[1. A. Duggal and J. Minnebo, ‘The Floating Production, Storage and Offloading system – past, present and future’, in Offshore Technology Conference, Houston, Texas, USA, May 05, 2020, 2020, doi.org/10.4043/30514-MS.]Open DOISearch in Google Scholar
[2. M. M. L. Reis and W. L. R. Gallo, ‘Study of waste heat recovery potential and optimization of the power production by an organic Rankine cycle in an FPSO unit’, Energy Convers. Manag., vol. 157, pp. 409–422, 2018, doi.org/10.1016/j.enconman.2017.12.015.]Open DOISearch in Google Scholar
[3. O. Cherednichenko, S. Serbin, and M. Dzida, ‘Application of thermo-chemical technologies for conversion of associated gas in diesel-gas turbine installations for oil and gas floating units’, Pol. Marit. Res., vol. 26, no. 3, pp. 181–187, 2019, doi.org/10.2478/pomr-2019-0059.]Open DOISearch in Google Scholar
[4. M. Aligoodarz, M. Soleimanitehrani, H. Karrabi, and F. Ehsaniderakhshan, ‘Numerical simulation of SGT-600 gas turbine combustor, flow characteristics analysis, and sensitivity measurement with respect to the main fuel holes diameter’, Proc. Inst. Mech. Eng. G J. Aerosp. Eng., vol. 230, no. 13, pp. 2379–2391, 2016, doi.org/10.1177/0954410015625663.]Open DOISearch in Google Scholar
[5. O. Cherednichenko, S. Serbin, and M. Dzida, ‘Investigation of the combustion processes in the gas turbine module of an FPSO operating on associated gas conversion products’, Pol. Marit. Res., vol. 26, no. 4, pp. 149–156, 2019, http://doi.org/10.2478/pomr-2019-0077, doi.org/10.2478/pomr-2019-0077.]Open DOISearch in Google Scholar
[6. J. A. Vidoza, J. G. Andreasen, F. Haglind, M. M. L. dos Reis, and W. Gallo, ‘Design and optimization of power hubs for Brazilian off-shore oil production units’, Energy (Oxf.), vol. 176, pp. 656–666, 2019.10.1016/j.energy.2019.04.022]Search in Google Scholar
[7. C. Waldhelm, ‘Application of gas turbines on floater vessel for power generation service’, in ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition, Volume 2: Aircraft Engine; Marine; Microturbines and Small Turbomachinery, 1998.10.1115/98-GT-277]Search in Google Scholar
[8. S. Serbin, B. Diasamidze, and M. Dzida, ‘Investigations of the working process in a dual-fuel low-emission combustion chamber for an FPSO gas turbine engine’, Pol. Marit. Res., vol. 27, no. 3, pp. 89–99, 2020.10.2478/pomr-2020-0050]Search in Google Scholar
[9. Directive 2013/39/EU of the European Parliament and of the Council, Europa.eu, 2008. [Online]. Available: https://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2013:226:0001:0017:EN:PDF. [Accessed: 05 Mar 2021].]Search in Google Scholar
[10. S. Di Iorio, A. Magno, E. Mancaruso, and B. M. Vaglieco, ‘Analysis of the effects of diesel/methane dual fuel combustion on nitrogen oxides and particle formation through optical investigation in a real engine’, Fuel Process. Technol., vol. 159, pp. 200–210, 2017.10.1016/j.fuproc.2017.01.009]Search in Google Scholar
[11. S. I. Serbin, ‘Modeling and experimental study of operation process in a gas turbine combustor with a plasma-chemical element’, Combust. Sci. Technol., vol. 139, no. 1, pp. 137–158, 1998.10.1080/00102209808952084]Search in Google Scholar
[12. B. T. Diasamidze, S. V. Vilkul, and S. I. Serbin, ‘Theoretical investigations of a dual-fuel low-emission gas turbine combustor’, NTU KhPI Bull. Power Heat Eng. Process. Equip., no. 1, pp. 27–33, 2020.10.20998/2078-774X.2019.01.04]Search in Google Scholar
[13. C. K. Law, Combustion Physics. Cambridge, England: Cambridge University Press, 2010.]Search in Google Scholar
[14. J. Warnatz, U. Maas, and R. W. Dibble, Combustion: Physical and chemical fundamentals, modeling and simulation, experiments, pollutant formation, 3rd ed. Berlin, Germany: Springer, 2013.]Search in Google Scholar
[15. B. E. Launder and D. B. Spalding, Lectures in Mathematical Models of Turbulence. London: Academic Press.]Search in Google Scholar
[16. S. I. Serbin, I. B. Matveev, and G. B. Mostipanenko, ‘Investigations of the working process in a ‘lean-burn’ gas turbine combustor with plasma assistance’, IEEE Trans. Plasma Sci. IEEE Nucl. Plasma Sci. Soc., vol. 39, no. 12, pp. 3331–3335, 2011.]Search in Google Scholar
[17. D. Choudhury, Introduction to the Renormalization Group Method and Turbulence Modeling. Fluent Incorporated, 1973.]Search in Google Scholar
[18. B. Magnussen, ‘On the structure of turbulence and a generalized eddy dissipation concept for chemical reaction in turbulent flow’, in 19th Aerospace Sciences Meeting, St Louis, MO, USA,1981.10.2514/6.1981-42]Search in Google Scholar
