Application of the Methods for Comprehensive Reliability Analysis of District Heating Systems

[1] Lund H., et al. The status of 4th generation district heating: Research and results. Energy 2018:164:147–159. https://doi.org/10.1016/j.energy.2018.08.20610.1016/j.energy.2018.08.206Search in Google Scholar

[2] Vigants E., Prodanuks T., Vigants G., Veidenberg I., Blumberga D. Modelling of Technological Solutions 4th Generation DH Systems. Environmental and Climate Technologies 2017:20:5–23. https://doi.org/10.1515/rtuect-2017-000710.1515/rtuect-2017-0007Search in Google Scholar

[3] Volkova A., Masatin V., Siirde A. Methodology for evaluating the transition process dynamics towards 4th generation district heating networks. Energy 2018:150:253–261. https://doi.org/10.1016/j.energy.2018.02.12310.1016/j.energy.2018.02.123Search in Google Scholar

[4] Ziemele J., Gravelsins A., Blumberga A., Blumberga D. The effect of energy efficiency improvements on the development of 4th generation district heating. Energy Procedia 2016:95:522–527. https://doi.org/10.1016/j.egypro.2016.09.07910.1016/j.egypro.2016.09.079Search in Google Scholar

[5] Ziemele J., Gravelsins A., Blumberga A., Blumberga D. Combining energy efficiency at source and at consumer to reach 4th generation district heating: Economic and system dynamics analysis. Energy 2017:137:595–606. https://doi.org/10.1016/j.energy.2017.04.12310.1016/j.energy.2017.04.123Search in Google Scholar

[6] Sennova E. V., et al. Reliability of heat supply systems. Novosibirsk: Nauka, 2000.Search in Google Scholar

[7] Lisnianski A., Elmakias D., Hanoch B. H. A multi-state Markov model for a short-term reliability analysis of a power generating unit. Reliability engineering & system safety 2012:98:1–6. https://doi.org/10.1016/j.ress.2011.10.00810.1016/j.ress.2011.10.008Search in Google Scholar

[8] Shahhosseini A., Olamaei J. An efficient stochastic programming for optimal allocation of combined heat and power systems for commercial buildings using. Thermal Science and Engineering Progress 2019:11:133–141. https://doi.org/10.1016/j.tsep.2019.03.01610.1016/j.tsep.2019.03.016Search in Google Scholar

[9] Haghifam M., Manbachi M. Reliability and availability modelling of combined heat and power (CHP) systems. International journal of electrical power & energy systems 2011:33(3):385–393. https://doi.org/10.1016/j.ijepes.2010.08.03510.1016/j.ijepes.2010.08.035Search in Google Scholar

[10] Sabouhi H., Abbaspour A., Fotuhi-Firuzabad M., Dehghanian P. Reliability modeling and availability analysis of combined cycle power plants. International Journal of Electrical Power & Energy Systems 2016:79:108–119. https://doi.org/10.1016/j.ijepes.2016.01.00710.1016/j.ijepes.2016.01.007Search in Google Scholar

[11] Kumar P., Kumar Singh L., Kumar C. Performance evaluation of safety-critical systems of nuclear power plant systems. Nuclear Engineering and Technology 2020:52(3):560–67. https://doi.org/10.1016/j.net.2019.08.01810.1016/j.net.2019.08.018Search in Google Scholar

[12] Jiang J., Zhang L., Wang Y., Peng Y., Zhang K., He W. Markov reliability model research of monitoring process in digital main control room of nuclear power plant. Safety Science 2011:49(6):843–851. https://doi.org/10.1016/j.ssci.2011.01.01410.1016/j.ssci.2011.01.014Search in Google Scholar

[13] Wang J.-J., Fu C., Yang K., Zhang X.-T., Shi G., Zhai J. Reliability and availability analysis of redundant BCHP (building cooling, heating and power) system. Energy 2013:61:531–40. https://doi.org/10.1016/j.energy.2013.09.01810.1016/j.energy.2013.09.018Search in Google Scholar

[14] El-Nashar A. Optimal design of a cogeneration plant for power and desalination taking equipment reliability into consideration. Desalination 2008:229(1–3):21–32. https://doi.org/10.1016/j.desal.2007.07.02410.1016/j.desal.2007.07.024Search in Google Scholar

[15] Woo S., Nam Z. Semi-Markov reliability analysis of three test/repair policies for standby safety systems in a nuclear power plant. Reliability engineering & system safety 1991:31:1–30. https://doi.org/10.1016/0951-8320(91)90033-410.1016/0951-8320(91)90033-4Search in Google Scholar

[16] Korolyuk V. S., Turbin A. F. Semi-Markov processes and their applications. Kiev: Naukova Dumka, 1976.Search in Google Scholar

[17] Jiang J., Gao W., Wei X., Li Y., Kuroki S. Reliability and cost analysis of the redundant design of a combined cooling, heating and power (CCHP) system. Energy Conversion and Management 2019:199:111988. https://doi.org/10.1016/j.enconman.2019.11198810.1016/j.enconman.2019.111988Search in Google Scholar

[18] Wang J., You S., Zong Y., Chresten T., Dong Z. Y., Zhou Y. Flexibility of combined heat and power plants: A review of technologies and operation strategies. Applied Energy 2019:252:113445. https://doi.org/10.1016/j.apenergy.2019.11344510.1016/j.apenergy.2019.113445Search in Google Scholar

[19] Frangopoulos C. A., Dimopoulos G. G. Effect of reliability considerations on the optimal synthesis, design and operation of a cogeneration system. Energy 2004:29(3):309–329. https://doi.org/10.1016/S0360-5442(02)00031-210.1016/S0360-5442(02)00031-2Search in Google Scholar

[20] Buslenko N. P. Modeling of complex systems. Moscow: Nauka, 1978.Search in Google Scholar

[21] Shu L, Chen L., Jin J., Yu J., Sun F., Wu C. Functional reliability simulation for a power-station’s steam-turbine. Applied Energy 2005:80(1):61–66. https://doi.org/10.1016/j.apenergy.2004.02.00410.1016/j.apenergy.2004.02.004Search in Google Scholar

[22] Ahn H., Rim D., Pavlak G. S., Freihaut J. D. Uncertainty analysis of energy and economic performances of hybrid solar photovoltaic and combined cooling, heating, and power (CCHP+PV) systems using a Monte-Carlo method. Applied Energy 2019:255:113753. https://doi.org/10.1016/j.apenergy.2019.11375310.1016/j.apenergy.2019.113753Search in Google Scholar

[23] Khasilev V. Y., Takaishvili M. K. About fundamentals of the technique for calculation and redundancy of heat networks. Teploenergetika 1972:4:14–19.Search in Google Scholar

[24] Sennova E. V., Sidler V. G. Mathematical modeling and optimization of developing heat supply systems. Novosibirsk: Nauka, 1985.Search in Google Scholar

[25] Stennikov V. A., Postnikov I. V. Methodological support for a comprehensive analysis of fuel and heat supply reliability. In: Sustaining power resources through energy optimization and engineering, ed. by Vasant P., Voropai N. I. Hershey PA: Engineering science reference (an imprint of IGI Global), 2016. https://doi.org/10.4018/978-1-4666-9755-310.4018/978-1-4666-9755-3Search in Google Scholar

[26] Diakov A. F., et al. Reliability of energy systems: problems, models and methods for solving them. Novosibirsk: Nauka, 2014.Search in Google Scholar

[27] Merenkov A. P., Khasilev V. Ya. Theory of hydraulic circuits. Moscow: Nauka, 1985.Search in Google Scholar

[28] Ionin A. A. Reliability of heat network systems. Moscow: Strojizdat, 1989.Search in Google Scholar

[29] Valincius M., Zutautaite I., Dundulis G., Rimkevicius S., Janulionis R., Bakas R. Integrated assessment of failure probability of the district heating network. Reliability Engineering and System Safety 2015:133:314–322. https://doi.org/10.1016/j.ress.2014.09.02210.1016/j.ress.2014.09.022Search in Google Scholar

[30] Zorkaltsev V. I., Kolobov Y. I. A simulation model to study reliability of fuel supply to heat generating units. Bulletin of Komi branch of the USSR Academy of Sciences 1984:33–39.Search in Google Scholar

[31] Nekrasov A. S., Velikanov M. A., Gorunov P. V. Reliability of fuel supply to power plants: methods and models of studies. Moscow: Nauka, 1990,Search in Google Scholar

[32] Zorkaltsev V., Ivanova E. Intensity and synchronism of fluctuations in fuel demand for heating by economic region of the country. Bulletin of the USSR Academy of Sciences: Energy and transport 1990:6:14–22.Search in Google Scholar

[33] Sukharev M. G., et al. Reliability of gas and oil supply systems. Moscow: Nedra, 1994.Search in Google Scholar

[34] Rimkevicius S., Kaliatka A., Valincius M., Dundulis G., Janulionis R., Grybenas A., Zutautaite I. Development of approach for reliability assessment of pipeline network systems. Applied Energy 2012:94:22–33. https://doi.org/10.1016/j.apenergy.2012.01.01510.1016/j.apenergy.2012.01.015Search in Google Scholar

[35] Amirat A., Mohamed-Chateauneuf A., Chaoui K. Reliability assessment of underground pipelines under the combined effect of active corrosion and residual stress. International Journal of Pressure Vessels and Piping 2006:83(2):107–117. https://doi.org/10.1016/j.ijpvp.2005.11.00410.1016/j.ijpvp.2005.11.004Search in Google Scholar

[36] Adefarati T., Bansal R. C. Reliability assessment of distribution system with the integration of renewable distributed generation. Applied Energy 2017:185:158–171. https://doi.org/10.1016/j.apenergy.2016.10.08710.1016/j.apenergy.2016.10.087Search in Google Scholar

[37] Ramirez-Marquez J. E., Coit D. W. Multi-state component criticality analysis for reliability improvement in multi-state systems. Reliability Engineering and System Safety 2007:92:1608–1619. https://doi.org/10.1016/j.ress.2006.09.01410.1016/j.ress.2006.09.014Search in Google Scholar

[38] Stennikov V. A., Postnikov I. V. Methods for the integrated reliability analysis of heat supply. Power Technology and Engineering 2014:47(6):446–453. https://doi.org/10.1007/s10749-014-0467-010.1007/s10749-014-0467-0Search in Google Scholar

[39] Stennikov V. A., Postnikov I. V. Methods for comprehensive analysis of heat supply reliability. International journal of energy optimization and engineering 2013:2(4):120–142. https://doi.org/10.4018/ijeoe.201310010710.4018/ijeoe.2013100107Search in Google Scholar

[40] Stennikov V. A., Postnikov I. V. Comprehensive analysis of the heat supply reliability. Bulletin of Russian Academy of Sciences: Energy 2011:2:107–121.Search in Google Scholar

[41] Bukher F. S., et al. Study of operating modes and a feasibility study for the reconstruction of heating networks in the Shelekhov city taking into account the forecasting loads. Report on research work. Irkutsk: ESI SB RAS, 2008.Search in Google Scholar

[42] Sanitary regulations SNiP 23-01-99 “Construction climatology”. Moscow: State Committee of the Russian Federation for construction and housing and communal services, 2000.Search in Google Scholar

[43] Postnikov I., Stennikov V., Mednikova E., Penkovskii A. A methodology for optimization of component reliability of heat supply systems. Energy Procedia 2017:105:3083–3088. https://doi.org/10.1016/j.egypro.2017.03.64310.1016/j.egypro.2017.03.643Search in Google Scholar

[44] Postnikov I., Stennikov V., Mednikova E., Penkovskii A. Methodology for optimization of component reliability of heat supply systems. Applied Energy 2018:227:365–374. https://doi.org/10.1016/j.apenergy.2017.11.07310.1016/j.apenergy.2017.11.073Search in Google Scholar

[45] Postnikov I., Stennikov V., Penkovskii A. Prosumer in the district heating systems: Operating and reliability modeling. Energy Procedia 2019:158:2530–2535. https://doi.org/10.1016/j.egypro.2019.01.41110.1016/j.egypro.2019.01.411Search in Google Scholar

[46] Postnikov I. Methods for optimization of time redundancy of prosumer in district heating systems. Energy Reports 2020:6(2):214–220. https://doi.org/10.1016/j.egyr.2019.11.06510.1016/j.egyr.2019.11.065Search in Google Scholar

[47] Postnikov I. Providing the Reliability of Heating of Prosumers taking into account the Functioning of Their Own Heat Sources in District Heating Systems. IEEE Xplore Digital Library 2019 (International Multi-Conference on Industrial Engineering and Modern Technologies – FarEastCon):1–7. https://doi.org/10.1109/FarEastCon.2019.893491310.1109/FarEastCon.2019.8934913Search in Google Scholar