaYKuroseHMinamiMMaejimaTBack-analysis of rock mass strength parameters using AE monitoring data200744453854910.1016/j.ijrmms.2006.09.012Open DOISearch in Google Scholar
Gioda G, Sakurai S. Back-analysis procedures for the interpretation of field measurements in geomechanics. Int. J. Numer. Anal. Methods Geomech., 1987, 11, pp. 555–583. DOI: 10.1002/nag.1610110604.GiodaGSakuraiSBack-analysis procedures for the interpretation of field measurements in geomechanics19871155558310.1002/nag.1610110604Open DOISearch in Google Scholar
Kaiser PK, Zou D, Lang PA. Stress determination by back-analysis of excavation-induced stress changes—a case study. Rock Mech. Rock Eng. 1990, 23 (3), pp. 185–200. DOI: 10.1007/BF01022953.KaiserPKZouDLangPAStress determination by back-analysis of excavation-induced stress changes—a case study199023318520010.1007/BF01022953Open DOISearch in Google Scholar
Sakurai S, Akutagawa S, Takeuchi K, Shinji M, Shimizu N. Back-analysis for tunnel engineering as a modern observational method. Tunnelling Underground Space Technology. 2003, 18 (2), pp. 185–196. DOI: 10.1016/S0886-7798(03)00026-9.SakuraiSAkutagawaSTakeuchiKShinjiMShimizuNBack-analysis for tunnel engineering as a modern observational method200318218519610.1016/S0886-7798(03)00026-9Open DOISearch in Google Scholar
Ceryan N, Kesimal A, Ceryan S. Chapter 13 - Probabilistic Analysis Applied to Rock Slope Stability: A Case Study From Northeast Turkey. Integrating Disaster Science and Management Global Case Studies in Mitigation and Recovery 2018 Ed. P. Samui, D. Kim, C. Ghosh, pp. 221–261.CeryanNKesimalACeryanSChapter 13 - Probabilistic Analysis Applied to Rock Slope Stability: A Case Study From Northeast TurkeyEd.SamuiP.KimD.GhoshC.22126110.1016/B978-0-12-812056-9.00013-0Search in Google Scholar
Bakhtiyari E, Almasi A, Cheshomi A, Hassanpour J. Determination of Shear Strength Parameters of Rock Mass using Back Analysis Methods and Comparison of Results with Empirical Methods. EJERS, European Journal of Engineering Research and Science 2017, Vol. 2, No. 11. DOI: 10.24018/ejers.2017.2.11.518.BakhtiyariEAlmasiACheshomiAHassanpourJDetermination of Shear Strength Parameters of Rock Mass using Back Analysis Methods and Comparison of Results with Empirical Methods201721110.24018/ejers.2017.2.11.518Open DOISearch in Google Scholar
Kim YT, Lee SR. An equivalent model and back-analysis technique for modelling in situ consolidation behavior of drainage-installed soft deposits. Computers and Geotechnics 1997, Volume 20, Issue 2, pp. 125–142. DOI: 10.1016/S0266-352X(96)00016-X.KimYTLeeSRAn equivalent model and back-analysis technique for modelling in situ consolidation behavior of drainage-installed soft deposits199720212514210.1016/S0266-352X(96)00016-XOpen DOISearch in Google Scholar
Wu Y, Yuan H, Zhang B, Zhang Z, Yu Y. Displacement-Based Back-Analysis of the Model Parameters of the Nuozhadu High Earth-Rockfill Dam. Scientific World Journal 2014, No: 292450. DOI: 10.1155/2014/292450.WuYYuanHZhangBZhangZYuYDisplacement-Based Back-Analysis of the Model Parameters of the Nuozhadu High Earth-Rockfill Dam2014No: 292450.10.1155/2014/292450Open DOISearch in Google Scholar
Fakhimi A, Salehi D, Mojtabai N. Numerical back analysis for estimation of soil parameters in the Resalat Tunnel project. Tunnelling and Underground Space Technology 2004, 19(1):57–67. DOI: 10.1016/S0886-7798(03)00087-7.FakhimiASalehiDMojtabaiNNumerical back analysis for estimation of soil parameters in the Resalat Tunnel project2004191576710.1016/S0886-7798(03)00087-7Open DOISearch in Google Scholar
