1. bookVolume 70 (2020): Issue 2 (November 2020)
Journal Details
License
Format
Journal
First Published
16 Apr 2016
Publication timeframe
2 times per year
Languages
English
access type Open Access

Comparative Analysis of Simulation Results of Hard-to-Cut Materials Machining by Coated Cutting Tools

Journal Details
License
Format
Journal
First Published
16 Apr 2016
Publication timeframe
2 times per year
Languages
English
Abstract

The article describes the system approach to simulation the process of machining hard-to-cut materials using tools with wear-resistant coatings. In addition to increasing the wear resistance of the tool, factors such as thermal state model, load parameters and friction behavior at the tool-chip interface have been analyzed. A comparative analysis of these parameters is described in the article. It has been proven that the greatest wear of the cutting edge does not occur on the top of the tool, but in the area where the chip speed along the rake face of the cutting insert is greatest.

Keywords

[1] Kishawy, H.A., Hosseini. “Machining Difficult-to-Cut Materials. Basic Principles and Challenges”, Verlag: Springer International Publishing, Berlin, Germany, 2019. DOI:10.1007/978-3-319-95966-5 Search in Google Scholar

[2] Wojciechowski, S., Królczyk, G. M, Andradosław, Maruda, A. W. “Advances in Hard– to–Cut Materials: Manufacturing, Properties, Process Mechanics and Evaluation of Surface Integrity”, Printed Edition of the Special Issue Published in Materials, MDPI, Basel, Switzerland, 2020. DOI:10.3390/books978-3-03928-355-2 Search in Google Scholar

[3] Davim, J. P. “Machining of Hard Materials”, Springer-Verlag, London, England, 2011. DOI:10.1007/978-1-84996-450-0 Search in Google Scholar

[4] Grzesik, W. “Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications”, Springer, London, England, 2017. DOI:10.1016/B978-0-08-044534-2.X5001-2 Search in Google Scholar

[5] Mostaghimi, J., Chandra, S., Ghafouri-Azar, R., Dolatabadi, A. “Modeling thermal spray coating processes: a powerful tool in design and optimization”, Surface and Coatings Technology 163 – 164, pp. 1 – 11, 2003. DOI:10.1016/S0257-8972(02)00686-2 Search in Google Scholar

[6] Bouzakis, K.-D., Michailidis, N., Skordarisa, G., Bouzakis, E., Biermann, D., M’Saoubi, R. “Cutting with coated tools: Coating technologies, characterization methods and performance optimization”, CIRP Annals 61 (2), pp. 703 – 723, 2012. DOI: 10.1016/j.cirp.2012.05.006. Search in Google Scholar

[7] Klocke, F., Krieg T. “Coated Tools for Metal Cutting – Features and Applications”, CIRP Annals 48 (2), pp. 515 – 525, 1999. DOI: 10.1016/S0007-8506(07)63231-4 Search in Google Scholar

[8] Kong, X., Yang, L., Zhang, H. “Cutting performance and coated tool wear mechanisms in laser-assisted milling K24 nickel-based superalloy”, International Journal of Advanced Manufacturing Technology 77, pp. 2151 – 2163, 2015. DOI: 10.1007/s00170-014-6606-9 Search in Google Scholar

[9] Binder, M., Klocke, F., Lung, D. “Tool wear simulation of complex shaped coated cutting tools”, Wears 330 – 331, pp. 600 – 607, 2015. DOI: 10.1016/j.wear.2015.01.015 Search in Google Scholar

[10] Yung-Chang Yen, Söhner, J., Lilly, B., Altana, T. “Estimation of tool wear in orthogonal cutting using the finite element analysis“, Journal of Materials Processing Technology 146 (1), pp. 82 – 91, 2004. DOI: 10.1016/S0924-0136(03)00847-1 Search in Google Scholar

[11] Kone, F., Czarnota, C., Haddag, B., Nouari, M. “Finite element modelling of the thermo-mechanical behavior of coatings under extreme contact loading in dry machining”, Surface and Coatings Technology 205 (12), pp. 3559 – 3566, 2011. DOI:10.1016/j.surfcoat.2010.12.024 Search in Google Scholar

