[1. Akpa, J.G. (2012). Simulation of an Isothermal Catalytic Membrane Reactor for the Dehydrogenation of Ethylbenzene, Chem. Proc. Enginee. Res. 3, 14–28, ISSN 2225–0913.]Search in Google Scholar
[2. Arno Behr. (2017). Styrene production from ethyl benzene, Retrieved July 13, 2017 from (http://www.tc.bci.tu-dortmund.de/Downloads/Praktika/tc30_styrene_english.pdf.]Search in Google Scholar
[3. Hermann, Ch., Quicker, E. & Dittmeyer, R. (1997). Mathematical simulation of catalytic dehydrogenation of ethylbenzene. J. Memb. Sci. 136, 161–172. DOI: 10.1016/S0376-7388(97)81990-4.10.1016/S0376-7388(97)81990-4]Open DOISearch in Google Scholar
[4. PRWeb, World Styrene Market Dynamics Reviewed. Retrieved July, 13, 2017, from http://www.prweb.com/releases/2012/9/prweb9930130.htm.]Search in Google Scholar
[5. PRLog, Styrene Global Markets to 2020. Retrieved July, 13, 2017, from http://www.prlog.org/11727607-styrene-globalmarkets-to-2020-substitution-of-polystyrene-by-polypropylene.]Search in Google Scholar
[6. Snyder, J.D. & Subramaniam, B. (1994). Novel Reverse Flow Strategy for Ethylbenzene Dehydrogenation in A Packed bed Reactor. Chem. Enginee. Sci. 49(24), 5565–5601. DOI: 10.1016/0009-2509(94)00287-8.10.1016/0009-2509(94)00287-8]Open DOISearch in Google Scholar
[7. Haynes, T.N., Georgakis, C. & Caram, H.S. (1992). The Application of Reverse Flow Reactors to Endothermic Reactions. Chem. Enginee. Sci. 47(9–11), 2927–2932. DOI: 10.1016/0009-2509(92)87153-H.10.1016/0009-2509(92)87153-]Open DOISearch in Google Scholar
[8. Abdalla, B.K., Elnashaie, S.S.E.H., Alkhowaiter, S. & Elshishini, S.S. (1994). Intrinsic kinetics and industrial reactors modelling for the dehydrogenation of ethylbenzene to styrene on promoted iron oxide catalysts. Appl. Catal. A: General 113, 89–102. DOI: 10.1016/0926-860X(94)80243-2.10.1016/0926-860X(94)80243-2]Search in Google Scholar
[9. Hossain, M.M., Atanda, L., Al-Yassir, N., Al-Khattaf, S. (2012). Kinetics modeling of ethylbenzene dehydrogenation to styrene over a mesoporous alumina supported iron catalyst. Chem. Enginee. J. 207–208, 308–321. DOI: 10.1016/j.cej.2012.06.108.10.1016/j.cej.2012.06.108]Open DOISearch in Google Scholar
[10. Tamsilian, Y., Ebrahimi, A.N., Ramazani, S.A. & Abdollahzadeh, H. (2012). Modeling and sensitivity analysis of styrene monomer production process and investigation of catalyst behavior. Comp. Chem. Enginee. 40, 1–11. DOI: 10.1016/j.compchemeng.2012.01.014.10.1016/j.compchemeng.2012.01.014]Search in Google Scholar
[11. Zarubina, V. (2015). Oxidative dehydrogenation of ethylbenzene under industrially relevant conditions: on the role of catalyst structure and texture on selectivity and stability. PhD Thesis, University of Groningen, Netherland.]Search in Google Scholar
[12. Lee, W.J. (2005). Ethylbenzene Dehydrogenation into Styrene: Kinetic Modeling and Reactor Simulation. PhD Thesis, Texas A&M.]Search in Google Scholar
[13. Nederlof, C. (2012). Catalytic dehydrogenations of ethylbenzene to styrene. PhD thesis, University of Delft, Netherland.]Search in Google Scholar
[14. Park, S.E. & Chang, J.S. (2004). Novel Process for Styrene from Ethylbenzene with Carbon Dioxide. 227th National Meeting of the American-Chemical Society, MAR 28-APR 01, 2004 (pp U1076-U1076), Anaheim, CA, USA. ISSN: 0065-7727.]Search in Google Scholar
[15. Mimura, N. & Saito, M. (2000a). Dehydrogenation of ethylbenzene to styrene over Fe2O3/Al2O3 catalysts in the presence of carbon dioxide. Catal. Today 55, 173–178. DOI: 10.1016/S0920-5861(99)00236-9.10.1016/S0920-5861(99)00236-9]Open DOISearch in Google Scholar
[16. Mimura, N. & Saito, M. (200b). Dehydrogenation of ethylbenzene to styrene in the presence of CO2. Appl. Organometal. Chem. 14, 773–777. DOI: 10.1002/1099-0739(200012)1410.1002/1099-0739(200012)14]Open DOISearch in Google Scholar
[17. Cavani, F. & Trifiro, F. (1995). Alternative Processes for the Production of Styrene. Appl. Catal. A, 133, 219–239.DOI: 10.1016/0926-860X(95)00218-9.10.1016/0926-860X(95)00218-9]Open DOISearch in Google Scholar
[18. Mimura, N., Takahara, I., Saito, M., Hattori, T., Ohkuma, K. & Ando, M. (1998). Dehydrogenation of ethylbenzene over iron oxide-based catalyst in the presence of carbon dioxide. Catal. Today 45, 60–64. DOI: 10.1016/S0920-5861(98)00246-6.10.1016/S0920-5861(98)00246-6]Open DOISearch in Google Scholar
[19. Abdalla, B.K., Elnashaie, S.S. E.H. (1994). Catalytic Dehydrogenation of Ethylbenzene to Styrene in Membrane Reactors. AIChE 40(12), 2055–2059. DOI: 10.1002/aic.690401215.10.1002/aic.690401215]Open DOISearch in Google Scholar
[20. Vaezi, M.J., Babaluo, A.A. & Shafiei, S. (2015). Modeling of Ethylbenzene Dehydrogenation Membrane Reactor to Investigate the Potential Application of a Microporous Hydroxy Sodalite Membrane. J. Chem. Petrol. Enginee. 49(1), 51–62. ISSN: 2423–6721.]Search in Google Scholar
[21. Gundersen, T. (2017). Chapter 2.1 in Handbook of Process Integration Heat Integration -Targets and Heat Exchanger Network Design, Retrieved July, 7, 2017. http://www.ivt.ntnu.no/ept/fag/tep4215/innhold/Handbook%20of%20PI%20-%20Chapter%202-1.pdf.]Search in Google Scholar
[22. Yoon, S.G. Lee, J. & Park, S. (2007). Heat integration analysis for an industrial ethylbenzene plant using pinch analysis. Appl. Ther. Enginee. 27, 886–893. DOI: 10.1016/j.applthermaleng.2006.09.001.10.1016/j.applthermaleng.2006.09.001]Open DOISearch in Google Scholar
[23. Carra. S. & Fomi. L. (1965). Kinetics of Catalytic Dehydrogenation of Ethylbenzene to Styrene. Engng. Chem. Proc. Des. Dev. 4, 281–285. DOI: 10.1021/i260015a009.10.1021/i260015a009]Open DOISearch in Google Scholar
[24. Modell, D.J. (1972). Optimization theory and applications: optimum temperature simulation of the styrene monomer reaction. Chem. Enginee. Comput. Vol. 1. AIChE, New York.]Search in Google Scholar
[25. Lee, W.J. & Froment, G.F. (2008). Ethylbenzene Dehydrogenation into Styrene: Kinetic Modeling and Reactor Simulation. Ind. Eng. Chem. Res. 47, 9183–9194. DOI: 10.1021/ie071098u.10.1021/ie071098u]Open DOISearch in Google Scholar
[26. James, D.H. & Castor, W.M. (1994). Ullmann’s encyclopedia of industrial chemistry. Wiley. Vol. 25, 5th ed., p. 329.]Search in Google Scholar
[27. Styrene Production, Retrieved July, 13, 2017. http://cbe.statler.wvu.edu/files/d/cd80e618-6d29-41a9-a854-275a995ed6cf/styrene12.pdf.]Search in Google Scholar
[28. Hanyak, M.E. (2011). Companion in Chemical Engineering: An Instructional Supplement, CreateSpace Independent Publishing Platform, USA.]Search in Google Scholar
[29. Smith, J.M., Van Ness, H.C. & Abbott, M.M. (2005). Introduction to Chemical Engineering Thermodynamics, 6th edition, McGraw Hills, USA.]Search in Google Scholar
[30. Wall, G. (2011). Life Cycle Exergy Analysis of Renewable Energy System. Renew. Energy J. 4, 72–77. DOI: 10.2174/1876387101004010072.10.2174/1876387101004010072]Open DOISearch in Google Scholar
[31. Martinaitis, V., Streckiene, G., Biekša, D. & Bielskus, J. (2016). The exergy efficiency assessment of heat recovery exchanger for air handling units, using a state property – Coenthalpy. Appl. Therm. Enginee. 108, 388–397. DOI: 10.1016/j.applthermaleng.2016.07.118.10.1016/j.applthermaleng.2016.07.118]Open DOISearch in Google Scholar
[32. Shenoy, U.V. (1995). Heat Exchange Network Synthesis: Process Optimization by Energy and Resource Analysis. Gulf Publ. Co., Houston, TX.]Search in Google Scholar
[33. Linnhoff, B. (1993). Pinch analysis- A state of the art overview. Trans. Inst. Chem. Eng. Chem. Eng. Res. Des. 71, Part A5, 503–522. ISSN: 0263-8762.]Search in Google Scholar
[34. Gundersen, T. & Naess, L. (1988). The synthesis of cost optimal heat exchanger networks: An industrial review of the state of the art. Comput. Chem. Enginee. 12(6), 503–530. DOI: 10.1016/0890-4332(90)90084-W.10.1016/0890-4332(90)90084-]Open DOISearch in Google Scholar
[35. Douglas, J.M. (1988). Conceptual Design of Chemical Processes, McGraw Hill, New York.]Search in Google Scholar
[36. El-Halwagi, M.M. (2012). Sustainable Design Through Process Integration, 1st Ed., Butterworth-Heinemann, USA.10.1016/B978-1-85617-744-3.00001-1]Search in Google Scholar
[37. Klemes, J. (2013). Handbook of Process Integration (PI), Woodhead Publishing, USA.10.1533/9780857097255]Search in Google Scholar