[19. S. B. Pope, ‘Computationally efficient implementation of combustion chemistry using in situ adaptive tabulation’, Combust. Theory Model., vol. 1, no. 1, pp. 41–63, 1997.10.1080/713665229]Search in Google Scholar
[20. F. Wang, Y. Huang, and T. Deng, ‘Gas turbine combustor simulation with various turbulent combustion models’, in ASME Turbo Expo 2009: Power for Land, Sea, and Air, June 8–12, 2009, Orlando, Florida, USA, Volume 2: Combustion, Fuels and Emissions, 2009.10.1115/GT2009-59198]Search in Google Scholar
[21. A. C. Benim, S. Iqbal, W. Meier, F. Joos, and A. Wiedermann, ‘Numerical investigation of turbulent swirling flames with validation in a gas turbine model combustor’, Appl. Therm. Eng., vol. 110, pp. 202–212, 2017.10.1016/j.applthermaleng.2016.08.143]Search in Google Scholar
[22. Turbulence, heat and mass transfer: Proceedings of the Seventh International Symposium on Turbulence, Heat and Mass Transfer, ed. by K. Hanjalic, Palermo, Italy, 24-27 September, 2012.]Search in Google Scholar
[23. I. V. Novosselov and P. C. Malte, ‘Development and application of an eight-step global mechanism for CFD and CRN simulations of lean-premixed combustors’, J. Eng. Gas Turbines Power, vol. 130, no. 2, 2008.10.1115/1.2795787]Search in Google Scholar
[24. I. Matveev, S. Matveeva, S. Serbin, ‘Design and Preliminary Test Results of the Plasma Assisted Tornado Combustor’, Collection of Technical Papers - 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Cincinnati, OH, AIAA 2007-5628, vol. 6, 2007, pp. 6091-6098.10.2514/6.2007-5628]Search in Google Scholar
[25. G. M. Faeth, ‘Structure and atomization properties of dense turbulent sprays’, Symp. (Int.) Combust., vol. 23, no. 1, pp. 1345–1352, 1991.]Search in Google Scholar
[26. S. James, M. Anand, and S. Pope, ‘The Lagrangian PDF transport method for simulations of gas turbine combustor flows’, in 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Indiannapolis, Indiana, USA, 2002.10.2514/6.2002-4017]Search in Google Scholar
[27. G. Faeth, ‘Spray combustion models - A review’, in 17th Aerospace Sciences Meeting, New Orleans, USA, 1979.10.2514/6.1979-293]Search in Google Scholar
[28. W. A. Fiveland and A. S. Jamaluddin, ‘Three-dimensional spectral radiative heat transfer solutions by the discrete-ordinates method’, J. Thermophys. Heat Transf., vol. 5, no. 3, pp. 335–339, 1991.10.2514/3.268]Search in Google Scholar
[29. S. I. Serbin, A. V. Kozlovskyi, and K. S. Burunsuz, ‘Investigations of nonstationary processes in low emissive gas turbine combustor with plasma assistance’, IEEE Trans. Plasma Sci. IEEE Nucl. Plasma Sci. Soc., vol. 44, no. 12, pp. 2960–2964, 2016.]Search in Google Scholar
[30. I. B. Matveev, S. I. Serbin, V. V. Vilkul, and N. A. Goncharova, ‘Synthesis gas afterburner based on an injector type plasma-assisted combustion system’, IEEE Trans. Plasma Sci. IEEE Nucl. Plasma Sci. Soc., vol. 43, no. 12, pp. 3974–3978, 2015.]Search in Google Scholar
[31. I. Matveev, S. Serbin, T. Butcher, N. Tutu, “Flow Structure investigation in a “Tornado” Combustor,” Collection of Technical Papers - 4th International Energy Conversion Engineering Conference, vol. 2, 2006, pp. 1001-1013.10.2514/6.2006-4141]Search in Google Scholar
[32. S. Serbin., A. Kozlovskyi, K. Burunsuz, ‘Influence of plasma-chemical products on process stability in a low-emission gas turbine combustion chamber’, International Journal of Turbo and Jet Engines, 2021. Available from: https://doi.org/10.1515/tjeng-2020-0046.10.1515/tjeng-2020-0046]Search in Google Scholar
[33. G. F. Romanovsky, S. I. Serbin, V. M. Patlaychuk, Modern Gas Turbine Units of Russia and Ukraine. Mikolayiv: NUK, 2005.]Search in Google Scholar
[34. S. I. Serbin, I. B. Matveev, and G. B. Mostipanenko, ‘Plasma-assisted reforming of natural gas for GTL: Part II—modeling of the methane–oxygen reformer’, IEEE Trans. Plasma Sci. IEEE Nucl. Plasma Sci. Soc., vol. 43, no. 12, pp. 3964–3968, 2015.]Search in Google Scholar
[35. S. I. Serbin, I. B. Matveev, and N. A. Goncharova, ‘Plasma-assisted reforming of natural gas for GTL—part I’, IEEE Trans. Plasma Sci. IEEE Nucl. Plasma Sci. Soc., vol. 42, no. 12, pp. 3896–3900, 2014.]Search in Google Scholar
[36. I. B. Matveev, A. A. Tropina, S. I. Serbin, and V. Y. Kostyuk, ‘Arc Modeling in a Plasmatron Channel’, IEEE Trans. Plasma Sci. IEEE Nucl. Plasma Sci. Soc., vol. 36, no. 1, pp. 293–298, 2008.10.1109/TPS.2007.913876]Search in Google Scholar
[37. I. Matveev, S. Serbin, A. Mostipanenko, ‘Numerical Optimization of the “Tornado” Combustor Aerodynamic Parameters’, in 45th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, AIAA 2007-391, 2007.10.2514/6.2007-391]Search in Google Scholar