[12] Kondala, D., Srinivasdr, K. “Comparision of Dominant Features Identification for Tool Wear in Hard Turning of Inconel 718 by Using Vibration Analysis”, Strojnícky časopis – Journal of Mechanical Engineering 69 (4), pp. 1 – 8, 2019. DOI: 10.2478/scjme-2019-0038 Search in Google Scholar

[13] Choudhury, A., Mondal, S. C., Sarkar, S. “Effect of lamination angle and thickness on analysis of composite plate under thermo mechanical loading”, Strojnícky časopis – Journal of Mechanical Engineering 67 (1), pp. 5 – 22, 2017. DOI: 10.1515/scjme-2017-0001 Search in Google Scholar

[14] Bošanský, M., Gondár, E., Švec, P., Toth, F., Protasov, R. A. “Study of Wear in Thin Coatings Applied to Convex-Concave Gearings”. Lubricants 8 (56), pp 1 – 14, 2020. DOI: 10.3390/lubricants8050056 Search in Google Scholar

[15] Bošanský, M., Tóth, F., Gulan, L., Rusnák, J., Furstenzeller, A. “Scuffing Resistance of 16MnCr5 HCR TiAlCN-Coated Gears”, In: Current Methods of Construction Design. Lecture Notes in Mechanical Engineering. Springer, Cham, Switzerland, pp. 445 – 452, 2020. DOI: 10.1007/978-3-030-33146-7_51 Search in Google Scholar

[16] Écsi, L., Jerábek R., Élesztős P. “Study On The ‘Compatiblity Assumption’ Of Contemporary Multiplicative Plasicity Models”, Strojnícky časopis – Journal of Mechanical Engineering 69 (2), pp. 15 – 26, 2019. DOI: 10.2478/scjme-2019-0015 Search in Google Scholar

[17] Stupnytskyy, V., Hrytsay, I. “Computer-Aided Conception for Planning and Researching of the Functional-Oriented Manufacturing Process”, In: Advanced Manufacturing Processes. InterPartner-2019. Lecture Notes in Mechanical Engineering, Springer, Cham, Switzerland, pp. 309 – 322, 2020. DOI: 10.1007/978-3-030-40724-7_32 Search in Google Scholar

[18] Constantin, C., Croitoru, S. M., Constantin, G., Străjescu, E. “FEM tools for cutting process modelling and simulation”, Scientific Bulletin, Series D: Mechanical Engineering 74 (4), pp. 149 – 162, 2012. Available at: https://www.researchgate.net/publication/234885540_FEM_tools_for_cutting_process_modelling_and_simulation Search in Google Scholar

[19] Yung-Chang Yena, Jörg S., Blaine, L., Taylan A. “Estimation of tool wear in orthogonal cutting using the finite element analysis”, Journal of Materials Processing Technology 146 (1), pp. 82 – 91, 2004. DOI: 10.1016/S0924-0136(03)00847-1 Search in Google Scholar

[20] Thamizhmanii, S., Sulaiman, H. “Machinability Study Using Chip Thickness Ratio on Difficult to Cut Metals by CBN Cutting Tool”, Key Engineering Materials s 504 – 506, pp. 1317 – 1322, 2012. DOI: 10.4028/www.scientific.net/kem.504-506.1317 Search in Google Scholar

[21] Hassan El-Hofy. “Fundamentals of Machining Processes: Conventional and Nonconventional Processes”, Taylor & Francis, Boca Raton, USA, 2014. DOI: 10.1201/978042944332 Search in Google Scholar

[22] Klocke, F. “Manufacturing Processes 1. Cutting”, RWTH, Springer-Verlag, Berlin-Heidelberg, Germany, 2011. DOI:10.1007/978-3-642-11979-8. Search in Google Scholar

[23] Hrytsay, I., Stupnytskyy, V., Topchii, V. “Improved Method of Gear Hobbing Computer Aided Simulation”. Archive of mechanical engineering 66 (4), pр. 475 – 494, 2019. DOI: 10.24425/ame.2019.131358. Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo