1. bookVolume 20 (2020): Issue 1 (June 2020)
Journal Details
License
Format
Journal
eISSN
1339-4533
First Published
16 Apr 2016
Publication timeframe
2 times per year
Languages
English
access type Open Access

Finishing of Tubes using Bonded Magnetic Abrasive Powder in an Abrasive Medium

Published Online: 31 Jul 2021
Volume & Issue: Volume 20 (2020) - Issue 1 (June 2020)
Page range: 1 - 11
Journal Details
License
Format
Journal
eISSN
1339-4533
First Published
16 Apr 2016
Publication timeframe
2 times per year
Languages
English
Abstract

Magnetic abrasive flow finishing (MAFF) is an unconventional process capable of producing fine finishing with machining forces controlled by a magnetic field. This process can be utilized for hard to achieve inner surfaces through the activity of extrusion pressure, combined with abrasion activity of a magnetic abrasive powder (MAP) in a polymeric medium. MAP is the key component in securing systematic removal of material and a decent surface finish in MAFF. The research background disclosed various methods such as sintering, adhesive based, mechanical alloying, plasma based, chemical, etc. for the production of bonded MAP. This investigation proposes bonded MAP produced by mechanical alloying followed by heat treatment. The experiments have been conducted on aluminum tubes to investigate the influence of different parameters like magnetic field density, extrusion pressure and number of working cycles. The bonded magnetic abrasive powder used in MAFF is very effective to finish tubes’ inner surfaces and finishing is significantly improved after processing.

Keywords

[1] Yamaguchi, H., Shinmura, T., Kobayashi, A.: JSME Int. J. Series C, vol. 44, no. 1, 2001, p. 275.10.1299/jsmec.44.275 Search in Google Scholar

[2] Yin, S., Shinmura, T.: J. Japan Soc. Abrasive Technol., vol. 46, no. 3, 2002, p. 141. Search in Google Scholar

[3] Bando, S., Tsukada, A., Kondo, Y.: J. Japan Soc. Abrasive Technol., vol. 45, no. 1, 2001, p. 46. Search in Google Scholar

[4] Mehrdad, V., Nader, V.: J. Vac. Sci. & Technol., vol. 27, no. 3, 2009, p. 1503.10.1116/1.3125270 Search in Google Scholar

[5] Chang, GW., Yan, BH., Hsu, RT.: Int. J. Mach. Tools & Manuf., vol. 42, 2002, p. 575.10.1016/S0890-6955(01)00153-5 Search in Google Scholar

[6] Singh, L., Khangura, SS., Mishra, PS.: Int. J. Abrasive Technol., vol. 3, no. 3, 2010, p. 215.10.1504/IJAT.2010.034052 Search in Google Scholar

[7] Singh, P., Singh, L., Singh S.: Powder Metallurgy Progress, vol. 19, no. 2, 2019, p. 82.10.1515/pmp-2019-0008 Search in Google Scholar

[8] Yamaguchi, H., Hanada, K.: J. Manuf. Sci. & Eng., vol. 130, 2008, p. 031107.10.1115/1.2917353 Search in Google Scholar

[9] Jain, VK., Adsul, SG.: Int. J. Mach. Tools & Manuf., vol. 40, 2000, p. 1003.10.1016/S0890-6955(99)00114-5 Search in Google Scholar

[10] Jha, S., Jain, VK.: Int. J. Mach. Tools & Manuf., vol. 44, 2004, p. 1019.10.1016/j.ijmachtools.2004.03.007 Search in Google Scholar

[11] Kar, KK., Ravikumar, NL., Kumar, P., Tailor, B., Ramkumar, J., Sathiyamoorthy, D.: J. Mater. Processing Technol., vol. 209, 2009, p. 2212.10.1016/j.jmatprotec.2008.05.012 Search in Google Scholar

[12] Kenda, J., Pusavec, F., Kermouche, G., Kopac, J.: CIRP Conference on Surface Integrity (CSI), vol. 19, 2011, p. 172.10.1016/j.proeng.2011.11.097 Search in Google Scholar

[13] Singh, S., Shan, HS.: Int. J. Mach. Tools & Manuf., vol. 42, 2002, p. 953.10.1016/S0890-6955(02)00021-4 Search in Google Scholar

[14] Singh, S., Shan, HS., Kumar, P.: J. Mater. Processing Technol., vol. 128, 2002, p. 155.10.1016/S0924-0136(02)00442-9 Search in Google Scholar

[15] Sankar, MR., Ramkumar, J., Jain, VK.: Wear 266, 2009, p.688.10.1016/j.wear.2008.08.017 Search in Google Scholar

[16] Tzeng, HJ., Yan, BH., Hsu, RT., Chow, HM.: Int. J. Adv. Manuf. Technol., vol. 34, 2007, p. 649.10.1007/s00170-006-0632-1 Search in Google Scholar

[17] Sran, LS., Khangura, SS., Singh, A.: In ASME International Manufacturing Science and Engineering Conference Notre Dame Indiana USA, 2012, p. 933. Search in Google Scholar

[18] Patil, MG., Chandra, K., Mishra, PS.: Int. J. of Sci. Eng. & Res., vol. 3, no. 10, 2012, p. 1. Search in Google Scholar

[19] Singh, A., Singh, S., Singh, L.: Int. J. Adv. Manag. Technol. Eng. Sci., vol. 7, no. 11, 2017, p. 246. Search in Google Scholar

[20] Dehghan, GA., Vahdati, M.: J. Eng. Manuf.: Part B, vol. 229, no. 9, 2015, p. 1517. Search in Google Scholar

[21] Sankar, MR., Jain, VK., Ramkumara, J., Joshi, YM.: Int. J. Mach. Tools & Manuf., vol. 51, no. 12, 2001, p. 947. Search in Google Scholar

[22] Sachin, S., Deepu, K., Ravi, SM., Jain, VK.: Int. J. Adv. Manuf. Technol., vol. 100, no. 5-8, 2018, p. 1165.10.1007/s00170-018-1912-2 Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo