This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
Project Everyone: “The Global Goals”. https://www.globalgoals.org/, accessed 02/2022.Search in Google Scholar
Huang L, Krigsvoll G, Johansen F, Liu Y and Zhang X: “Carbon emission of global construction sector”. Renewable and Sustainable Energy Reviews Vol. 81, 2018, pp. 1906–1916. doi: https://doi.org/10.1016/j.rser.2017.06.001. 61-66.Search in Google Scholar
Pardo N, Moya JA and Mercier A: “Prospective on the energy efficiency and co2 emissions in the eu cement industry”. Energy Vol. 36, No. 5, 2011, pp. 3244–3254. doi: https://doi.org/10.1016/j.energy.2011.03.016.Search in Google Scholar
Miller SA, John VM, Pacca SA and Horvath A: Carbon dioxide reduction potential in the global cement industry by 2050. Cement and Concrete Research Vol. 114, 2018, pp. 115–124. doi: https://doi.org/10.1016/j.cemconres.2017.08.026.Search in Google Scholar
Svensk Betong. Betongindikatorn 2022. https://www.svenskbetong.se accessed 12/2023.Search in Google Scholar
LKAB. Förstärkning av berget – en säkerhetsfråga. 2021. https://lkab.com/nyheter/, accessed 12/2023. (In Swedish).Search in Google Scholar
Heidelberg materials. Förbifart Stockholm: totalt 18 km tunnel. https://www.betong.heidelbergmaterials.se/, accessed 12/2023. (In Swedish).Search in Google Scholar
UNFCCC: The Paris Agreement. 2022 https://unfccc.int/process-and-meetings/the-paris-agreement/the-paris-agreement, accessed 02/2022.Search in Google Scholar
Scrivener KL, John VM and Gartner EM: “Eco-efficient cements: Potential economically viable solutions for a low-co2 cement-based materials industry”. Cement and Concrete Research, Vol. 114, 2018, pp. 2–26. doi: https://doi.org/10.1016/j.cemconres.2018.03.015.Search in Google Scholar
Bryne LE: Time dependent material properties of shotcrete for hard rock tunnelling. Ph.D Thesis. KTH Royal Institute of Technology, Department of Civil and Architectural Engineering. Stockholm, Sweden, 2014.Search in Google Scholar
Norwegian Tunnelling Society: “Rock support in Norwegian tunnelling”. Publication No. 19, Oslo, Norway, 2010.Search in Google Scholar
Bernard S: “Shotcreting in Australia”. Technical report, 2010, Concrete Institute of Australia, Rhodes, Australia, 2010.Search in Google Scholar
Neuner M, Cordes T, Drexel M and Hofstetter G: “Time-dependent material properties of shotcrete : Experimental and numerical study”. Materials, Vol. 10, 2017, pp. 1–17, doi: https://doi.org/10.3390/ma10091067.Search in Google Scholar
CEN: EN 206: “Concrete - Specification, performance, production and conformity”. Technical report, European Committee for Standardisation, Brussels, Belgium, 2021.Search in Google Scholar
Sjölander A, Ansell A and Nordström E: “On the design of permanent shotcrete rock support”. Fibers, 11, 2023. doi: https://doi.org/10.3390/fib11020020.Search in Google Scholar
di Prisco, M., Kanstad, T., Plizzari, G., Minelli, F., Haus, A. “Eurocode 2 – Annex L – European Harmonized Standard for Steel Fibre Reinforced Concrete”. In: Serna, P., Llano-Torre, A., Martí-Vargas, J.R., Navarro-Gregori, J. (eds). Fibre Reinforced Concrete: Improvements and Innovations II. BEFIB 2021. RILEM Bookseries, Vol 36. Springer, Cham. doi: https://doi.org/10.1007/978-3-030-83719-8_47Search in Google Scholar
Brodd E and Östlund L: “Environmental and technical evaluation of cement reduction and test methods for fibre reinforced shotcrete in tunnels”. Master of Science Thesis. KTH Royal Institute of Technology, Department of Civil and Architectural Engineering. Stockholm, Sweden, 2022.Search in Google Scholar
Andersson R, Stripple H, Gustafsson T and Ljungkrantz C: “Carbonation as a method to improve climate performance for cement based material”. Cement and Concrete Research Vol. 124, 2019. doi: https://doi.org/10.1016/j.cemconres.2019.105819.Search in Google Scholar
Favier A, De Wolf C, Scrivener K and Habert G: “A sustainable future for the European Cement and Concrete Industry: Technology assessment for full decarbonisation of the industry by 2050”. Technical report, ETH Zurich, 2018.Search in Google Scholar
Gencel O, Karadag O, Oren OH and Bilir T (2021) Steel slag and its applications in cement and concrete technology: A review. Construction and Building Materials, Vol. 283, 2021, 122783. doi: https://doi.org/10.1016/j.conbuildmat.2021.122783.Search in Google Scholar
Hooton RD: “Canadian use of ground granulated blast-furnace slag as a supplementary cementing material for enhanced performance of concrete”. Canadian Journal of Civil Engineering, Vol. 27, No. 4, 2000, pp. 754–760. doi: https://doi.org/10.1139/l00-014.Search in Google Scholar
Shi C, Meyer C and Behnood A: “Utilization of copper slag in cement and concrete”. Resources, Conservation and Recycling, Vol. 52, No. 10, 2008, pp. 1115–1120, doi: https://doi.org/10.1016/j.resconrec.2008.06.008.Search in Google Scholar
Galan I, Baldermann A, Kusterle W, Dietzel M and Mittermayr F: “Durability of shotcrete for underground support - Review and update”. Construction and Building Materials, Vol. 202, 2019, pp 465–493, doi: https://doi.org/10.1016/j.conbuildmat.2018.12.151.Search in Google Scholar
Ansell A: “In situ testing of young shotcrete subjected to vibrations from blasting”. Tunnelling and Underground Space Technology, Vol. 19 No. 6, 2004, pp 587–596. doi: https://doi.org/10.1016/j.tust.2004.01.059.Search in Google Scholar
Ahmed L and Ansell A: “Laboratory investigation of stress waves in young shotcrete on rock”. Magazine of Concrete Research, Vol. 64, No 10, 2012, pp 899–908, doi: https://doi.org/10.1680/macr.11.00119.Search in Google Scholar
Sjölander A, Ledin J and Enzell J: “Structural assessment of cracked fibre-reinforced shotcrete tunnel linings: The impact of horizontal confinement and rock bolts”. Submitted to: Structural Concrete.Search in Google Scholar
Sjölander A: “Structural behaviour of shotcrete in hard rock tunnels”. Ph.D Thesis. KTH Royal Institute of Technology, Department of Civil and Architectural Engineering, Stockholm, Sweden, 2020.Search in Google Scholar
CEN: EN 14487-1: “Sprayed concrete - Part 1: Definitions, specifications and conformity”. Technical report, European Committee for Standardisation, Brussels, Belgium, 2005.Search in Google Scholar
Svensk Byggtjänst. “AMA Anläggning 20”. Svensk Byggtjänst, Stockholm, Sweden, 2022. (In Swedish).Search in Google Scholar
Mehta KP and J. M. Monteiro P: “Concrete: Microstructure, Properties, and Materials”. Fourth edn., McGraw-Hill Education, California, United States, 2014.Search in Google Scholar
CEN: EN 206: “Concrete – Specification, performance, production and conformity”. Technical report, European Committee for Standardisation, Brussels, Belgium, 2021.Search in Google Scholar
Nordström E and Hassanzadeh M: “Involvement of fly ash in hydro power concrete”. Technical report, Energiforsk, Stockholm, Sweden, 2018. (In Swedish).Search in Google Scholar
CEN: EN 197-1: “Cement – Part 1: Composition, specifications and conformity criteria for common cements”. Technical report, European Committee for Standardisation, Brussels, Belgium, 2011.Search in Google Scholar
Wally GB, Magalh˜aes FC and Pinto da Silva Filho LC: “From prescriptive to performance-based: An overview of international trends in specifying durable concretes”. Journal of Building Engineering, Vol. 52, 2022, 104359. doi: https://doi.org/10.1016/j.jobe.2022.104359.Search in Google Scholar
Burström PG and Nilvér K (2018) “Building materials - manufacturing, properties and use”. Third edition., Studentlitteratur, Lund, Sweden, 2018. (In Swedish).Search in Google Scholar
Cembureau (Environmental Product Declaration, 2020): “Portland Cement (CEM I) produced in Europe”. https://cembureau.eu/media/3lplreko/epd-for-cement-cem-i.pdf, accessed 02/2022.Search in Google Scholar
Cementa (Environmental Product Declaration, 2019): “Portland Cement CEM I 42.5 NSR3/MH/LA”. https://www.cementa.se/sv/cement-anlaggningscement-slite, accessed 02/2022.Search in Google Scholar
Norcem (Environmental Product Declaration): “Norcem Anleggsement, Brevik - CEM I 52,5 N”. https://www.norcem.no/en/anleggsement, accessed 02/2022.Search in Google Scholar
Norcem (Environmental Product Declaration): “Norcem Anleggsement SR, Brevik - CEM I 42,5N-SR3”. https://www.norcem.no/en/norcem-anleggsement-sr, accessed 02/2022.Search in Google Scholar
Swecem: “Declaration of product for Swecem GGBS”. 2018. https://swecem.se/contentassets/57aa22710d2142509a9cc51b88ac9548/declaration-of-product.pdf. accessed 02/2022.Search in Google Scholar
Thomas Cement: “Technical information: Slagg Bremen”. 2018. . https://thomasconcretegroup.com/images/pdf/Thomas_Cement/Thomas-Cement_C-lab_Teknisk-information_Slagg-Bremen_180129.pdf. (In Swedish), accessed 02/2022.Search in Google Scholar
Salvador R, Rambo D, Bueno R, Silva K and Figueiredo A: “On the use of blast-furnace slag in sprayed concrete applications”. Construction and Building Materials, Vol. 218, 2019. doi: https://doi.org/10.1016/j.conbuildmat.2019.05.132.Search in Google Scholar
Polder R, Nijland T, De Rooij M, Larsen C and Pedersen B: “Innovation based on tradition: Blast furnace slag cement for durable concrete structures in Norway” Proceedings, 1st Concrete Innovation Conference, Oslo, Norway, 2014.Search in Google Scholar
Ishida A, Iwasaki M and Araki A: “Shotcrete with blended cement and calcium aluminate based powder accelerator for improved durability”. In Shotcrete: Elements of a system XI, Sydney, Australia, 2010.Search in Google Scholar
Özbay E, Erdemir M and Durmus I: “Utilization and efficiency of ground granulated blast furnace slag on concrete properties – A review”. Construction and Building Materials, Vol. 105, 2016, pp. 423–434. doi: https://doi.org/10.1016/j.conbuildmat.2015.12.153.Search in Google Scholar
Gesoglu M, Güneyisi E and Özbay E: “Properties of self-compacting concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume”. Construction and Building Materials, Vol. 23, No. 5, 2009, pp. 1847–1854. doi: https://doi.org/10.1016/j.conbuildmat.2008.09.015.Search in Google Scholar
Borges PH, Costa JO, Milestone NB, Lynsdale CJ and Streatfield RE: “Carbonation of ch and c–s–h in composite cement pastes containing high amounts of bfs”. Cement and Concrete Research, Vol. 40, No. 2, 2010, pp 284–292. doi: https://doi.org/10.1016/j.cemconres.2009.10.020.Search in Google Scholar
Sjölander A and Ansell A: “Investigation of non-linear drying shrinkage for end-restrained shotcrete of varying thickness”. Magazine of Concrete Research, Vol. 70, No. 6, 2018, pp. 271–279. Doi: https://doi.org/10.1680/jmacr.17.00171.Search in Google Scholar
Malmgren L: “Interaction between shotcrete and rock”. Ph.D Thesis. Luleå University of Technology, Luleå, Sweden, 2005.Search in Google Scholar
Lagerblad B, Fjällberg L and Vogt C: “Shrinkage and durability of shotcrete”. In Shotcrete elements of a system, Sydney, Australia, 2010.Search in Google Scholar
Darquennes A, Rozi‘ere E, Khokhar M, Turcry P, Loukili A and Grondin F: “Long-term deformations and cracking risk of concrete with high content of mineral additions”. Materials and Structures Vol. 45, 2012, pp 1705–1716, doi: https://doi.org/10.1617/s11527-012-9867-5.Search in Google Scholar
El-Chabib H and Syed A: “Properties of self-consolidating concrete made with high volumes of supplementary cementitious materials”. Journal of Materials in Civil Engineering Vol. 25, No. 11, 2013, pp 1579–1586, doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000733.Search in Google Scholar
CEN: EN 12390-3: “Testing hardened concrete – Part 3: Compressive strength of test specimens”. Technical report, European Committee for Standardisation, Brussels, Belgium, 2019.Search in Google Scholar
SIS: SS 137003: “Concrete - Application of SS-EN 206:2013+A2:2021 in Sweden”. Technical report, Swedish Standards Institute, Stockholm, Sweden, 2021. (In Swedish).Search in Google Scholar
