Open Access

Verification of Coordinate Measuring Machine Using a Gauge Block

Teodor Tóth

Teodor Tóth

Institute of Special Engineering Processes, Department of Biomedical Engineering and Measurement, Faculty of Mechanical Engineering, Technical University in KošiceKošice, Slovakia
Search for this author on
Sciendo|Google Scholar
Tóth, Teodor
, 
Miroslav Dovica

Miroslav Dovica

Institute of Special Engineering Processes, Department of Biomedical Engineering and Measurement, Faculty of Mechanical Engineering, Technical University in KošiceKošice, Slovakia
Search for this author on
Sciendo|Google Scholar
Dovica, Miroslav
, 
Ján Buša

Ján Buša

Laboratory of Information Technologies, Joint Institute for Nuclear ResearchDubna, Russia
Search for this author on
Sciendo|Google Scholar
Buša, Ján
 and 
Ján Buša

Ján Buša

Laboratory of Information Technologies, Joint Institute for Nuclear ResearchDubna, Russia
Search for this author on
Sciendo|Google Scholar
Buša, Ján
  
Dec 24, 2024
Verification of Coordinate Measuring Machine Using a Gauge Block's Cover Image
About this article
Previous Article
Next Article
Cite
Download Cover
Published Online: Dec 24, 2024
Page range: 226 - 233
Received: May 31, 2024
Accepted: Nov 20, 2024
DOI: https://doi.org/10.2478/msr-2024-0030
Keywords
© 2024 Teodor Tóth et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Two orthogonal least squares methods of the points approximation by a set of parallel planes are presented. Such an approximation can be used to study the measurement details of using a coordinate measuring machine (CMM). A calibrated gauge block and a CMM with a touch measuring probe were used in the experimental verification. A comparison of the different CMM strategies is provided.

Language:
English
Publication timeframe:
6 times per year
Journal Subjects:
Engineering, Electrical Engineering, Control Engineering, Metrology and Testing
Journal RSS Feed