Pu Y, Apel DB, Prusek S, Walentek A, Cichy T. Back-analysis for initial ground stress field at a diamond mine using machine learning approaches. Nat. Hazards 2020. DOI: 10.1007/s11069-020-04304-1.PuYApelDBPrusekSWalentekACichyTBack-analysis for initial ground stress field at a diamond mine using machine learning approaches202010.1007/s11069-020-04304-1Open DOISearch in Google Scholar
Cichy T, Prusek S, Świątek J, Apel D, Pu Y. Use of Neural Networks to Forecast Seismic Hazard Expressed by Number of Tremors Per Unit of Surface. Pure Appl. Geophys., 2020. DOI: 10.1007/s00024-020-02602-0.CichyTPrusekSŚwiątekJApelDPuYUse of Neural Networks to Forecast Seismic Hazard Expressed by Number of Tremors Per Unit of Surface202010.1007/s00024-020-02602-0Open DOISearch in Google Scholar
Sakurai S. Back analysis in Rock Engineering. International society for Rock mechanics. ISRM book series, 2017, p. 226.SakuraiSISRM book series,201722610.1201/9781315375168Search in Google Scholar
Hoek E, Brown ET. Practical estimates of rock mass strength. Int. J. of Rock Mech. and Min. Sci. 1997, 34, 8, pp. 1165–1186. DOI: 10.1016/S1365-1609(97)80069-X.HoekEBrownETPractical estimates of rock mass strength19973481165118610.1016/S1365-1609(97)80069-XOpen DOISearch in Google Scholar
Wilson AH. A method of estimating the closure and strength of lining required in drivages surrounded by a yield zone. Int. J. Rock Mech. Min. Sci. and Geomech. Abstr., 1980, p. 349–355. DOI: 10.1016/0148-9062(80)90518-5.WilsonAHA method of estimating the closure and strength of lining required in drivages surrounded by a yield zone198034935510.1016/0148-9062(80)90518-5Open DOISearch in Google Scholar
Schullera H, Schweiger HF. Application of a multilaminate model to simulation of shear band formation in NATM-tunnelling. Comput. Geotech. 2002, 29(7): 501–524. DOI: 10.1016/S0266-352X(02)00013-7.SchulleraHSchweigerHFApplication of a multilaminate model to simulation of shear band formation in NATM-tunnelling200229750152410.1016/S0266-352X(02)00013-7Open DOISearch in Google Scholar
Mortazavi A, Hassani FP, Shabani M. A numerical investigation ofrock pillar failure mechanism in underground openings. Comput. Geotech. 2009, 36(5): 691–697. DOI: 10.1016/j.compgeo.2008.11.004.MortazaviAHassaniFPShabaniMA numerical investigation ofrock pillar failure mechanism in underground openings200936569169710.1016/j.compgeo.2008.11.004Open DOISearch in Google Scholar
Edelbro C. Different approaches for simulating brittle failure in two hard rock mass cases: a parametric study. Rock Mech. Rock Eng., 2010, 43(2):151–165. DOI: 10.1007/s00603-008-0025-x.EdelbroCDifferent approaches for simulating brittle failure in two hard rock mass cases: a parametric study201043215116510.1007/s00603-008-0025-xOpen DOISearch in Google Scholar
Wang SY, Sloan SW, Huang ML, Tang CA. Numerical study of failure mechanism of serial and parallel rock pillars. Rock Mech. Rock Eng., 2011a, 44:179–198. DOI: 10.1007/s00603-010-0116-3.WangSYSloanSWHuangMLTangCANumerical study of failure mechanism of serial and parallel rock pillars2011a4417919810.1007/s00603-010-0116-3Open DOISearch in Google Scholar
Wang SL, Zheng H, Li CG, Ge XR. A finite element implementation of strain-softening rock mass. Int. J. Rock Mech. Min. Sci., 2011b, 48:67–76. DOI: 10.1016/j.ijrmms.2010.11.001.WangSLZhengHLiCGGeXRA finite element implementation of strain-softening rock mass2011b48677610.1016/j.ijrmms.2010.11.001Open DOISearch in Google Scholar